Would you please post your gw config? thanks,
On Sun, Mar 14, 2010 at 11:13 PM, anupam TYAGI <anuf...@gmail.com> wrote: > it is configured , i am able to reach MVA prompts , but when i am dialing > the external when in MVA my call disconnects > > > On Mon, Mar 15, 2010 at 8:37 AM, Otto Sanchez <o...@ipexpert.com> wrote: > >> Hi, >> >> I'm referring to the mva number you have configured in the ucm->media >> resources->mobile voice access config, do you have a voip dial-peer matching >> this number as destination and pointing to the ucm? >> >> >> On Sun, Mar 14, 2010 at 10:33 PM, anupam TYAGI <anuf...@gmail.com> wrote: >> >>> I have the dial-peer on the gateway which matches the external number >>> when i am dialing through MVA . >>> >>> i am able to dial this external number when i am not in MVA >>> >>> >>> On Mon, Mar 15, 2010 at 2:11 AM, Otto Sanchez <o...@ipexpert.com> wrote: >>> >>>> Hi, >>>> >>>> Did you make sure that you have a dial peer in the hq rtr which >>>> destination number match the mva number you have in the ucm configuration?, >>>> this is needed to route calls outbound calls from the remote devices >>>> connected to the mva service, >>>> >>>> Thanks, >>>> >>>> On Fri, Mar 12, 2010 at 9:25 PM, anupam TYAGI <anuf...@gmail.com>wrote: >>>> >>>>> i have the route pattern partion assigned to the CSS and this CSS is >>>>> assigned to RDP >but still the call disconnect when i dial the external >>>>> number in MVZ >>>>> >>>>> On Fri, Mar 12, 2010 at 11:06 PM, Omotayo <adefilabi...@gmail.com>wrote: >>>>> >>>>>> Hello, >>>>>> >>>>>> Berry is right. >>>>>> >>>>>> create a partition called pt-mva >>>>>> >>>>>> crease a CSS called css-mva >>>>>> >>>>>> put the partition in the css >>>>>> >>>>>> create a route pattern like 9.011! in partition pt-mva. the gateway >>>>>> can be the hq gateway if you wish >>>>>> discard predot >>>>>> >>>>>> assign the css to the remote destination profile >>>>>> >>>>>> this will work for you >>>>>> >>>>>> >>>>>> >>>>>> >>>>>> On Fri, Mar 12, 2010 at 6:22 PM, anupam TYAGI >>>>>> <anuf...@gmail.com>wrote: >>>>>> >>>>>>> if i dial that external number without MVA it goes through ,but when >>>>>>> in MVA i get a disconnect when calling this external number ( so don't >>>>>>> seems >>>>>>> to be codec issue ) >>>>>>> >>>>>>> >>>>>>> On Fri, Mar 12, 2010 at 10:30 PM, Patrick Fischer < >>>>>>> myciscov...@gmail.com> wrote: >>>>>>> >>>>>>>> are you maybe calling to a remote location (g.729) and therefore a >>>>>>>> xcoder is required, but not set up correctly? >>>>>>>> >>>>>>>> 2010/3/12 anupam TYAGI <anuf...@gmail.com> >>>>>>>> >>>>>>>>> i saw the call hit the gateway . RDP is having the same CSS as >>>>>>>>> phone CSS >>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> On Fri, Mar 12, 2010 at 9:08 PM, Berry, Matthew J. < >>>>>>>>> mjbe...@krollontrack.com> wrote: >>>>>>>>> >>>>>>>>>> Check the CSS on the remote destination profile you’re calling >>>>>>>>>> from. >>>>>>>>>> >>>>>>>>>> If you do a “debug isdn q931” on the PSTN gateway, do you see the >>>>>>>>>> call hit the gateway? >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Your rerouting CSS on the RDP is used for calls out to your RD. >>>>>>>>>> >>>>>>>>>> Your CSS on the RDP is used for calls through MVA that are routed >>>>>>>>>> out through your PSTN gateway. >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> *From:* ccie_voice-boun...@onlinestudylist.com [mailto: >>>>>>>>>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *anupam >>>>>>>>>> TYAGI >>>>>>>>>> *Sent:* Friday, March 12, 2010 9:27 AM >>>>>>>>>> *To:* ccie_voice-requ...@onlinestudylist.com; >>>>>>>>>> ccie_voice@onlinestudylist.com >>>>>>>>>> *Subject:* [OSL | CCIE_Voice] MVA >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Hi Folks >>>>>>>>>> >>>>>>>>>> I am doing MVA , When i dial the MVA number , I am able to hear >>>>>>>>>> the prompt. I dial a PSTN number , but the call disconnect . Can >>>>>>>>>> any body >>>>>>>>>> suggest me what can be the reason . >>>>>>>>>> >>>>>>>>>> >>>>>>>>>> Rgds >>>>>>>>>> Anu. >>>>>>>>>> >>>>>>>>> >>>>>>>>> >>>>>>>>> _______________________________________________ >>>>>>>>> For more information regarding industry leading CCIE Lab training, >>>>>>>>> please visit www.ipexpert.com >>>>>>>>> >>>>>>>>> >>>>>>>> >>>>>>> >>>>>>> _______________________________________________ >>>>>>> For more information regarding industry leading CCIE Lab training, >>>>>>> please visit www.ipexpert.com >>>>>>> >>>>>>> >>>>>> >>>>> >>>>> _______________________________________________ >>>>> For more information regarding industry leading CCIE Lab training, >>>>> please visit www.ipexpert.com >>>>> >>>>> >>>> >>>> >>>> -- >>>> Regards, >>>> >>>> Otto Sanchez >>>> CCIE #25592 (Voice) >>>> Support Engineer - IPexpert, Inc. >>>> URL: http://www.IPexpert.com <http://www.ipexpert.com/> >>>> >>> >>> >> >> >> -- >> Regards, >> >> Otto Sanchez >> CCIE #25592 (Voice) >> Support Engineer - IPexpert, Inc. >> URL: http://www.IPexpert.com <http://www.ipexpert.com/> >> > > -- Regards, Otto Sanchez CCIE #25592 (Voice) Support Engineer - IPexpert, Inc. URL: http://www.IPexpert.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
