Thank you very much for your help. I was in a vRack session today, I could no longer duplicate the problem with same settings.
I will try to run a trace if I run into the same problem again. On Wed, Dec 8, 2010 at 6:39 AM, Miron Kobelski <findko...@gmail.com> wrote: > Hi, > > if it works fine in SRST it would suggest that the CUCM rejects the call. > I'd configure both d-p to CUCM with voice class codec allowing both g711 > and g729 (as suggested earlier, maybe region settings prevent the call from > being set up - make sure the IP phones in BR1 and the GW itself are in the > same region and the intraregion codec is 711). > > Else, check the SDI trace to see why CUCM rejects the call. > > regards > kobel > > > On Wed, Dec 8, 2010 at 14:44, study2b ccie <study4ccievo...@gmail.com>wrote: > >> Thank you guys for the support, I have tried all the suggestions but it >> did not work. >> >> I will try again tomorrow to see if the same problem still exists >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com