There you go! You now know the issue.
Share with us when you resolve it.
Ash>
naoufal kerboute wrote:
Hi Ashar,
I need to play in case to forget
the stress of the lab, it's coming soon.
I think you are right the problem
on the UCM side, I will try to restart the Media voice app and back to
you.
The output of show ccm-manager
music-on-hold
BR1-RTR#show ccm-manager
music-on-hold
Current active multicast sessions : 0
So
ucm didn't provide any multicast to the router.
Regards
First of all, why are you playing? You
should be labbing properly as voice field is not a playground..
Joke aside... ;)
What is your "‘show
ccm-manager music-on-hold" ?
If no MoH
streams are shown by this command then CCM has failed to provide the
gateway with MoH
Also keep in mind Tone on hold means there is a CM
misconfiguration. Silence means the RTP is not getting to the router.
Your case is CCM configuration issue. Check configuration again
properly.
Check at Pub CCM > the MOH server - region/Device pool selected
properly, reset it and then login to subscriber..go to the same place
and reset it from there as well.
Also restart Media Voice app.
The output you posted means that you have proper telephony-service
configuration (max-dn/max-ephone etc)...problem is at cucm side..
You can now continue playing..
Ash>
naoufal kerboute wrote:
Hi,
I'm playing with multicast moh
over the flash of router, the configuration looks good and I can see in
the debug the moh traffic, but on the PSTN phone I heard only bips.
below the output of debug
ephone moh:
Jun 25 18:03:04.729: MoH route
If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via
10.10.110.2
Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at
492545 read 3976 = 496521
Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024
Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP
Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via
10.10.110.2
I've created a region who use
g711 with other regions, activated the multicast on the source file and
the moh server.
Any Ideas?
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
|
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
