That I didn't try yet. Justin
From: [email protected] [mailto:[email protected]] On Behalf Of Adam Thompson Sent: Monday, January 24, 2011 4:48 PM To: [email protected] Subject: Re: [OSL | CCIE_Voice] CallManager and CUE - Ports not registering Have you tried restarting the CTI Manager and/or Call Manager services on the CUCM servers? I ran into this same problem during one of my lab sessions, and restarting the services resolved the issue. HTH -Adam On Mon, Jan 24, 2011 at 2:06 PM, Justin Brady <[email protected]<mailto:[email protected]>> wrote: I reloaded the whole thing 5 times. I didn't reload the router, just the CUE. Justin From: [email protected]<mailto:[email protected]> [mailto:[email protected]<mailto:[email protected]>] On Behalf Of Roberto Reyes Alanis Sent: Monday, January 24, 2011 12:27 PM To: [email protected]<mailto:[email protected]> Cc: [email protected]<mailto:[email protected]> Subject: Re: [OSL | CCIE_Voice] CallManager and CUE - Ports not registering When you finish the CUE integration from GUI, the CUE's CTI need the last reset to function properly. Did you restart de CUE? ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------- > I've tried to integrate CUE with CM on 2 different pods now and I'm getting > the same problem The Jtapi ports just aren't registering. Below is the CUE > config and some output. My CUE works beautifully when in SRST mode > (call-manager-fallback and CMEasSRST). MWI does too. > > For my callmanager piece, I am 100% certain the username/password of > the application user matches up between the CM and CUE. It has the CTI ports > and CTI Route Point associated with the user and it's in the Standard CTI > enabled group I have tried all combination of things on the cti route point > and ports. I started with just extensions in the <none> partition all the way > up to filling out partitions, DP's, CSS's, etc etc and nothing works. > I have followed the Cisco doc and the IPExpert proctor guides on several > different labs to a T and it still won't work. Greetings... _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com<http://www.ipexpert.com>
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
