If all else fails, save your configs and reboot BR2 and HQ routers. And test again.
From: Omotayo [mailto:adefilabi...@gmail.com] Sent: Wednesday, March 10, 2010 5:38 PM To: Berry, Matthew J. Cc: OSL Group Subject: Re: [OSL | CCIE_Voice] calls from hq to and from cme sip phones The trunk DP has a region that speaks g729 to hq and br1 find attached the config On Thu, Mar 11, 2010 at 12:24 AM, Berry, Matthew J. <mjbe...@krollontrack.com<mailto:mjbe...@krollontrack.com>> wrote: Omotayo, How do you have your regions setup in CUCM? The CUCME trunk through the HQ gateway should be placed in the HQ region. Can you also send me the HQ config as an attached file. Make sure your dspfarm has a 'no shutdown" issued. Also, make sure your transcoder is registered to CUCM under Media Resources >> Transcoder. Did you also make sure the transcoder is configured as an IOS Enhanced Media Termination Point? Also, make sure you ALWAYS reset the trunk in CUCM. That will oftentimes clear out weird issues. I have learned that lesson the hard way. Matthew Berry From: ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com> [mailto:ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com>] On Behalf Of Omotayo Sent: Wednesday, March 10, 2010 5:20 PM To: OSL Group Subject: Re: [OSL | CCIE_Voice] calls from hq to and from cme sip phones Hello, the debug shows that the codec getting to the cme is g711 because the codec byte is 160 and still it disconnects On Thu, Mar 11, 2010 at 12:03 AM, Omotayo <adefilabi...@gmail.com<mailto:adefilabi...@gmail.com>> wrote: Hello, When i call from hq sccp phone to cme sip phone, it rings but when i pick up. it disconnects also when i call from cme sip phone to hq (sccp and sip) phone it rings on the hq phones when i pick t disconnects and contnues ringing on the sip phone i have a transcoder configured on the trunk Any one with a fix thanks
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com