No QoS whatsoever between the sites. Just the default frame relay config.
Justin From: Shrini [mailto:[email protected]] Sent: Monday, January 24, 2011 9:22 AM To: Justin Brady Cc: ccieid1ot; [email protected] Subject: Re: [OSL | CCIE_Voice] CallManager and CUE - Ports not registering Hi Justin, Did you run autoqos between HQ and Br1 ? Thanks Shrini On 1/24/2011 4:30 AM, Justin Brady wrote: Yes, IP communication is good. When I setup CUE it let me import users and everything. It "tells" me that the JTAPI login is successful but nothing ever registers. Justin From: ccieid1ot [mailto:[email protected]] Sent: Sunday, January 23, 2011 11:46 PM To: Justin Brady Cc: [email protected]<mailto:[email protected]> Subject: Re: [OSL | CCIE_Voice] CallManager and CUE - Ports not registering Can your cue ping ccm and vice versa? duy ccie #27737 voice tmobile g2 On Jan 23, 2011 4:06 PM, "Justin Brady" <[email protected]<mailto:[email protected]>> wrote: > All, > > I've tried to integrate CUE with CM on 2 different pods now and I'm getting > the same problem The Jtapi ports just aren't registering. Below is the CUE > config and some output. My CUE works beautifully when in SRST mode > (call-manager-fallback and CMEasSRST). MWI does too. > > For my callmanager piece, I am 100% certain the username/password of the > application user matches up between the CM and CUE. It has the CTI ports and > CTI Route Point associated with the user and it's in the Standard CTI enabled > group > I have tried all combination of things on the cti route point and ports. I > started with just extensions in the <none> partition all the way up to > filling out partitions, DP's, CSS's, etc etc and nothing works. > I have followed the Cisco doc and the IPExpert proctor guides on several > different labs to a T and it still won't work. > > FYI, I am ONLY registering it to the Subscriber because I am using EZVPN and > I want my BR2 site to only register with the Sub so I can stop the CM service > and test SRST. However, on my previous attempt, I had both the Pub and Sub in > there with the same problem. > > Other things I have tried after scouring the web and OSL's archives: > > n Removing the ccn configs manually, re-adding them and reloading > > n Reloading at least 5 times for other various reasons > > n Changing the app user ID from cue to cuejtapi > > n Changing the password from cisco to 12345 on the account > > n Clicked on verify on the CUE GUI and got successful on web and jtapi login > > What on earth am I missing (or am I running into some kind of bug)? I have > had this work before, but not the last 2 times I've tried. > > CUE# show ccn subsystem jtapi > Cisco Call Manager: 10.10.210.11 > CCM JTAPI Username: cuejtapi > CCM JTAPI Password: ***** <--This is cisco > Call Control Group 1 CTI ports: 3601,3602 > Call Control Group 1 MWI port: > CSS for redirects from route points: ccm-default > CSS for redirects from CTI ports: redirecting-party > > CUE# show ccn status ccm-manager > > JTAPI Subsystem is not registered with any Call Manager > > > > CONFIGURATION > I've removed what I think are the irrelevant parts of the configs so if you > see something missing, please point it out. > hostname CUE > > ip domain-name cue.com<http://cue.com> > > username sitecphone3 create > username sitecphone2 create > username sitecphone1 create > username admin create > > username sitecphone3 phonenumber "3003" > username sitecphone2 phonenumber "3002" > username sitecphone1 phonenumber "3001" > > ccn application ciscomwiapplication aa > description "ciscomwiapplication" > enabled > maxsessions 6 > script "setmwi.aef" > parameter "CallControlGroupID" "0" > parameter "strMWI_OFF_DN" "8001" > parameter "strMWI_ON_DN" "8000" > end application > > ccn application msgnotification aa > description "msgnotification" > enabled > maxsessions 6 > script "msgnotify.aef" > parameter "logoutUri" "http://localhost/voicemail/vxmlscripts/mbxLogout.jsp"; > parameter "DelayBeforeSendDTMF" "1" > end application > > ccn application voicemail aa > description "voicemail" > enabled > maxsessions 6 > script "voicebrowser.aef" > parameter "logoutUri" "http://localhost/voicemail/vxmlscripts/mbxLogout.jsp"; > parameter "uri" "http://localhost/voicemail/vxmlscripts/login.vxml"; > end application > > ccn engine > end engine > > ccn subsystem jtapi > ctiport 3601 3602 > ccm-manager address 10.10.210.11 > ccm-manager credentials hidden > "kqp8kECeSyAj1Zqu00cTvQ4E0vzCD5YHSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmPSd8ZZNgd+Y9J3xlk2B35j0nfGWTYHfmP" > end subsystem > > ccn subsystem sip > gateway address "10.10.202.1" > mwi sip unsolicited > end subsystem > > ccn trigger http urlname msgnotifytrg > application "msgnotification" > enabled > maxsessions 2 > end trigger > > ccn trigger http urlname mwiapp > application "ciscomwiapplication" > enabled > maxsessions 1 > end trigger > > ccn trigger jtapi phonenumber 3600 > application "voicemail" > enabled > maxsessions 6 > end trigger > > ccn trigger sip phonenumber 3600 > application "voicemail" > enabled > maxsessions 6 > end trigger > > voicemail broadcast recording time 300 > voicemail default messagesize 240 > voicemail notification restriction msg-notification > voicemail operator telephone 3001 > voicemail mailbox owner "sitecphone1" size 2964 > end mailbox > voicemail mailbox owner "sitecphone2" size 2964 > end mailbox > voicemail mailbox owner "sitecphone3" size 2964 > end mailbox > end > > Justin _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
