Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1

[Ashar Siddiqui]

First of all, why are you playing? You should be labbing properly as voice field is not a playground.. Joke aside... ;) What is your "‘show ccm-manager music-on-hold" ? If no MoH streams are shown by this command then CCM has failed to provide the gateway with MoH Also keep in mind Tone on hold means there is a CM misconfiguration. Silence means the RTP is not getting to the router. Your case is CCM configuration issue. Check configuration again properly. Check at Pub CCM > the MOH server - region/Device pool selected properly, reset it and then login to subscriber..go to the same place and reset it from there as well. Also restart Media Voice app. The output you posted means that you have proper telephony-service configuration (max-dn/max-ephone etc)...problem is at cucm side.. You can now continue playing.. Ash> naoufal kerboute wrote: Hi,   I'm playing with multicast moh over the flash of router, the configuration looks good and I can see in the debug the moh traffic, but on the PSTN phone I heard only bips.   below the output of debug ephone moh: Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2 Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 3976 = 496521 Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024 Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2     I've created a region who use g711 with other regions, activated the multicast on the source file and the moh server.     Any Ideas? _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com