Try creating ad-hoc dn like this instead of 2222 ephone-dn XX octo number A000 conference ad-hoc See if it works. "Not working" what exactly is happening. When you press shared button on idle phone what happens ? Do you see CBarge softkey after pressing the button ? If you see CBarge .. after selecting what happening. ( if you see cannot conference means conf is not configured on router ) Thanks Shrini
_____ From: ccie_voice-boun...@onlinestudylist.com [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Mritunjay Kumar Sent: Monday, January 17, 2011 2:35 AM To: Randall Saborio Cc: ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] Barge is not working in SRST Hi All, thanks for reply and sorry for delayed response. set the max-ephone to 2 and phone type is set but still not working :( 1111 is octo number shared by two phone which is used for Cbarge 2222 is adhoc conference number. Is there any bug or workaround. same config was working earlier! Regards, Mritunjay On Sun, Jan 16, 2011 at 8:55 PM, Randall Saborio <ill2...@gmail.com> wrote: This problem has come up quite a few times on this mailing list. You can go to the archives and do a search and you should find the solution: http://onlinestudylist.com/archives/ccie_voice/ On Sun, Jan 16, 2011 at 6:26 AM, Mritunjay Kumar <mjs...@gmail.com> wrote: Hi All , Cbarge in SRST is not working here is the config telephony-service sdspfarm units 2 sdspfarm tag 1 BR1-CNF no privacy conference hardware srst mode auto-provision none srst dn line-mode dual max-ephones 20 max-dn 20 ip source-address 14.160.116.40 port 2000 max-conferences 12 gain -6 transfer-system full-consult create cnf-files version-stamp Jan 01 2002 00:00:00 BR1# ephone-template 1 softkeys remote-in-use CBarge ephone-dn 1 octo-line number 1111 no-reg primary ephone-dn 2 octo-line number 2222 conference ad-hoc ephone-dn 3 dual-line number 3001 no-reg primary preference 5 ephone-dn 4 dual-line number 3002 no-reg primary preference 5 ephone 1 privacy off device-security-mode none mac-address 0026.CBBE.E8C9 ephone-template 1 button 1:3 2:1 ephone 2 privacy off device-security-mode none mac-address 0026.CBBE.EC4F ephone-template 1 button 1:4 2:1 hardware conf is registered . privacy is disabled under telephony service and in ephone. CME version 7.1 any missing config here ? Please suggest. Regards, Mritunjay _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com -- Randall "da ill" Saborio CCIE Voice Wannabe #10054675811
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
