Thanks Mark, However I'm not missing this configuration, may be the file is corrupted. Because I did it with the same way in lab1 vol1 on PL vRack, and Now I'm on Vol2Lab2. ________________________________ De : Mark Holloway [...@markholloway.com] Date d'envoi : vendredi 25 juin 2010 18:47 À : naoufal kerboute Cc : ccie_voice@onlinestudylist.com Objet : Re: [OSL | CCIE_Voice] Multicast Moh from Flash of BR1
Amy and Jeff helped me with this the other day. Here is what I was missing (from Jeff's reply) max-ephones 1 max-dn 1 ip source <ip address of voice vlan/loop> Also, under global config add the following command: ccm-manager music-on-hold bind source <ip address configured under ccm-manager-fallback> On Jun 25, 2010, at 12:24 PM, naoufal kerboute wrote: Hi, I'm playing with multicast moh over the flash of router, the configuration looks good and I can see in the debug the moh traffic, but on the PSTN phone I heard only bips. below the output of debug ephone moh: Jun 25 18:03:04.729: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP Jun 25 18:03:04.729: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2 Jun 25 18:03:09.173: ifs_read flash:music-on-hold.au end of file at 492545 read 3976 = 496521 Jun 25 18:03:09.177: moh tail fill from 24 at 0x4A0E9FF8 length 4024 Jun 25 18:03:10.017: MoH route If Vlan240 ETHERNET 10.10.201.1 via ARP Jun 25 18:03:10.017: MoH route If Loopback0 46 10.10.110.2 via 10.10.110.2 I've created a region who use g711 with other regions, activated the multicast on the source file and the moh server. Any Ideas? _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com