I have the dial-peer on the gateway which matches the external number when i am dialing through MVA .
i am able to dial this external number when i am not in MVA On Mon, Mar 15, 2010 at 2:11 AM, Otto Sanchez <o...@ipexpert.com> wrote: > Hi, > > Did you make sure that you have a dial peer in the hq rtr which destination > number match the mva number you have in the ucm configuration?, this is > needed to route calls outbound calls from the remote devices connected to > the mva service, > > Thanks, > > On Fri, Mar 12, 2010 at 9:25 PM, anupam TYAGI <anuf...@gmail.com> wrote: > >> i have the route pattern partion assigned to the CSS and this CSS is >> assigned to RDP >but still the call disconnect when i dial the external >> number in MVZ >> >> On Fri, Mar 12, 2010 at 11:06 PM, Omotayo <adefilabi...@gmail.com> wrote: >> >>> Hello, >>> >>> Berry is right. >>> >>> create a partition called pt-mva >>> >>> crease a CSS called css-mva >>> >>> put the partition in the css >>> >>> create a route pattern like 9.011! in partition pt-mva. the gateway can >>> be the hq gateway if you wish >>> discard predot >>> >>> assign the css to the remote destination profile >>> >>> this will work for you >>> >>> >>> >>> >>> On Fri, Mar 12, 2010 at 6:22 PM, anupam TYAGI <anuf...@gmail.com>wrote: >>> >>>> if i dial that external number without MVA it goes through ,but when in >>>> MVA i get a disconnect when calling this external number ( so don't seems >>>> to >>>> be codec issue ) >>>> >>>> >>>> On Fri, Mar 12, 2010 at 10:30 PM, Patrick Fischer < >>>> myciscov...@gmail.com> wrote: >>>> >>>>> are you maybe calling to a remote location (g.729) and therefore a >>>>> xcoder is required, but not set up correctly? >>>>> >>>>> 2010/3/12 anupam TYAGI <anuf...@gmail.com> >>>>> >>>>>> i saw the call hit the gateway . RDP is having the same CSS as >>>>>> phone CSS >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Mar 12, 2010 at 9:08 PM, Berry, Matthew J. < >>>>>> mjbe...@krollontrack.com> wrote: >>>>>> >>>>>>> Check the CSS on the remote destination profile you’re calling >>>>>>> from. >>>>>>> >>>>>>> If you do a “debug isdn q931” on the PSTN gateway, do you see the >>>>>>> call hit the gateway? >>>>>>> >>>>>>> >>>>>>> >>>>>>> Your rerouting CSS on the RDP is used for calls out to your RD. >>>>>>> >>>>>>> Your CSS on the RDP is used for calls through MVA that are routed out >>>>>>> through your PSTN gateway. >>>>>>> >>>>>>> >>>>>>> >>>>>>> *From:* ccie_voice-boun...@onlinestudylist.com [mailto: >>>>>>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *anupam TYAGI >>>>>>> *Sent:* Friday, March 12, 2010 9:27 AM >>>>>>> *To:* ccie_voice-requ...@onlinestudylist.com; >>>>>>> ccie_voice@onlinestudylist.com >>>>>>> *Subject:* [OSL | CCIE_Voice] MVA >>>>>>> >>>>>>> >>>>>>> >>>>>>> Hi Folks >>>>>>> >>>>>>> I am doing MVA , When i dial the MVA number , I am able to hear the >>>>>>> prompt. I dial a PSTN number , but the call disconnect . Can any body >>>>>>> suggest me what can be the reason . >>>>>>> >>>>>>> >>>>>>> Rgds >>>>>>> Anu. >>>>>>> >>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> For more information regarding industry leading CCIE Lab training, >>>>>> please visit www.ipexpert.com >>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com >>>> >>>> >>> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> > > > -- > Regards, > > Otto Sanchez > CCIE #25592 (Voice) > Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
