Hi Michael ,

following config should be done  before initializing the CUE

ephone-dn  11
number 3998…. no-reg primary
mwi off
!
ephone-dn  12
number 3999…. no-reg primary
mwi on

just try and let us know the test result.

Regards,
Mritunjay


On Tue, Mar 22, 2011 at 1:09 AM, Michael Luo <[email protected]> wrote:

> There were three MWI delivery options for CUE - "Outcalling", "SIP
> Subscribe Notify" and "SIP Unsolicited Notify".  I wanted to test
> "Outcalling" with CUE 7.0.6 and CME 7.1.
>
> Per http://ciscovoiceguru.com/518/cue-mwi-notification-methods/,
> "Outcalling" need the following config.  But when I left a message, CUE will
> call the destination phone with two rings but didn't light up the lamp.  I
> was expecting no ring and lamp light up.
>
> I followed the "MWI Troubleshooting" doc on Cisco but couldn't find any
> thing significant.  Can anyone help?  Thanks!
>
> CME:
> dial-peer voice 3600 voip
> destination-pattern 3600
> session protocol sipv2
> session target ipv4:10.10.202.2
> incoming called-number 399[89]….
> dtmf-relay sip-notify
> codec g711ulaw
> no vad
> !
> ephone-dn  11
> number 3998…. no-reg primary
> mwi off
> !
> ephone-dn  12
> number 3999…. no-reg primary
> mwi on
>
> CUE:
> ccn application ciscomwiapplication aa
> parameter "strMWI_OFF_DN" "3998"
> parameter "strMWI_ON_DN" "3999"
> end application
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Reply via email to