In your vm-integration command change the * to a # so it should be

vm-integration
 pattern ext-to-ext no-answer # FDN     
 pattern ext-to-ext busy # FDN     
 pattern trunk-to-ext no-answer # FDN     
 pattern trunk-to-ext busy # FDN     



-----Original Message-----
From: [email protected] 
[mailto:[email protected]] On Behalf Of Prabahar M
Sent: Friday, April 10, 2009 8:27 PM
To: [email protected]
Subject: Re: [OSL | CCIE_Voice] H323 SRST - Unity gets OriginalCalledParty 
#prefixed with "" when fwding to Unity on noan for PSTN calls

 A call from PSTN coming to a phone (3002) registered in SRST GW.
Phone is not answering the call and forwarded to VM due to "noan"
configured. Since there is problem in redirect cause code, I am
sending the call to CCM using vm-integration config. There it is
forwarded to Unity. Since the original called number is prefixed with
a special charactor, the call is not going to the correct mail box
(3002). It is going to the opening greeting.

 Take a look at the unity trace in the bottom. Any idea why the extra
character is prefixed and to fix the problem?

Thanks.

2009/4/10  <[email protected]>:
> what do you mean . The call
> is going to unity with original redirecting call as ' 3002' instead of
> '3002'.
>
> ???
> do you want to ring 3001 then no-answer to 3002 vm?
> if that is the case just use alias command, with cfw 2220
> let me know if you still have problem
>
> Sara
>
> Prabahar M <[email protected]> wrote:
> Hi,
> I am running SRST with H323. My phones are registered to SRST GW.
> When a call comes to one of the registered phone (3002), on no answer,
> the call is forwarded to voice mail.  I am having the workaround
> configured for incorrect ISDN cause for redirecting number. The call
> is going to unity with original redirecting call as ' 3002' instead of
> '3002'. I am not sure there this extra character is prefixed. I tried
> playing with RDNIS configs on the GW and didn't get it worked.
>
> Could someone tell me how to fix this problem.
>
> Thanks,
> Prabahar
>
> SRST GW Config:
>
> BR1#sh run | begin call-manager-fallback
> call-manager-fallback
> secondary-dialtone 9
> max-conferences 1 gain -6
> transfer-system full-consult
> ip source-address 192.168.12.1 port 2000
> max-ephones 10
> max-dn 10 dual-line
> sdspfarm units 4
> sdspfarm transcode sessions 2
> transfer-pattern .T
> default-destination 2600
> voicemail 2600
> alias 1 2001 to 2002 preference 2 cfw 2600 timeout 3
> call-forward pattern .T
> call-forward busy 2600
> call-forward noan 2600 timeout 12
> moh flash:music-on-hold.au
> multicast moh 239.215.1.1 port 16384 route 192.168.12.1
> time-zone 8
> date-format dd-mm-yy
> cor incoming keys-all default
> !
> !
> vm-integration
> pattern ext-to-ext no-answer * FDN
> pattern ext-to-ext busy * FDN
> pattern trunk-to-ext no-answer * FDN
> pattern trunk-to-ext busy * FDN
> !
>
> BR1#debug isdn q931
> debug isdn q931 is              ON.
> BR1#
> .Apr 10 19:26:21.844: ISDN Se2/1:23 Q931: RX <- SETUP pd = 8  callref =
> 0x0240
>         Bearer Capability i = 0x8090A2
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
>         Calling Party Number i = 0x2180, '911'
>                 Plan:ISDN, Type:National
>         Called Party Number i = 0xA1, '3002'
>                 Plan:ISDN, Type:National
> .Apr 10 19:26:21.856: ISDN Se2/1:23 Q931: TX -> CALL_PROC pd = 8
> callref = 0x8240
>         Channel ID i = 0xA98381
>                 Exclusive, Channel 1
> .Apr 10 19:26:21.860: ISDN Se2/1:23 Q931: TX -> ALERTING pd = 8
> callref = 0x8240
> BR1#
> BR1#
> .Apr 10 19:26:28.249: %FAN-3-FAN_FAILED: Fans had a rotation error reported.
> .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for
> sw-type 0x2 is 0x2 0x1, Calling num 911
> .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: Applying typeplan for
> sw-type 0x2 is 0x2 0x1, Called num 14088532600*3002
> .Apr 10 19:26:33.861: ISDN Se2/1:23 Q931: TX -> SETUP pd = 8  callref =
> 0x0098
>         Bearer Capability i = 0x8090A2
>                 Standard = CCITT
>                 Transfer Capability = Speech
>                 Transfer Mode = Circuit
>                 Transfer Rate = 64 kbit/s
>         Channel ID i = 0xA98386
>                 Exclusive, Channel 6
>         Calling Party Number i = 0x2180, '911'
>                 Plan:ISDN, Type:National
>         Called Party Number i = 0xA1, '14088532600*3002'
>                 Plan:ISDN, Type:National
>         Redirecting Number i = 0xFF, '3002'
>                 Plan:Reserved, Type:Reserved
> .Apr 10 19:26:33.889: ISDN Se2/1:23 Q931: RX <- CALL_PROC pd = 8
> callref = 0x8098
>         Channel ID i = 0xA98386
>                 Exclusive, Channel 6
> .Apr 10 19:26:33.961: ISDN Se2/1:23 Q931: RX <- ALERTING pd = 8
> callref = 0x8098
>         Progress Ind i = 0x8088 - In-band info or appropriate now available
> .Apr 10 19:26:34.321: ISDN Se2/1:23 Q931: RX <- CONNECT pd = 8  callref =
> 0x8098
> .Apr 10 19:26:34.325: %ISDN-6-CONNECT: Interface Serial2/1:5 is now
> connected to 14088532600*3002 N/A
> .Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT_ACK pd = 8
> callref = 0x0098
> .Apr 10 19:26:34.325: ISDN Se2/1:23 Q931: TX -> CONNECT pd = 8  callref =
> 0x8240
> .Apr 10 19:26:34.337: ISDN Se2/1:23 Q931: RX <- CONNECT_ACK pd = 8
> callref = 0x0240
> .Apr 10 19:26:34.337: %ISDN-6-CONNECT: Interface Serial2/1:0 is now
> connected to 911 N/A
> BR1#
> BR1#
> .Apr 10 19:26:42.017: ISDN Se2/1:23 Q931: RX <- DISCONNECT pd = 8
> callref = 0x0240
>         Cause i = 0x8290 - Normal call clearing
> .Apr 10 19:26:42.021: %ISDN-6-DISCONNECT: Interface Serial2/1:0
> disconnected from 911 , call lasted 7 seconds
> .Apr 10 19:26:42.021: ISDN Se2/1:23 Q931: TX -> RELEASE pd = 8  callref =
> 0x8240
> .Apr 10 19:26:42.029: ISDN Se2/1:23 Q931: RX <- RELEASE_COMP pd = 8
> callref = 0x0240
> .Apr 10 19:26:42.041: %ISDN-6-DISCONNECT: Interface Serial2/1:5
> disconnected from 14088532600*3002 , call lasted 7 seconds
> .Apr 10 19:26:42.041: ISDN Se2/1:23 Q931: TX -> DISCONNECT pd = 8
> callref = 0x0098
>         Cause i = 0x8090 - Normal call clearing
> .Apr 10 19:26:42.049: ISDN Se2/1:23 Q931: RX <- RELEASE pd = 8  callref =
> 0x8098
> .Apr 10 19:26:42.053: ISDN Se2/1:23 Q931: TX -> RELEASE_COMP pd = 8
> callref = 0x0098
> BR1#
>
> Unity trace:
>
> 12:15:38:921,AvDiagnostics_MC,155,2804,-1,,SkinnyTSP,12,[Thread
> 0x00000AF4] [Device 5] Receive StationCallInfoMessage (388 bytes)
> callingPartyName='' callingParty='911' calledPartyName='Voicemail'
> calledParty='2600' lineInstance=1 callReference=33555382
> callType=1=TsInBoundCall originalCalledPartyName=''
> originalCalledParty=' 3002' lastRedirectingPartyName='SA Ph2'
> lastRedirectingParty='3002' originalCdpnRedirectReason=0=RfrNoReason
> lastRedirectingReason=2=RfrCallFwdRNA cgpnVoiceMailbox=''
> cdpnVoiceMailbox='2600' originalCdpnVoiceMailbox=''
> lastRedirectingVoiceMailbox='3002' callInstance=1
> callSecurityStatus=0=CallSecurityStatusUnknown
> partyPIRestrictionBits=0
>
> ________________________________
> Power up the Internet with Yahoo! Toolbar.
>

Reply via email to