the point is the MTP is not even registered to the UCM.
On Fri, Oct 16, 2009 at 3:52 AM, Michael Ciarfello <mciarfe...@iplogic.com>wrote: > Make sure your MTP's are in the correct device pools. I just went > through this and I can't believe I messed this up. The CCM traces had the > phone devices requesting the proper 24k, but the MTPs were requesting 64k > (if I was reading that mess correctly.) I was calling from BR1 to BR2. My > Br1_Rsvp_MTP was in BR1_DP. My BR2_Rsvp_MTP was in Br1_DP (i'm with > stupid.) So the MTP was in the same region and requesitng 64k. So the > debug ip rsvp resv was requesting 96. > > The MTP should also be last in the MRGL. Look at the trace files why. You > will see it try the transcoder first and state it's not RSVP capable, so it > moves on to the next MRG in the list. This is why the PG says to not put > RSVP MTP before other MTPs. Something needing a regular MTP will grab that > first and incorrectly steal your allocation. You can see that in the trace > files also. I think you need to turn on Locations based tracing in the > service parameters to see this. > > > ------------------------------ > *From:* ccie_voice-boun...@onlinestudylist.com [ > ccie_voice-boun...@onlinestudylist.com] On Behalf Of Omotayo [ > adefilabi...@gmail.com] > *Sent:* Thursday, October 15, 2009 10:38 PM > *To:* OSL Group > *Subject:* [OSL | CCIE_Voice] Volumme 2 lab 5 > > Hello, > i configured the lab as required, but when i try to cal from HQ to any > branch. i get Not enough Bandwidth even when i press the message button > Any one with an idea of how to fix this > > Also, on the branch two router i have TRANSCODER and MTP as configured. the > transcoder registered with the UCM but the MTP has failed to > sccp local Loopback0 > sccp ccm 10.10.210.10 identifier 2 > sccp ccm 10.10.210.11 identifier 1 > sccp > ! > sccp ccm group 1 > bind interface Loopback0 > associate ccm 1 priority 1 > associate ccm 2 priority 2 > associate profile 2 register br2-rsvp-agent > associate profile 1 register xcoder > ! > dspfarm profile 1 transcode > codec g711ulaw > codec g711alaw > codec g729ar8 > codec g729abr8 > maximum sessions 4 > associate application SCCP > ! > dspfarm profile 2 mtp > codec pass-through > codec g729r8 > rsvp > maximum sessions software 4 > associate application SCCP > > Thanks for the antcipated support >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
