Scott,
You have to run IOS 12.4T. So we implemented some fVRF configuration at proctorlabs to make pod to pod transition for students easier. (Which in the future will allow you guys to save and load configurations if we finish working out the logistics of that). With this change though our EZVPN implementation has moved to phase 8 and it seems thru more testing that the workaround below is required on the client end to match with the features we have implemented. If you have a router that can run at least 12.4(15)T then you don't have to change it out. I am using an 831 at home and it works great so you don't have to have the latest and greatest by any means. I would be happy to work with you on this if you would like to setup a time to do testing. Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: <mailto:tsc...@ipexpert.com> tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: <http://www.ipexpert.com/chat> www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at <http://www.ipexpert.com/communities> www.ipexpert.com/communities and our public website at <http://www.ipexpert.com> www.ipexpert.com From: scott carruthers [mailto:scarruthe...@hotmail.com] Sent: Monday, February 08, 2010 11:16 AM To: tsc...@ipexpert.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com Cc: wlaw...@ipexpert.com; dle...@ipexpert.com; vik mahli Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues I did not - I may have missed a note in these regards if one was sent out. Unfortunately I have been limping along (never had issues in V2) with less than recommended IOS due to hardware constraints. If I enter interface virtual-template1 I do not have a type tunnel option in the current IOS. What version is needed for this? May need to break down and finally get to recommended hardware/software versions if this has been known to cure such issues. Thanks Scott _____ From: tsc...@ipexpert.com To: scarruthe...@hotmail.com; 2xcci...@gmail.com; 2xcci...@gmail.com; ccie_voice@onlinestudylist.com CC: wlaw...@ipexpert.com; dle...@ipexpert.com; vma...@ipexpert.com Subject: RE: [OSL | CCIE_Voice] Proctorlabs VPN Issues Date: Mon, 8 Feb 2010 11:00:38 -0500 Did you guys add the following to your configuration? interface Loopback0 ip address 10.10.100.15 255.255.255.255 ! interface Virtual-Template1 type tunnel ip unnumbered Loopback0 ! crypto ipsec client ezvpn IPx-Voice-vRack mode network-plus virtual-interface 1 Regards, Tyson Scott - CCIE #13513 R&S, Security, and SP Technical Instructor - IPexpert, Inc. Mailto: tsc...@ipexpert.com Telephone: +1.810.326.1444, ext. 208 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com From: Wayne Lawson [mailto:wlaw...@ipexpert.com] Sent: Monday, February 08, 2010 8:37 AM To: Drew LePla; Tyson Scott; Vik Malhi Cc: Wayne A. Lawson II Subject: Fwd: [OSL | CCIE_Voice] Proctorlabs VPN Issues Guys - I'd like to get together with all 3 of you. It appears that PLI problems are continuing and we need to get this figured out. Regards, Wayne A. Lawson II - CCIE #5244 Founder & President - IPexpert Mailto: wlaw...@ipexpert.com Telephone: +1.810.326.1444, ext. 101 Live Assistance, Please visit: www.ipexpert.com/chat eFax: +1.810.454.0130 ::Message sent from iPhone:: IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S, Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service Provider) Certification Training with locations throughout the United States, Europe and Australia. Be sure to check out our online communities at www.ipexpert.com/communities and our public website at www.ipexpert.com. Begin forwarded message: From: scott carruthers <scarruthe...@hotmail.com> Date: February 8, 2010 6:52:23 AM EST To: <2xcci...@gmail.com>, <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues Thanks Mike. I will email proctorlabs support and let you know what I get for a response. Has anyone else encountered similiar issues and been able to get resolution? As I said - I thought that proctorlabs/IP Expert were aware of Easy VPN issues but thought the problems were now rectified. From Mike's and my own experience it seems like problems that appears to be phone type centric remain. Thanks Scott _____ Date: Sun, 7 Feb 2010 18:05:47 -0500 Subject: Re: [OSL | CCIE_Voice] Proctorlabs VPN Issues From: 2xcci...@gmail.com To: scarruthe...@hotmail.com; ccie_voice@onlinestudylist.com CC: 2xcci...@gmail.com Hey Scott, Yes, I have been having the same type of problems. The 7960s usually appear to work fine. If I use a 7961 or 7971 for whatever reason they have issues. For instance in some cases I can't call from hq to br1. The phones will ring, but when I pick, there is no audio. Even though there is no audio if you leave the phone off the hook eventually the call drops. In some cases when calling the PSTN the phones will reset when I pickup or try to put on hold the 7961/71s will state that CM is down. Or like you said, you will pick up the PSTN phone and the 7961 phone does not acknowledge that the phone has been picked up. It is a pain. I thought it was just me. When studying on the voice version 2 pods I did not have any issues, but I was not using 7971s or 7961s. Not sure if that makes a difference. Thanks, Mike On Sun, Feb 7, 2010 at 4:32 PM, scott carruthers <scarruthe...@hotmail.com> wrote: I haven't used a Proctorlabs session in a few weeks. In the past I had issues with the V3 easy VPN tunnels when using hardware phones. I believe there were updates sent out stating that many people were experiencing problems with the easy VPN solution but that the problems were not rectified. Are others having continued problems? Issues include: -Several phones in my lab register without issue, show line appearances, will go hook and receive dial tone, can dial PSTN numbers, but the call will not cut thru to two way audio - the phone will continue ringing after I attempt to pick it up on the PSTN phone. -This is not a GW, etc issue - some phones are fine - others are not - indentical configs and calling from same sites. -Not sure if this related to phone model by my lone 7960 is fine but 7970s experience issues. Thanks Scott _____ Hotmail: Powerful Free email with security by Microsoft. Get it now. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _____ Hotmail: Trusted email with powerful SPAM protection. Sign up now. _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com _____ Your E-mail and More On-the-Go. Get Windows Live Hotmail Free. Sign up <http://clk.atdmt.com/GBL/go/201469229/direct/01/> now.
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com