Actually that looks like before that point. Make sure that you have
dsp services dspfarm configured under the voice card.
Sent from my phone, apologies for any typos.
On Oct 16, 2009, at 10:44 PM, Michael Ciarfello
<[email protected]> wrote:
Normal now in later IOS versions. Reminding you the rsvp keyword
has not been configured.
From: [email protected] [ccie_voice-
[email protected]] On Behalf Of Omotayo
[[email protected]]
Sent: Friday, October 16, 2009 5:38 PM
To: OSL Group
Subject: Re: [OSL | CCIE_Voice] Volumme 2 lab 5
Hello,
When i try to configure the mtp i keep getting the information below
dspfarm profile 1 mtp
rpm_user_create_profile_entry :: Resource provider not registered
Any ideas
THANKS
On Fri, Oct 16, 2009 at 3:38 AM, Omotayo <[email protected]>
wrote:
Hello,
i configured the lab as required, but when i try to cal from HQ to
any branch. i get Not enough Bandwidth even when i press the message
button
Any one with an idea of how to fix this
Also, on the branch two router i have TRANSCODER and MTP as
configured. the transcoder registered with the UCM but the MTP has
failed to
sccp local Loopback0
sccp ccm 10.10.210.10 identifier 2
sccp ccm 10.10.210.11 identifier 1
sccp
!
sccp ccm group 1
bind interface Loopback0
associate ccm 1 priority 1
associate ccm 2 priority 2
associate profile 2 register br2-rsvp-agent
associate profile 1 register xcoder
!
dspfarm profile 1 transcode
codec g711ulaw
codec g711alaw
codec g729ar8
codec g729abr8
maximum sessions 4
associate application SCCP
!
dspfarm profile 2 mtp
codec pass-through
codec g729r8
rsvp
maximum sessions software 4
associate application SCCP
Thanks for the antcipated support
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
