what do you mean . The call is going to unity with original redirecting call as ' 3002' instead of ‘3002’.
??? do you want to ring 3001 then no-answer to 3002 vm? if that is the case just use alias command, with cfw 2220 let me know if you still have problem Sara Prabahar M <[email protected]> wrote: Hi, I am running SRST with H323. My phones are registered to SRST GW. When a call comes to one of the registered phone (3002), on no answer, the call is forwarded to voice mail. I am having the workaround configured for incorrect ISDN cause for redirecting number. The call is going to unity with original redirecting call as ' 3002' instead of ‘3002’. I am not sure there this extra character is prefixed. I tried playing with RDNIS configs on the GW and didn’t get it worked. Could someone tell me how to fix this problem. Thanks, Prabahar SRST GW Config: BR1#sh run | begin call-manager-fallback call-manager-fallback secondary-dialtone 9 max-conferences 1 gain -6 transfer-system full-consult ip source-address 192.168.12.1 port 2000 max-ephones 10 max-dn 10 dual-line sdspfarm units 4 sdspfarm transcode sessions 2 transfer-pattern .T default-destination 2600 voicemail 2600 alias 1 2001 to 2002 preference 2 cfw 2600 timeout 3 call-forward pattern .T call-forward busy 2600 call-forward noan 2600 timeout 12 moh flash:music-on-hold.au multicast moh 239.215.1.1 port 16384 route 192.168.12.1 time-zone 8 date-format dd-mm-yy cor incoming keys-all default ! ! vm-integration pattern ext-to-ext no-answer * FDN pattern ext-to-ext busy * FDN pattern trunk-to-ext no-answer * FDN pattern trunk-to-ext busy * FDN ! BR1#debug isdn q931 debug isdn q931 is ON. BR1# .Apr 10 19:26:21.844: ISDN Se2/1:23 Q931: RX <- SETUP pd = 8 callref = 0x0240 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98381 Exclusive, Channel 1 Calling Party Number i = 0x2180, '911' Plan:ISDN, Type:National Called Party Number i = 0xA1, '3002' Plan:ISDN, Type:National .Apr 10 19:26:21.856: ISDN Se2/1:23 Q931: TX -> CALL_PROC pd = 8 callref = 0x8240 Channel ID i = 0xA98381 Exclusive, Channel 1 .Apr 10 19:26:21.860: ISDN Se2/1:23 Q931: TX -> ALERTING pd = 8 callref = 0x8240 BR1# BR1# .Apr 10 19:26:28.249: %FAN-3-FAN_FAILED: Fans had a rotation error reported. .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for sw-type 0x2 is 0x2 0x1, Calling num 911 .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for sw-type 0x2 is 0x2 0x1, Called num 14088532600*3002 .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: TX -> SETUP pd = 8 callref = 0x0098 Bearer Capability i = 0x8090A2 Standard = CCITT Transfer Capability = Speech Transfer Mode = Circuit Transfer Rate = 64 kbit/s Channel ID i = 0xA98386 Exclusive, Channel 6 Calling Party Number i = 0x2180, '911' Plan:ISDN, Type:National Called Party Number i = 0xA1, '14088532600*3002' Plan:ISDN, Type:National Redirecting Number i = 0xFF, '3002' Plan:Reserved, Type:Reserved .Apr 10 19:26:33.889: ISDN Se2/1:23 Q931: RX <- CALL_PROC pd = 8 callref = 0x8098 Channel ID i = 0xA98386 Exclusive, Channel 6 .Apr 10 19:26:33.961: ISDN Se2/1:23 Q931: RX <- ALERTING pd = 8 callref = 0x8098 Progress Ind i = 0x8088 - In-band info or appropriate now available .Apr 10 19:26:34.321: ISDN Se2/1:23 Q931: RX <- CONNECT pd = 8 callref = 0x8098 .Apr 10 19:26:34.325: %ISDN-6-CONNECT: Interface Serial2/1:5 is now connected to 14088532600*3002 N/A .Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT_ACK pd = 8 callref = 0x0098 .Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT pd = 8 callref = 0x8240 .Apr 10 19:26:34.337: ISDN Se2/1:23 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x0240 .Apr 10 19:26:34.337: %ISDN-6-CONNECT: Interface Serial2/1:0 is now connected to 911 N/A BR1# BR1# .Apr 10 19:26:42.017: ISDN Se2/1:23 Q931: RX <- DISCONNECT pd = 8 callref = 0x0240 Cause i = 0x8290 - Normal call clearing .Apr 10 19:26:42.021: %ISDN-6-DISCONNECT: Interface Serial2/1:0 disconnected from 911 , call lasted 7 seconds .Apr 10 19:26:42.021: ISDN Se2/1:23 Q931: TX -> RELEASE pd = 8 callref = 0x8240 .Apr 10 19:26:42.029: ISDN Se2/1:23 Q931: RX <- RELEASE_COMP pd = 8 callref = 0x0240 .Apr 10 19:26:42.041: %ISDN-6-DISCONNECT: Interface Serial2/1:5 disconnected from 14088532600*3002 , call lasted 7 seconds .Apr 10 19:26:42.041: ISDN Se2/1:23 Q931: TX -> DISCONNECT pd = 8 callref = 0x0098 Cause i = 0x8090 - Normal call clearing .Apr 10 19:26:42.049: ISDN Se2/1:23 Q931: RX <- RELEASE pd = 8 callref = 0x8098 .Apr 10 19:26:42.053: ISDN Se2/1:23 Q931: TX -> RELEASE_COMP pd = 8 callref = 0x0098 BR1# Unity trace: 12:15:38:921,AvDiagnostics_MC,155,2804,-1,,SkinnyTSP,12,[Thread 0x00000AF4] [Device 5] Receive StationCallInfoMessage (388 bytes) callingPartyName='' callingParty='911' calledPartyName='Voicemail' calledParty='2600' lineInstance=1 callReference=33555382 callType=1=TsInBoundCall originalCalledPartyName='' originalCalledParty=' 3002' lastRedirectingPartyName='SA Ph2' lastRedirectingParty='3002' originalCdpnRedirectReason=0=RfrNoReason lastRedirectingReason=2=RfrCallFwdRNA cgpnVoiceMailbox='' cdpnVoiceMailbox='2600' originalCdpnVoiceMailbox='' lastRedirectingVoiceMailbox='3002' callInstance=1 callSecurityStatus=0=CallSecurityStatusUnknown partyPIRestrictionBits=0 -------------------------------------- Power up the Internet with Yahoo! Toolbar. http://pr.mail.yahoo.co.jp/toolbar/
