it is configured , i am able to reach MVA prompts , but when i am dialing the external when in MVA my call disconnects
On Mon, Mar 15, 2010 at 8:37 AM, Otto Sanchez <o...@ipexpert.com> wrote: > Hi, > > I'm referring to the mva number you have configured in the ucm->media > resources->mobile voice access config, do you have a voip dial-peer matching > this number as destination and pointing to the ucm? > > > On Sun, Mar 14, 2010 at 10:33 PM, anupam TYAGI <anuf...@gmail.com> wrote: > >> I have the dial-peer on the gateway which matches the external number when >> i am dialing through MVA . >> >> i am able to dial this external number when i am not in MVA >> >> >> On Mon, Mar 15, 2010 at 2:11 AM, Otto Sanchez <o...@ipexpert.com> wrote: >> >>> Hi, >>> >>> Did you make sure that you have a dial peer in the hq rtr which >>> destination number match the mva number you have in the ucm configuration?, >>> this is needed to route calls outbound calls from the remote devices >>> connected to the mva service, >>> >>> Thanks, >>> >>> On Fri, Mar 12, 2010 at 9:25 PM, anupam TYAGI <anuf...@gmail.com>wrote: >>> >>>> i have the route pattern partion assigned to the CSS and this CSS is >>>> assigned to RDP >but still the call disconnect when i dial the external >>>> number in MVZ >>>> >>>> On Fri, Mar 12, 2010 at 11:06 PM, Omotayo <adefilabi...@gmail.com>wrote: >>>> >>>>> Hello, >>>>> >>>>> Berry is right. >>>>> >>>>> create a partition called pt-mva >>>>> >>>>> crease a CSS called css-mva >>>>> >>>>> put the partition in the css >>>>> >>>>> create a route pattern like 9.011! in partition pt-mva. the gateway can >>>>> be the hq gateway if you wish >>>>> discard predot >>>>> >>>>> assign the css to the remote destination profile >>>>> >>>>> this will work for you >>>>> >>>>> >>>>> >>>>> >>>>> On Fri, Mar 12, 2010 at 6:22 PM, anupam TYAGI <anuf...@gmail.com>wrote: >>>>> >>>>>> if i dial that external number without MVA it goes through ,but when >>>>>> in MVA i get a disconnect when calling this external number ( so don't >>>>>> seems >>>>>> to be codec issue ) >>>>>> >>>>>> >>>>>> On Fri, Mar 12, 2010 at 10:30 PM, Patrick Fischer < >>>>>> myciscov...@gmail.com> wrote: >>>>>> >>>>>>> are you maybe calling to a remote location (g.729) and therefore a >>>>>>> xcoder is required, but not set up correctly? >>>>>>> >>>>>>> 2010/3/12 anupam TYAGI <anuf...@gmail.com> >>>>>>> >>>>>>>> i saw the call hit the gateway . RDP is having the same CSS as >>>>>>>> phone CSS >>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> On Fri, Mar 12, 2010 at 9:08 PM, Berry, Matthew J. < >>>>>>>> mjbe...@krollontrack.com> wrote: >>>>>>>> >>>>>>>>> Check the CSS on the remote destination profile you’re calling >>>>>>>>> from. >>>>>>>>> >>>>>>>>> If you do a “debug isdn q931” on the PSTN gateway, do you see the >>>>>>>>> call hit the gateway? >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Your rerouting CSS on the RDP is used for calls out to your RD. >>>>>>>>> >>>>>>>>> Your CSS on the RDP is used for calls through MVA that are routed >>>>>>>>> out through your PSTN gateway. >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> *From:* ccie_voice-boun...@onlinestudylist.com [mailto: >>>>>>>>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *anupam >>>>>>>>> TYAGI >>>>>>>>> *Sent:* Friday, March 12, 2010 9:27 AM >>>>>>>>> *To:* ccie_voice-requ...@onlinestudylist.com; >>>>>>>>> ccie_voice@onlinestudylist.com >>>>>>>>> *Subject:* [OSL | CCIE_Voice] MVA >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> Hi Folks >>>>>>>>> >>>>>>>>> I am doing MVA , When i dial the MVA number , I am able to hear >>>>>>>>> the prompt. I dial a PSTN number , but the call disconnect . Can >>>>>>>>> any body >>>>>>>>> suggest me what can be the reason . >>>>>>>>> >>>>>>>>> >>>>>>>>> Rgds >>>>>>>>> Anu. >>>>>>>>> >>>>>>>> >>>>>>>> >>>>>>>> _______________________________________________ >>>>>>>> For more information regarding industry leading CCIE Lab training, >>>>>>>> please visit www.ipexpert.com >>>>>>>> >>>>>>>> >>>>>>> >>>>>> >>>>>> _______________________________________________ >>>>>> For more information regarding industry leading CCIE Lab training, >>>>>> please visit www.ipexpert.com >>>>>> >>>>>> >>>>> >>>> >>>> _______________________________________________ >>>> For more information regarding industry leading CCIE Lab training, >>>> please visit www.ipexpert.com >>>> >>>> >>> >>> >>> -- >>> Regards, >>> >>> Otto Sanchez >>> CCIE #25592 (Voice) >>> Support Engineer - IPexpert, Inc. >>> URL: http://www.IPexpert.com <http://www.ipexpert.com/> >>> >> >> > > > -- > Regards, > > Otto Sanchez > CCIE #25592 (Voice) > Support Engineer - IPexpert, Inc. > URL: http://www.IPexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com