Rahul, Where would the voice class be applied to MOH? Dial-peers has no relevance to MOH.
On Wed, Mar 2, 2011 at 1:22 PM, Rahul Kapor <rahul.kapo...@gmail.com> wrote: > Hi Roger , > > > > If Voice class is not configured then MOH will negotiate codec g729 and > then it that case port should be incremented by 4 . in this case , MOH will > be heard by PSTN phone , not by BR1 phone . becos still Br1 phone will try > listen the MOH on base port. so voice class is mandatory. > > what u think ? > > thx, > Rahul > > > On Wed, Mar 2, 2011 at 7:56 PM, Rogers Ochieng <rogersochi...@gmail.com>wrote: > >> If you are sourcing MOH from Flash for a CUCM Branch phone then the >> multicast MOH server in CUCM will be in a region whose codec you have >> specified to be used intra and intraregion , this will affect the port or IP >> you use on the IOS router (increment on IP or port). So if you put it in a >> G711 only region then you can use the IP you specify and port since G711 is >> the first priority. I don't see where voice class codec comes in since >> multicast moh can't be transcoded. Don't forget max-dn and max-ephones >> >> >> On 2 March 2011 16:46, Rahul Kapor <rahul.kapo...@gmail.com> wrote: >> >>> Hello Rogers / Wi , >>> >>> thanks for help. >>> On top of this i have another question. >>> >>> Req is MOH should be played from flash >>> >>> gateway is H323 >>> >>> My config is >>> >>> dial-peer voice 3000 voip >>> destination-pattern 3... >>> voice-class codec 2 >>> session target ipv4:14.160.110.21 >>> incoming called-number . >>> >>> call-manager-fallback >>> max-conferences 12 gain -6 >>> transfer-system full-consult >>> ip source-address 14.160.116.40 port 2000 >>> moh music-on-hold.au >>> multicast moh 239.1.1.1 port 16384 route 1.1.1.1 >>> >>> voice class codec 2 >>> codec preference 1 g729br8 >>> codec preference 2 g729r8 >>> codec preference 3 g711alaw >>> codec preference 4 g711ulaw >>> >>> since MOH from flash only supports g711ulaw , voice class is mandatory. >>> >>> above config works perfectly. Is this correct approach. I want to make >>> sure that above config should not break the codec requirement. >>> >>> in this case when br1 phone make a PSTN call , codec g711 will be >>> negotiated as gateway and phone are in same region and voice class codec is >>> configured with g711 >>> >>> i would like to have your feedback. >>> >>> thx, >>> Rahul >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> >>> On Wed, Mar 2, 2011 at 9:11 AM, Rogers Ochieng >>> <rogersochi...@gmail.com>wrote: >>> >>>> When there is a requirement for HQ Phones calls to BR1 area code numbers >>>> or redundancy through BR1 Gateway >>>> >>>> On 1 March 2011 22:25, Rahul Kapor <rahul.kapo...@gmail.com> wrote: >>>> >>>>> Hi all , >>>>> >>>>> >>>>> >>>>> For following question >>>>> >>>>> >>>>> >>>>> For IP Phones and gateways , all calls within same site >>>>> >>>>> should use G711 codec. Also, all calls between the sites to remote IP >>>>> phones and >>>>> >>>>> gateways should use G729 codec. >>>>> >>>>> >>>>> >>>>> My answer would be >>>>> >>>>> >>>>> >>>>> Hq region --à HR >>>>> >>>>> >>>>> >>>>> Br1 region --à BR >>>>> >>>>> >>>>> >>>>> Put the br1 gateway and Br1 phone in BR through device pool >>>>> >>>>> HQ gateway and Hq phones in HR through device pool >>>>> >>>>> >>>>> >>>>> System parameter >>>>> >>>>> >>>>> >>>>> G722 Codec Enabled [image: Required Field] disabled >>>>> >>>>> >>>>> >>>>> Intraregion Audio Codec Default g711/g722 >>>>> >>>>> >>>>> >>>>> Interregion Audio Codec Default g729 >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> My doubt is , when IP phone is taking to IP phone (Hq<>Br), gateway is >>>>> not coming in the picture. How can region setting here for gateway matters >>>>> ?? >>>>> >>>>> >>>>> >>>>> Please suggest. >>>>> >>>>> >>>>> >>>>> Thx, >>>>> >>>>> Rahul >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> ! >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> >>>>> _______________________________________________ >>>>> For more information regarding industry leading CCIE Lab training, >>>>> please visit www.ipexpert.com >>>>> >>>>> >>>> >>> >> > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > -- duy CCIE #27737 Voice
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
