Hi Shrini, created the mentioned ephone-dn ..did not help.
Phones are registered to SRST and able to make a call. when there is active call on shared line , other user press the shared line , Bbarge soft key does not appear and dial tones appears to make a new call that indicates that privacy is on but privacy in disabled in ephone and in telephony service. i did the same config on CME and it is working fine. regards, Mritunjay On Tue, Jan 18, 2011 at 11:52 AM, Shrini <linuxbos...@gmail.com> wrote: > Try creating ad-hoc dn like this instead of 2222 > > ephone-dn XX octo > number A000 > conference ad-hoc > > See if it works. > > "Not working" what exactly is happening. > > When you press shared button on idle phone what happens ? > Do you see CBarge softkey after pressing the button ? > If you see CBarge .. after selecting what happening. ( if you see cannot > conference means conf is not configured on router ) > > Thanks > Shrini > > ------------------------------ > *From:* ccie_voice-boun...@onlinestudylist.com [mailto: > ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Mritunjay Kumar > *Sent:* Monday, January 17, 2011 2:35 AM > *To:* Randall Saborio > > *Cc:* ccie_voice@onlinestudylist.com > *Subject:* Re: [OSL | CCIE_Voice] Barge is not working in SRST > > Hi All, > > thanks for reply and sorry for delayed response. > > set the max-ephone to 2 and phone type is set but still not working :( > > 1111 is octo number shared by two phone which is used for Cbarge > 2222 is adhoc conference number. > > Is there any bug or workaround. same config was working earlier! > > Regards, > Mritunjay > > On Sun, Jan 16, 2011 at 8:55 PM, Randall Saborio <ill2...@gmail.com>wrote: > >> This problem has come up quite a few times on this mailing list. >> You can go to the archives and do a search and you should find the >> solution: >> http://onlinestudylist.com/archives/ccie_voice/ >> >> >> >> On Sun, Jan 16, 2011 at 6:26 AM, Mritunjay Kumar <mjs...@gmail.com>wrote: >> >>> Hi All , >>> >>> Cbarge in SRST is not working >>> >>> here is the config >>> >>> telephony-service >>> sdspfarm units 2 >>> sdspfarm tag 1 BR1-CNF >>> no privacy >>> conference hardware >>> srst mode auto-provision none >>> srst dn line-mode dual >>> max-ephones 20 >>> max-dn 20 >>> ip source-address 14.160.116.40 port 2000 >>> max-conferences 12 gain -6 >>> transfer-system full-consult >>> create cnf-files version-stamp Jan 01 2002 00:00:00 >>> BR1# >>> >>> ephone-template 1 >>> softkeys remote-in-use CBarge >>> ephone-dn 1 octo-line >>> number 1111 no-reg primary >>> ephone-dn 2 octo-line >>> number 2222 >>> conference ad-hoc >>> ephone-dn 3 dual-line >>> number 3001 no-reg primary >>> preference 5 >>> ephone-dn 4 dual-line >>> number 3002 no-reg primary >>> preference 5 >>> >>> ephone 1 >>> privacy off >>> device-security-mode none >>> mac-address 0026.CBBE.E8C9 >>> ephone-template 1 >>> button 1:3 2:1 >>> >>> ephone 2 >>> privacy off >>> device-security-mode none >>> mac-address 0026.CBBE.EC4F >>> ephone-template 1 >>> button 1:4 2:1 >>> >>> hardware conf is registered . >>> >>> privacy is disabled under telephony service and in ephone. CME version >>> 7.1 >>> >>> any missing config here ? >>> >>> Please suggest. >>> >>> >>> Regards, >>> Mritunjay >>> >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> >> >> >> -- >> Randall "da ill" Saborio >> CCIE Voice Wannabe #10054675811 >> >> >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
