Otto,
How can this be a codec problem if calling the BR2 SCCP phones works?
On Tue, Nov 17, 2009 at 7:19 AM, Otto Sanchez <o...@ipexpert.com> wrote:
> Hello,
>
> Just want to make a couple of tests and get back to the list,
>
> 1.- I see in your configuration you are missing the bind all command for
> the voice service voip-> sip section make sure it's configured
> 2.- Would you please use g711ulaw along the call path?
> 1.- Make sure the codec (region settings) between hq and h225
> trunk is g711
> 2.- Make sure your incoming dial peer has g711ulaw configured
> in br2
> dial-peer voice XX voip
> incoming called-number .
> codec g711ulaw
>
> Just want to take out codec problems out of the equation,
>
> If still doesnt work, please send debug voip dialpeer and debug ccsip mess
> for br2 rtr,
>
> Thanks and regards,
>
>
>
> On Tue, Nov 17, 2009 at 9:05 AM, Chris Kagadis (kagadis.com) <
> ch...@kagadis.com> wrote:
>
>> Otto,
>> Thank you, here is the config I have for Branch 2 so far;
>>
>> Building configuration...
>>
>> Current configuration : 5798 bytes
>> !
>> ! No configuration change since last restart
>> !
>> version 12.4
>> service timestamps debug datetime msec
>> service timestamps log datetime msec
>> no service password-encryption
>> !
>> hostname P1-BR2-VG
>> !
>> boot-start-marker
>> boot system flash c2800nm-ipvoicek9-mz.124-22.T.bin
>> boot-end-marker
>> !
>> card type e1 0 0
>> logging message-counter syslog
>> enable secret 5 $1$w7xh$igOXy49ZIS1WtyyyF1bFg/
>> !
>> no aaa new-model
>> clock timezone CEST 1
>> network-clock-participate wic 0
>> !
>> dot11 syslog
>> ip source-route
>> !
>> !
>> ip cef
>> ip dhcp excluded-address 10.1.202.1 10.1.202.49
>> ip dhcp excluded-address 10.1.202.70 10.1.202.255
>> !
>> ip dhcp pool PHONES
>> network 10.1.202.0 255.255.255.0
>> option 150 ip 10.4.202.1
>> default-router 10.1.202.1
>> !
>> !
>> no ipv6 cef
>> multilink bundle-name authenticated
>> !
>> !
>> !
>> !
>> isdn switch-type primary-net5
>> !
>> !
>> !
>> voice service voip
>> allow-connections h323 to h323
>> allow-connections h323 to sip
>> allow-connections sip to h323
>> allow-connections sip to sip
>> sip
>> registrar server expires max 600 min 60
>> !
>> !
>> voice class codec 1
>> codec preference 1 g711ulaw
>> codec preference 2 g729r8
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> !
>> voice register global
>> mode cme
>> source-address 10.1.202.1 port 5060
>> max-dn 2
>> max-pool 2
>> create profile sync 0011154364354438
>> !
>> voice register dn 1
>> number 3005
>> name BR2PH5
>> !
>> voice register template 1
>> dialplan 1
>> !
>> voice register dialplan 1
>> type 7940-7960-others
>> pattern 1 3...
>> pattern 2 999
>> !
>> voice register pool 1
>> id mac 001C.58A3.1386
>> type 7961
>> number 1 dn 1
>> dtmf-relay sip-notify
>> description +3432143005
>> codec g711ulaw
>> !
>> !
>> voice translation-rule 1
>> rule 1 /^\(3...\)$/ /3214\1/
>> !
>> voice translation-rule 2
>> rule 1 /^32143/ /3/
>> rule 2 /^\+3432143/ /3/
>> !
>> !
>> voice translation-profile 4digitDNIS
>> translate called 2
>> !
>> voice translation-profile 8digitANI
>> translate calling 1
>> !
>> !
>> voice-card 0
>> !
>> !
>> !
>> !
>> !
>> username cisco privilege 15 password 0 cisco
>> archive
>> log config
>> hidekeys
>> !
>> !
>> controller E1 0/0/0
>> pri-group timeslots 1-3,16
>> !
>> controller E1 0/0/1
>> !
>> !
>> !
>> !
>> !
>> interface Loopback0
>> ip address 10.4.202.1 255.255.255.0
>> h323-gateway voip interface
>> h323-gateway voip id SPAIN ipaddr 10.4.200.1 1719
>> h323-gateway voip h323-id P1-BR2-VG
>> h323-gateway voip tech-prefix 1#
>> !
>> interface FastEthernet0/0
>> no ip address
>> shutdown
>> duplex auto
>> speed auto
>> !
>> interface Service-Engine0/0
>> no ip address
>> shutdown
>> !
>> interface FastEthernet0/1
>> no ip address
>> shutdown
>> duplex auto
>> speed auto
>> !
>> interface FastEthernet0/2/0
>> switchport trunk native vlan 200
>> switchport mode trunk
>> switchport voice vlan 400
>> !
>> interface FastEthernet0/2/1
>> switchport trunk native vlan 200
>> switchport mode trunk
>> switchport voice vlan 400
>> !
>> interface FastEthernet0/2/2
>> switchport trunk native vlan 200
>> switchport mode trunk
>> switchport voice vlan 400
>> !
>> interface FastEthernet0/2/3
>> switchport trunk native vlan 200
>> switchport mode trunk
>> switchport voice vlan 400
>> !
>> interface Serial0/0/0:15
>> no ip address
>> encapsulation hdlc
>> isdn switch-type primary-net5
>> isdn incoming-voice voice
>> isdn outgoing display-ie
>> no cdp enable
>> !
>> interface Serial0/1/0
>> no ip address
>> encapsulation frame-relay
>> frame-relay lmi-type cisco
>> !
>> interface Serial0/1/0.1 point-to-point
>> ip address 172.16.100.6 255.255.255.252
>> snmp trap link-status
>> frame-relay interface-dlci 104
>> !
>> interface Vlan1
>> no ip address
>> !
>> interface Vlan200
>> ip address 10.2.202.1 255.255.255.0
>> !
>> interface Vlan400
>> ip address 10.1.202.1 255.255.255.0
>> !
>> router ospf 100
>> log-adjacency-changes
>> network 10.1.202.0 0.0.0.255 area 0
>> network 10.2.202.0 0.0.0.255 area 0
>> network 10.3.202.0 0.0.0.255 area 0
>> network 10.4.202.0 0.0.0.255 area 0
>> network 172.16.100.4 0.0.0.3 area 0
>> !
>> ip forward-protocol nd
>> ip route 0.0.0.0 0.0.0.0 172.16.100.5
>> !
>> ip http server
>> no ip http secure-server
>> ip http path flash:gui
>> !
>> !
>> !
>> !
>> !
>> !
>> control-plane
>> !
>> !
>> !
>> voice-port 0/0/0:15
>> translation-profile incoming 4digitDNIS
>> !
>> ccm-manager fax protocol cisco
>> !
>> mgcp fax t38 ecm
>> !
>> !
>> !
>> dial-peer voice 999 pots
>> translation-profile outgoing 8digitANI
>> destination-pattern 999
>> port 0/0/0:15
>> forward-digits 3
>> !
>> dial-peer voice 100 pots
>> incoming called-number .
>> direct-inward-dial
>> !
>> dial-peer voice 51 voip
>> destination-pattern [51]...
>> voice-class codec 1
>> session target ras
>> tech-prefix 1#
>> no vad
>> !
>> !
>> gateway
>> timer receive-rtp 1200
>> !
>> sip-ua
>> !
>> !
>> telephony-service
>> no auto-reg-ephone
>> em logout 0:0 0:0 0:0
>> max-ephones 10
>> max-dn 10
>> ip source-address 10.4.202.1 port 2000
>> system message CCIE Voice Lab
>> max-conferences 8 gain -6
>> web admin system name admin password cisco
>> dn-webedit
>> time-webedit
>> transfer-system full-consult
>> create cnf-files version-stamp 7960 Nov 16 2009 17:49:19
>> !
>> !
>> ephone-dn 1 octo-line
>> number 3001
>> description +3432143001
>> name BR1PH1
>> !
>> !
>> ephone-dn 2 octo-line
>> number 3002
>> description +3432143001
>> name BR1PH2
>> !
>> !
>> ephone-dn 3 octo-line
>> number 3003
>> description +3432143003
>> name BR1PH3
>> !
>> !
>> ephone 1
>> mac-address 0021.A0D9.D00E
>> username "br2ph1"
>> type 7965
>> button 1:1
>> !
>> !
>> !
>> ephone 2
>> mac-address 001E.4A5F.36E0
>> username "br2ph2"
>> type 7961
>> button 1:2
>> !
>> !
>> !
>> ephone 3
>> mac-address 0021.70F8.8281
>> username "br2ph3"
>> type CIPC
>> button 1:3
>> !
>> !
>> line con 0
>> line aux 0
>> line 194
>> no activation-character
>> no exec
>> transport preferred none
>> transport input all
>> transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
>> line vty 0 4
>> exec-timeout 0 0
>> login local
>> !
>> scheduler allocate 20000 1000
>> ntp server 10.1.200.2
>> end
>>
>> P1-BR2-VG#
>>
>>
>> On Tue, Nov 17, 2009 at 5:57 AM, Otto Sanchez <o...@ipexpert.com> wrote:
>>
>>> Hi,
>>>
>>> Would you please send us the br2 rtr configuration?,
>>>
>>> How is the br2 rtr receiving calls from the wan ? does it have a specific
>>> dial peer? if so, does it have g711ulaw codec into it?, if not, are you
>>> using transcoding?, where?, is your br2 sip phone configured with codec
>>> g711ulaw?
>>>
>>> Thanks,
>>>
>>>
>>>
>>> On Mon, Nov 16, 2009 at 9:31 PM, Nara Shikamaru <shikam...@kagadis.com
>>> > wrote:
>>>
>>>> This question always seems to pop up in different forms on this
>>>> mailing list. I've had this troubhle in the past and managed to overcome
>>>> it
>>>> before but I am perplexed at it now.
>>>>
>>>> HQ phones can dial SCCP phones at BR2. They can not dial SIP phones at
>>>> BR2. In the past, the recommendation has been to enable Inbound FastStart
>>>> on the gatekeeper (CUCM-side). Personally, I've never needed to check it
>>>> before to get it to work for whatever reason. This time, however, enabling
>>>> it has fixed half my problem. I am now able to call SCCP HQ phones from my
>>>> BR2 SIP phone. No luck the other way around.
>>>>
>>>> I've enabled allow-connections for both HQ and BR2. Does anyone know
>>>> where the problem may be?
>>>>
>>>> --
>>>> -Shikamaru
>>>>
>>>> _______________________________________________
>>>> For more information regarding industry leading CCIE Lab training,
>>>> please visit www.ipexpert.com
>>>>
>>>>
>>>
>>>
>>> --
>>> Regards,
>>>
>>> Otto Sanchez
>>> CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE.
>>> Sr. Support Engineer - IPexpert, Inc.
>>> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>>>
>>> _______________________________________________
>>> For more information regarding industry leading CCIE Lab training, please
>>> visit www.ipexpert.com
>>>
>>>
>>
>
>
> --
> Regards,
>
> Otto Sanchez
> CCIE #25592 (Voice), CCVP,CCSP,CCNP,CCDA,MCSE.
> Sr. Support Engineer - IPexpert, Inc.
> URL: http://www.IPexpert.com <http://www.ipexpert.com/>
>
--
-Shikamaru
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
