A call from PSTN coming to a phone (3002) registered in SRST GW. Phone is not answering the call and forwarded to VM due to "noan" configured. Since there is problem in redirect cause code, I am sending the call to CCM using vm-integration config. There it is forwarded to Unity. Since the original called number is prefixed with a special charactor, the call is not going to the correct mail box (3002). It is going to the opening greeting.
Take a look at the unity trace in the bottom. Any idea why the extra character is prefixed and to fix the problem? Thanks. 2009/4/10 <[email protected]>: > what do you mean . The call > is going to unity with original redirecting call as ' 3002' instead of > ‘3002’. > > ??? > do you want to ring 3001 then no-answer to 3002 vm? > if that is the case just use alias command, with cfw 2220 > let me know if you still have problem > > Sara > > Prabahar M <[email protected]> wrote: > Hi, > I am running SRST with H323. My phones are registered to SRST GW. > When a call comes to one of the registered phone (3002), on no answer, > the call is forwarded to voice mail. I am having the workaround > configured for incorrect ISDN cause for redirecting number. The call > is going to unity with original redirecting call as ' 3002' instead of > ‘3002’. I am not sure there this extra character is prefixed. I tried > playing with RDNIS configs on the GW and didn’t get it worked. > > Could someone tell me how to fix this problem. > > Thanks, > Prabahar > > SRST GW Config: > > BR1#sh run | begin call-manager-fallback > call-manager-fallback > secondary-dialtone 9 > max-conferences 1 gain -6 > transfer-system full-consult > ip source-address 192.168.12.1 port 2000 > max-ephones 10 > max-dn 10 dual-line > sdspfarm units 4 > sdspfarm transcode sessions 2 > transfer-pattern .T > default-destination 2600 > voicemail 2600 > alias 1 2001 to 2002 preference 2 cfw 2600 timeout 3 > call-forward pattern .T > call-forward busy 2600 > call-forward noan 2600 timeout 12 > moh flash:music-on-hold.au > multicast moh 239.215.1.1 port 16384 route 192.168.12.1 > time-zone 8 > date-format dd-mm-yy > cor incoming keys-all default > ! > ! > vm-integration > pattern ext-to-ext no-answer * FDN > pattern ext-to-ext busy * FDN > pattern trunk-to-ext no-answer * FDN > pattern trunk-to-ext busy * FDN > ! > > BR1#debug isdn q931 > debug isdn q931 is ON. > BR1# > .Apr 10 19:26:21.844: ISDN Se2/1:23 Q931: RX <- SETUP pd = 8 callref = > 0x0240 > Bearer Capability i = 0x8090A2 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98381 > Exclusive, Channel 1 > Calling Party Number i = 0x2180, '911' > Plan:ISDN, Type:National > Called Party Number i = 0xA1, '3002' > Plan:ISDN, Type:National > .Apr 10 19:26:21.856: ISDN Se2/1:23 Q931: TX -> CALL_PROC pd = 8 > callref = 0x8240 > Channel ID i = 0xA98381 > Exclusive, Channel 1 > .Apr 10 19:26:21.860: ISDN Se2/1:23 Q931: TX -> ALERTING pd = 8 > callref = 0x8240 > BR1# > BR1# > .Apr 10 19:26:28.249: %FAN-3-FAN_FAILED: Fans had a rotation error reported. > .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for > sw-type 0x2 is 0x2 0x1, Calling num 911 > .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for > sw-type 0x2 is 0x2 0x1, Called num 14088532600*3002 > .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: TX -> SETUP pd = 8 callref = > 0x0098 > Bearer Capability i = 0x8090A2 > Standard = CCITT > Transfer Capability = Speech > Transfer Mode = Circuit > Transfer Rate = 64 kbit/s > Channel ID i = 0xA98386 > Exclusive, Channel 6 > Calling Party Number i = 0x2180, '911' > Plan:ISDN, Type:National > Called Party Number i = 0xA1, '14088532600*3002' > Plan:ISDN, Type:National > Redirecting Number i = 0xFF, '3002' > Plan:Reserved, Type:Reserved > .Apr 10 19:26:33.889: ISDN Se2/1:23 Q931: RX <- CALL_PROC pd = 8 > callref = 0x8098 > Channel ID i = 0xA98386 > Exclusive, Channel 6 > .Apr 10 19:26:33.961: ISDN Se2/1:23 Q931: RX <- ALERTING pd = 8 > callref = 0x8098 > Progress Ind i = 0x8088 - In-band info or appropriate now available > .Apr 10 19:26:34.321: ISDN Se2/1:23 Q931: RX <- CONNECT pd = 8 callref = > 0x8098 > .Apr 10 19:26:34.325: %ISDN-6-CONNECT: Interface Serial2/1:5 is now > connected to 14088532600*3002 N/A > .Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT_ACK pd = 8 > callref = 0x0098 > .Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT pd = 8 callref = > 0x8240 > .Apr 10 19:26:34.337: ISDN Se2/1:23 Q931: RX <- CONNECT_ACK pd = 8 > callref = 0x0240 > .Apr 10 19:26:34.337: %ISDN-6-CONNECT: Interface Serial2/1:0 is now > connected to 911 N/A > BR1# > BR1# > .Apr 10 19:26:42.017: ISDN Se2/1:23 Q931: RX <- DISCONNECT pd = 8 > callref = 0x0240 > Cause i = 0x8290 - Normal call clearing > .Apr 10 19:26:42.021: %ISDN-6-DISCONNECT: Interface Serial2/1:0 > disconnected from 911 , call lasted 7 seconds > .Apr 10 19:26:42.021: ISDN Se2/1:23 Q931: TX -> RELEASE pd = 8 callref = > 0x8240 > .Apr 10 19:26:42.029: ISDN Se2/1:23 Q931: RX <- RELEASE_COMP pd = 8 > callref = 0x0240 > .Apr 10 19:26:42.041: %ISDN-6-DISCONNECT: Interface Serial2/1:5 > disconnected from 14088532600*3002 , call lasted 7 seconds > .Apr 10 19:26:42.041: ISDN Se2/1:23 Q931: TX -> DISCONNECT pd = 8 > callref = 0x0098 > Cause i = 0x8090 - Normal call clearing > .Apr 10 19:26:42.049: ISDN Se2/1:23 Q931: RX <- RELEASE pd = 8 callref = > 0x8098 > .Apr 10 19:26:42.053: ISDN Se2/1:23 Q931: TX -> RELEASE_COMP pd = 8 > callref = 0x0098 > BR1# > > Unity trace: > > 12:15:38:921,AvDiagnostics_MC,155,2804,-1,,SkinnyTSP,12,[Thread > 0x00000AF4] [Device 5] Receive StationCallInfoMessage (388 bytes) > callingPartyName='' callingParty='911' calledPartyName='Voicemail' > calledParty='2600' lineInstance=1 callReference=33555382 > callType=1=TsInBoundCall originalCalledPartyName='' > originalCalledParty=' 3002' lastRedirectingPartyName='SA Ph2' > lastRedirectingParty='3002' originalCdpnRedirectReason=0=RfrNoReason > lastRedirectingReason=2=RfrCallFwdRNA cgpnVoiceMailbox='' > cdpnVoiceMailbox='2600' originalCdpnVoiceMailbox='' > lastRedirectingVoiceMailbox='3002' callInstance=1 > callSecurityStatus=0=CallSecurityStatusUnknown > partyPIRestrictionBits=0 > > ________________________________ > Power up the Internet with Yahoo! Toolbar. >
