My knowledge about RSVP is very little RSVP Location CAC issue not working.
After configuring RSPV all calls between HQ and BR1 invoking AAR. Sh ip rsvp reservation return nothing *********************************** SiteA#sh ip rsvp RSVP: enabled (on 2 interface(s)) Signalling: Refresh interval (msec): 30000 Refresh misses: 4 Rate Limiting: enabled Burst: 8 Limit: 37--------------------------------------------As I have configured the bandwidth to 180K shouldn't this be reflection the correct values instead of 37 Maxsize: 2000 Period (msec): 20 Max rate (msgs/sec): 400 Refresh Reduction: disabled ACK delay (msec): 250 Initial retransmit delay (msec): 1000 Local epoch: 0xBE1FBD Message IDs: in use 0, total allocated 0, total freed 0 Neighbors: 0 Raw IP encap: 0 UDP encap: 0 Raw IP, UDP encap: 0 Hello: Fast-Reroute/Reroute: Disabled Statistics: Disabled Graceful Restart: Disabled Graceful Restart: Disabled Refresh interval: 10000 msecs Refresh misses: 4 DSCP: 0x30 Advertised restart time: 5 msecs Advertised recovery time: 0 msecs Maximum wait for recovery: 3600000 msecs Fast-Reroute: PSBs w/ Local protection desired Yes: 0 No: 0 Local policy: COPS: Generic policy settings: Default policy: Accept all Preemption: Disabled *********************************** Here is my config snip interface Serial0/0/0.200 point-to-point ip address 10.230.1.5 255.255.255.252 snmp trap link-status frame-relay interface-dlci 201 ip rsvp bandwidth 180 sccp local GigabitEthernet0/0.201 sccp ccm 10.10.20.1 identifier 2 version 6.0 sccp ccm 10.10.20.2 identifier 1 version 6.0 sccp ! sccp ccm group 1 bind interface GigabitEthernet0/0.201 associate ccm 1 priority 1 associate ccm 2 priority 2 associate profile 2 register hq-rsvp ! dspfarm profile 2 mtp codec g711ulaw codec pass-through rsvp maximum sessions software 4 associate application SCCP CONFIDENTIALITY - The information contained in this electronic mail message is confidential and is intended solely for the addressee(s). If you are not an authorised recipient of this message please contact UXC Getronics Australia immediately by reply email and destroy/delete this message from your computer. Any unauthorised form of reproduction of this message, or part thereof, is strictly prohibited. DISCLAIMER - Unless specifically indicated otherwise, the views and opinions expressed in this email are those of the sender and not UXC Getronics Australia. While we endeavour to protect our network from computer viruses, UXC Getronics Australia does not warrant that this email or any attachments are free of viruses or any other defects or errors. It is the duty of the recipient to virus scan and otherwise test any information contained in this email before loading onto any computer system. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com