That's very intersting in-deed. Thank you very much Jeff and Otto for your kind guidence. Appreciate it !!! Hi-Five :) to both of you !!!!
--- On Thu, 12/31/09, Jeff Cotter <jcot...@voxns.com> wrote: From: Jeff Cotter <jcot...@voxns.com> Subject: Re: [OSL | CCIE_Voice] Trying to disable PC Port on CME To: "anil batra" <anil...@yahoo.com>, "Otto Sanchez" <o...@ipexpert.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Date: Thursday, December 31, 2009, 1:18 AM No… default location is SYSTEM…I agree, a little confusing especially since the Admin Guide does not address the commands needed under Telephony Service. Thanks again Otto! Jeff From: anil batra [mailto:anil...@yahoo.com] Sent: Wednesday, December 30, 2009 11:46 AM To: Otto Sanchez; Jeff Cotter Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trying to disable PC Port on CME Awesome !!! Thanks a million,Jeff. A little confusion here...is not " cnf-file location flash:" the default location for phone config files ??? --- On Thu, 12/31/09, Jeff Cotter <jcot...@voxns.com> wrote: From: Jeff Cotter <jcot...@voxns.com> Subject: Re: [OSL | CCIE_Voice] Trying to disable PC Port on CME To: "anil batra" <anil...@yahoo.com>, "Otto Sanchez" <o...@ipexpert.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Date: Thursday, December 31, 2009, 1:12 AM Sure Anil, pertinent configuration below. Key commands were under telephony service…I had to have BOTH cnf-file location flash and cnf-file perphone configured. telephony-service max-ephones 5 max-dn 10 no-reg ip source-address 192.168.1.7 port 2000 caller-id block code *69 cnf-file location flash: cnf-file perphone time-zone 5 voicemail 3099 max-conferences 4 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T after-hours block pattern 1 1900 7-24 create cnf-files version-stamp Jan 01 2002 00:00:00 ! ephone-template 13 service phone pcPort 1 ephone 2 Device Security Mode: Non-Secure mac-address 0023.EB53.2544 type 7965 button 1:2 keepalive 30 auxiliary 30 multicast-moh max-calls-per-button 8 busy-trigger-per-button 0 ephone-template 13 Always send media packets to this router: No Preferred codec: g711ulaw conference drop-mode never conference add-mode all conference admin: No privacy: Yes privacy button: No user-locale US network-locale US From: anil batra [mailto:anil...@yahoo.com] Sent: Wednesday, December 30, 2009 11:35 AM To: Otto Sanchez; Jeff Cotter Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trying to disable PC Port on CME Jeff, so you had to give "cnf-file location flash:" under telephone-service and that fixed it. Could you please post your final telephone-service configs. Appreciate it !!! -Anil --- On Thu, 12/31/09, Jeff Cotter <jcot...@voxns.com> wrote: From: Jeff Cotter <jcot...@voxns.com> Subject: Re: [OSL | CCIE_Voice] Trying to disable PC Port on CME To: "Otto Sanchez" <o...@ipexpert.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Date: Thursday, December 31, 2009, 12:56 AM Thanks Otto, that fixed it. I read that information 3 times on the “cnf-file perphone option will not work unless you change the cnf file location to other place different to system” in the admin guide but still could not seem to understand what it was telling me…..arrrgghhhh. Thanks again makes sense now. Jeff From: Otto Sanchez [mailto:o...@ipexpert.com] Sent: Wednesday, December 30, 2009 10:25 AM To: Jeff Cotter Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Trying to disable PC Port on CME Hi, (default), try cnf-file location flash: in telephony service configuration, After that you should see if the specific phone configuration file was indeed created, Ah, also configure the phone type in the ephone configuration, HTH On Wed, Dec 30, 2009 at 1:03 PM, Jeff Cotter <jcot...@voxns.com> wrote: Can’t seem to get this to work. When I go to the phone settings…Device Settings/Security it shows PC Port Disable No. I issue the cnf-file perphone, create cnf-file and reset the phone… Also reloaded router to no avail! . Configuration below. ephone 2 mac-address 0023.EB53.2544 ephone-template 2 button 1:2 ephone-template 2 service phone pcPort 1 service phone settingsAccess 0 ! telephony-service max-ephones 5 max-dn 10 no-reg ip source-address 192.168.1.7 port 2000 caller-id block code *69 cnf-file perphone time-zone 5 voicemail 3099 max-conferences 4 gain -6 call-forward pattern .T web admin system name admin password cisco dn-webedit time-webedit transfer-system full-consult transfer-pattern .T after-hours block pattern 1 1900 7-24 create cnf-files version-stamp Jan 01 2002 00:00:00 _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Regards, Otto Sanchez CCIE #25592 (Voice) Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com -----Inline Attachment Follows----- _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -----Inline Attachment Follows----- _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -----Inline Attachment Follows----- _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
