There were three MWI delivery options for CUE - "Outcalling", "SIP Subscribe
Notify" and "SIP Unsolicited Notify".  I wanted to test "Outcalling" with
CUE 7.0.6 and CME 7.1.

Per http://ciscovoiceguru.com/518/cue-mwi-notification-methods/,
"Outcalling" need the following config.  But when I left a message, CUE will
call the destination phone with two rings but didn't light up the lamp.  I
was expecting no ring and lamp light up.

I followed the "MWI Troubleshooting" doc on Cisco but couldn't find any
thing significant.  Can anyone help?  Thanks!

CME:
dial-peer voice 3600 voip
destination-pattern 3600
session protocol sipv2
session target ipv4:10.10.202.2
incoming called-number 399[89]….
dtmf-relay sip-notify
codec g711ulaw
no vad
!
ephone-dn  11
number 3998…. no-reg primary
mwi off
!
ephone-dn  12
number 3999…. no-reg primary
mwi on

CUE:
ccn application ciscomwiapplication aa
parameter "strMWI_OFF_DN" "3998"
parameter "strMWI_ON_DN" "3999"
end application
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to