Hi Mrintunjay,
Here is the working config. Took an hour to figure it out :-)
There is a bug associated with CME 12.4T /CSCti11843/
telephony-service
sdspfarm units 2
sdspfarm tag 1 BR1-CNF
no privacy
conference hardware
srst mode auto-provision none
srst ephone template 1
srst dn line-mode dual-octo
max-ephones 2
max-dn 10
ip source-address 14.160.116.40 port 2000
system message Your current option
time-zone 5
time-format 24
max-conferences 12 gain -6
transfer-system full-consult
create cnf-files version-stamp 7960 Jan 18 2011 07:20:56
!
!
ephone-template 1
softkeys remote-in-use CBarge Newcall
!
ephone-dn 1 dual-line
number 3001 no-reg primary
preference 5
!
ephone-dn 2 dual-line
number 3002 no-reg primary
preference 6
!
ephone-dn 3 octo-line
number A000
conference ad-hoc
preference 1
!
ephone 1
privacy off
!
ephone 2
privacy off
On 1/18/2011 2:19 AM, Mritunjay Kumar wrote:
Hi Shrini,
http://onlinestudylist.com/archives/ccie_voice/2010-November/071295.html
"privacy off" under ephone-template does not work as this is a bug.
it is tested and discussed at
http://onlinestudylist.com/archives/ccie_voice/2010-November/071295.html
but i tried with ephone template but did not work either :(
attaching sh runn .
Regards,
Mritunjay
On Tue, Jan 18, 2011 at 2:16 PM, Miron Kobelski <findko...@gmail.com
<mailto:findko...@gmail.com>> wrote:
Hi,
I suggest to follow Randall's suggestion, as this has already been
discussed many times...
regards
kobel
On Mon, Jan 17, 2011 at 11:35, Mritunjay Kumar <mjs...@gmail.com
<mailto:mjs...@gmail.com>> wrote:
Hi All,
thanks for reply and sorry for delayed response.
set the max-ephone to 2 and phone type is set but still not
working :(
1111 is octo number shared by two phone which is used for Cbarge
2222 is adhoc conference number.
Is there any bug or workaround. same config was working earlier!
Regards,
Mritunjay
On Sun, Jan 16, 2011 at 8:55 PM, Randall Saborio
<ill2...@gmail.com <mailto:ill2...@gmail.com>> wrote:
This problem has come up quite a few times on this mailing
list.
You can go to the archives and do a search and you should
find the solution:
http://onlinestudylist.com/archives/ccie_voice/
On Sun, Jan 16, 2011 at 6:26 AM, Mritunjay Kumar
<mjs...@gmail.com <mailto:mjs...@gmail.com>> wrote:
Hi All ,
Cbarge in SRST is not working
here is the config
telephony-service
sdspfarm units 2
sdspfarm tag 1 BR1-CNF
no privacy
conference hardware
srst mode auto-provision none
srst dn line-mode dual
max-ephones 20
max-dn 20
ip source-address 14.160.116.40 port 2000
max-conferences 12 gain -6
transfer-system full-consult
create cnf-files version-stamp Jan 01 2002 00:00:00
BR1#
ephone-template 1
softkeys remote-in-use CBarge
ephone-dn 1 octo-line
number 1111 no-reg primary
ephone-dn 2 octo-line
number 2222
conference ad-hoc
ephone-dn 3 dual-line
number 3001 no-reg primary
preference 5
ephone-dn 4 dual-line
number 3002 no-reg primary
preference 5
ephone 1
privacy off
device-security-mode none
mac-address 0026.CBBE.E8C9
ephone-template 1
button 1:3 2:1
ephone 2
privacy off
device-security-mode none
mac-address 0026.CBBE.EC4F
ephone-template 1
button 1:4 2:1
hardware conf is registered .
privacy is disabled under telephony service and in
ephone. CME version 7.1
any missing config here ?
Please suggest.
Regards,
Mritunjay
_______________________________________________
For more information regarding industry leading CCIE
Lab training, please visit www.ipexpert.com
<http://www.ipexpert.com>
--
Randall "da ill" Saborio
CCIE Voice Wannabe #10054675811
_______________________________________________
For more information regarding industry leading CCIE Lab
training, please visit www.ipexpert.com <http://www.ipexpert.com>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
