Never mind. It's translation rules. On Mon, Mar 21, 2011 at 2:39 PM, Michael Luo <[email protected]> wrote:
> There were three MWI delivery options for CUE - "Outcalling", "SIP > Subscribe Notify" and "SIP Unsolicited Notify". I wanted to test > "Outcalling" with CUE 7.0.6 and CME 7.1. > > Per http://ciscovoiceguru.com/518/cue-mwi-notification-methods/, > "Outcalling" need the following config. But when I left a message, CUE will > call the destination phone with two rings but didn't light up the lamp. I > was expecting no ring and lamp light up. > > I followed the "MWI Troubleshooting" doc on Cisco but couldn't find any > thing significant. Can anyone help? Thanks! > > CME: > dial-peer voice 3600 voip > destination-pattern 3600 > session protocol sipv2 > session target ipv4:10.10.202.2 > incoming called-number 399[89]…. > dtmf-relay sip-notify > codec g711ulaw > no vad > ! > ephone-dn 11 > number 3998…. no-reg primary > mwi off > ! > ephone-dn 12 > number 3999…. no-reg primary > mwi on > > CUE: > ccn application ciscomwiapplication aa > parameter "strMWI_OFF_DN" "3998" > parameter "strMWI_ON_DN" "3999" > end application > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com
