Hi Roger, Berry, Am already did that a few times, adding, removing and re-adding the CUCM-Sub into the cluster inventory, but still got no chance to get it work.
I think i've out of my mind, can't think of any possibilities. Anyone else can help? Thanks Shingei On Mon, Mar 1, 2010 at 9:35 PM, Berry, Matthew J. <[email protected]>wrote: > Good point, Roger. CUCM Pub needs something to validate against. > > - Sent from my Blackberry > > ------------------------------ > *From*: [email protected] < > [email protected]> > *To*: ShinGei Yong <[email protected]>; > [email protected] <[email protected]> > *Sent*: Mon Mar 01 04:27:15 2010 > *Subject*: Re: [OSL | CCIE_Voice] Failure of Adding subscriber-VM Server > 2.0 > > Hi Shingei, > > This maybe a long shot, but anyway, have you added the sub as a UCM server > on the pub before you tried to add it as a 2nd node? > > > > *Roger Källberg* > Unified Communication Consultant > Cygate AB > > > > *From:* ShinGei Yong [mailto:[email protected]] > *Sent:* den 1 mars 2010 03:29 > *To:* [email protected] > *Subject:* [OSL | CCIE_Voice] Failure of Adding subscriber-VM Server 2.0 > > > > Hi All, > > Im currently having the issue of adding the 2nd node to the UCM cluster. > The error message as per attached jpg "Configuration Validation with > CUCM-PUB Failed". > > I've did some research based on the error message, either from CISCO or > some older post. What i've tried out was: > > 1. Adding a NTP server to CUCM-PUB. CUCM-PUB was able to get the time > source from my WINXP modified NTP server, and can be viewed from CUCM CLI. > 2. Changed of Security Password. Based on CISCO explanation, it could be > due to the security password mismatch between CUCM-PUB and SUB. I've reset > the security password and reboot the CUCM-PUB, but still got no luck. I did > tried to input an "incorrect" Security Password while adding the 2nd node, > it did correctly prompt that the password was error. So confirmed that the > security password entered was correct. > 3. Some post mentioned that the MTU for the CUCM, will have some issue if > leave it to default, but i'm not too sure what does it mean? Should i change > it to MTU size to 1492? > > I'm currently using VMWare Server 2.0. > > regards, > Shingei > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
