Thanks Goerge for the reply.
 
I haven't tried this debug of h225. I tried debug voip dialpeer all .I'll try 
it with tracing of the call manager .
 
That number is for the Contact Center CTI port. Any incoming call will be 
answered by CUCCX  by the Application triggered by that number (888).
 
The setup on the cm7 side , router is configured as H323 gateway.  Is there any 
other information you need to know about?
 
 
Thanks and regards.
 
Khaled
 


Date: Sun, 17 Oct 2010 10:41:41 +0100
Subject: Re: [OSL | CCIE_Voice] E1 doesn't accept more than one incoming call
From: gogli...@gmail.com
To: khaled_sah...@hotmail.com
CC: ccie_voice@onlinestudylist.com

Hi,


Have you done any debugs? The router sends the h225 setup to the CUCM or it 
just denies the call itself? 
deb h225 q931


Then you might need to see the traces of the Call Manager.
What is the 888 on the call manager? is it a hunt group? particular extension? 
Tell us more about setup on CallManager side...


Cheers,


2010/10/17 khaled Saholy <khaled_sah...@hotmail.com>


 
 
Hi All,
 
I have a weird problem. I configured the router voice controller E1 as one 
pri-group with H.323 the signaling protocol. The router accepts the incoming 
calls and forward them to CCM7. 
The problem is the router only accept one incoming call and it can process more 
than one outgoing call. Any other incoming call , the PSTN answers the call 
saying the number is busy at the moment.
 
Any ideas??   
 
I'm thinking of dividing the pri-group to two groups. 
 
Thanks in advance for any help.
 
 
Here is my config:
 
interface Serial0/2/0:15
 no ip address
 encapsulation hdlc
 isdn switch-type primary-net5
 isdn incoming-voice voice
 isdn send-alerting
 isdn bchan-number-order ascending
 isdn sending-complete
!
voice-port 0/2/0:15
 cptone GB
 connection plar 0
 bearer-cap Speech
 
 
num-exp 0 888  ----> to the contact center
!
dial-peer voice 1 pots
 destination-pattern .T
 incoming called-number .
 direct-inward-dial     -------> the customer dosn't have this service at the 
moment
 port 0/2/0:15
!
dial-peer voice 12 voip
 destination-pattern ...
 voice-class h323 1
 session target ipv4:192.168.77.105
 dtmf-relay h245-alphanumeric
 codec g711alaw
 
 

_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com


                                          
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to