oops. this can be ignored. DIdn't see you started a new thread and the question was answered very well by a number of people. ________________________________ From: [email protected] [[email protected]] On Behalf Of Michael Ciarfello [[email protected]] Sent: Saturday, July 18, 2009 9:29 PM To: Nish Tarpara; [email protected] Subject: Re: [OSL | CCIE_Voice] X-Lite phone call
If they have you configure a full PRI and the question doesn't state you can't use it then YES. Otherwise, you know the answer. ________________________________ From: [email protected] [[email protected]] On Behalf Of Nish Tarpara [[email protected]] Sent: Saturday, July 18, 2009 3:09 PM To: [email protected] Subject: Re: [OSL | CCIE_Voice] X-Lite phone call Hi, Please advise if " ccm-manager config " & " ccm-manager config server " command can be used in voice lab. Regards, Nish ________________________________ From: [email protected] To: [email protected] Date: Sat, 18 Jul 2009 11:48:35 +0100 CC: [email protected] Subject: Re: [OSL | CCIE_Voice] X-Lite phone call Don’t forget Digest Credentials under End User configuration Digest Credentials: 2003 Confirm Digest Credentials: 2003 De : [email protected] [mailto:[email protected]] De la part de Nizar JAFRI Envoyé : samedi 18 juillet 2009 10:44 À : 'Michael Ciarfello' Cc : [email protected] Objet : Re: [OSL | CCIE_Voice] X-Lite phone call Use the procedure below to register X-lite with CUCM, The user name must be the xlite’s directory number Select Menu : User Management ->End User->Add New : User ID: 2003 Password: 2003 (you can anythings) Confirm Password: 2003 (you can anythings) PIN: 2003 (you can anythings) Confirm PIN: 2003 (you can anythings) Last Name: 2003 And You Save. Next Your Select Menu : Device -> Phone -> Add New Select Product type : Third-party SIP Device (Basic) -> Next MAC Address* : (your MAC PC/laptop) Decription: SEP(your MAC PC/laptop) Device Pool*efault Phone Buttom Template*:Third-party SIP Device (Basic) Common Phone Profile : Standard Common Phone Profile(default) Location : Hub_None (Default) PROTOCOL SPECIFIC INFORMATION : Presence Group : Standard Presence Group (Default) MTP Preferred Originating Codec : 711Ulaw (gray) Device Security Profile : Third-party SIP Device Basic-Standard SIP non-Secure Profile SIP Profile : Standard SIP Profile Digest User : 2003 And you Save "Click on the Reset Phone Button to have the Changes take Effect" --> Select OK In left line : "line[1]-Add a New DN" Directory Number* : 2003 and you Save And Your Select Againt Menu : User Management -> End User Click in 2003 and click in "Device Association" -> Directory Number, Begin With 2003 -> Find and Check SEPSEP(your MAC PC/laptop) and then your click SAVE SELECTED/CHANGES In X-Lite Setting : Open Menu : Properties of Account User Details : 2003 User Name : 2003 Password : 2003 Authorization User Name : 2003 Domain : ip Add CM Domain Proxy : Check "Register With Domain and Receive Incoming Calls" Send Outbound Via : Check "Domain" Good luck. De : [email protected] [mailto:[email protected]] De la part de Michael Ciarfello Envoyé : samedi 18 juillet 2009 02:58 À : c george; [email protected]; [email protected] Objet : Re: [OSL | CCIE_Voice] X-Lite phone call It works in CCM also. Use third party basic or advanced. Go back through the archives and seek a post on 7/4/2009 with the subject: RE: [OSL | CCIE_Voice] X-lite in CM 7.0 There's an xlite config for CCM and a great discussion by Bill Talley on the differences between basic vs advanced. ________________________________ From: [email protected] [[email protected]] On Behalf Of c george [[email protected]] Sent: Friday, July 17, 2009 4:19 PM To: [email protected]; [email protected] Subject: Re: [OSL | CCIE_Voice] X-Lite phone call isnt the xlite for cme only ? Respectfully Charles George ________________________________ Date: Fri, 17 Jul 2009 13:06:52 -0700 From: [email protected] To: [email protected] Subject: [OSL | CCIE_Voice] X-Lite phone call hi, anybody experience this ? I register x-lite SIP phone and phone register fine, but when I make call it said "service unavilable" , when I make sure using DNA it showing call should go out using MGCP gateway (register ok in CCM 7.) pls help tks ________________________________ Lauren found her dream laptop. Find the PC that’s right for you.<http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290> __________ NOD32 4255 (20090717) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com<http://www.eset.com/> __________ NOD32 4255 (20090717) Information __________ This message was checked by NOD32 antivirus system. http://www.eset.com<http://www.eset.com/> ________________________________ Windows Live Messenger: Celebrate 10 amazing years with free winks and emoticons. Get Them Now<http://clk.atdmt.com/UKM/go/157562755/direct/01/>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
