yes if not itwont register to the UCM Can the transcoder be configured on the br2 router?? On Thu, Mar 11, 2010 at 12:54 AM, Berry, Matthew J. < mjbe...@krollontrack.com> wrote:
> Have you issued a “no shut’ on dspfarm profile 1 transcode? > > > > *From:* Omotayo [mailto:adefilabi...@gmail.com] > *Sent:* Wednesday, March 10, 2010 5:38 PM > *To:* Berry, Matthew J. > *Cc:* OSL Group > > *Subject:* Re: [OSL | CCIE_Voice] calls from hq to and from cme sip phones > > > > > > The trunk DP has a region that speaks g729 to hq and br1 > > > > find attached the config > > On Thu, Mar 11, 2010 at 12:24 AM, Berry, Matthew J. < > mjbe...@krollontrack.com> wrote: > > Omotayo, > > > > How do you have your regions setup in CUCM? The CUCME trunk through the HQ > gateway should be placed in the HQ region. > > > > Can you also send me the HQ config as an attached file. Make sure your > dspfarm has a ‘no shutdown” issued. Also, make sure your transcoder is > registered to CUCM under Media Resources >> Transcoder. Did you also make > sure the transcoder is configured as an IOS Enhanced Media Termination > Point? > > > > Also, make sure you ALWAYS reset the trunk in CUCM. That will oftentimes > clear out weird issues. I have learned that lesson the hard way. > > > > Matthew Berry > > > > > > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Omotayo > *Sent:* Wednesday, March 10, 2010 5:20 PM > *To:* OSL Group > *Subject:* Re: [OSL | CCIE_Voice] calls from hq to and from cme sip phones > > > > Hello, > > > > the debug shows that the codec getting to the cme is g711 because the codec > byte is 160 and still it disconnects > > > > > > On Thu, Mar 11, 2010 at 12:03 AM, Omotayo <adefilabi...@gmail.com> wrote: > > Hello, > > > > When i call from hq sccp phone to cme sip phone, it rings but when i pick > up. it disconnects > > > > also when i call from cme sip phone to hq (sccp and sip) phone it rings on > the hq phones when i pick t disconnects and contnues ringing on the sip > phone > > > > i have a transcoder configured on the trunk > > > > Any one with a fix > > > > thanks > > > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com