even though technically your configuration OUGHT to work, i've found that cucm doesnt sorta breaks sometimes when you've got it configured liek this. It wants to do 7.11 between the MTP and the device local to that MTP - your MTP is capable only of doign 729. your transcoder is not enabled for RSVP. Enable RSVP under the transcoder dspfarm profiles at each site, reregister them, and try again.
Also, fix your "sccp ccm" statements. There should be a version argument at the end of each of them specifying the version of CUCM. in many IOS version, it will default to 3.0, or another version that doesnt support RSVP, or the sw IOS Enhanced MTP, which actually registers with a different devicetype in the skinny register message than the hardware based transcode profile. ...And actually, not having that version statement is probably what's causing it not to register. Let us know how this goes. -Peter On Sat, Oct 17, 2009 at 1:52 AM, Mike Thompson <[email protected]> wrote: > Actually that looks like before that point. Make sure that you have dsp > services dspfarm configured under the voice card. > Sent from my phone, apologies for any typos. > On Oct 16, 2009, at 10:44 PM, Michael Ciarfello <[email protected]> > wrote: > > Normal now in later IOS versions. Reminding you the rsvp keyword has not > been configured. > ________________________________ > From: [email protected] > [[email protected]] On Behalf Of Omotayo > [[email protected]] > Sent: Friday, October 16, 2009 5:38 PM > To: OSL Group > Subject: Re: [OSL | CCIE_Voice] Volumme 2 lab 5 > > Hello, > When i try to configure the mtp i keep getting the information below > dspfarm profile 1 mtp > rpm_user_create_profile_entry :: Resource provider not registered > Any ideas > THANKS > > On Fri, Oct 16, 2009 at 3:38 AM, Omotayo <[email protected]> wrote: >> >> Hello, >> i configured the lab as required, but when i try to cal from HQ to any >> branch. i get Not enough Bandwidth even when i press the message button >> Any one with an idea of how to fix this >> >> Also, on the branch two router i have TRANSCODER and MTP as configured. >> the transcoder registered with the UCM but the MTP has failed to >> sccp local Loopback0 >> sccp ccm 10.10.210.10 identifier 2 >> sccp ccm 10.10.210.11 identifier 1 >> sccp >> ! >> sccp ccm group 1 >> bind interface Loopback0 >> associate ccm 1 priority 1 >> associate ccm 2 priority 2 >> associate profile 2 register br2-rsvp-agent >> associate profile 1 register xcoder >> ! >> dspfarm profile 1 transcode >> codec g711ulaw >> codec g711alaw >> codec g729ar8 >> codec g729abr8 >> maximum sessions 4 >> associate application SCCP >> ! >> dspfarm profile 2 mtp >> codec pass-through >> codec g729r8 >> rsvp >> maximum sessions software 4 >> associate application SCCP >> >> Thanks for the antcipated support > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
