CME 7 Admin Guide Talks abiut such restriction and mentions prebuilding configuration to provide service similar to that during normal operation, on page 1234
On 10 April 2011 15:28, Stern, Larry <larry.st...@nuvt.com> wrote: > > I have ran into the same thing, see the note below from one of my > colleagues, I believe it is fixed with firmware 9.1.x, but I cannot > access the Cisco bug tool at the moment. I am not sure about your first > issue with Calling name in SRST mode. But the phones not coming back up > is what I am addressing. > > > FYI, If you have any phones that are running SCCP v8.4.x ( was > distributed with UCM 7.1.x ) they will most likely have issues > registering with SRST, they either do not register at all or will > register the ephone but not any DNs. > > > Larry Stern > Senior Systems Engineer > Black Box Network Services > Long Island Voice/Data > 6000 New Horizons Blvd. > Amittyville, NY, 11701 > Direct: +1631.841.5225 > www.blackbox.com > > > -----Original Message----- > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of > ccie_voice-requ...@onlinestudylist.com > Sent: Sunday, April 10, 2011 7:28 AM > To: ccie_voice@onlinestudylist.com > Subject: CCIE_Voice Digest, Vol 62, Issue 54 > > Send CCIE_Voice mailing list submissions to > ccie_voice@onlinestudylist.com > > To subscribe or unsubscribe via the World Wide Web, visit > http://onlinestudylist.com/mailman/listinfo/ccie_voice > or, via email, send a message with subject or body 'help' to > ccie_voice-requ...@onlinestudylist.com > > You can reach the person managing the list at > ccie_voice-ow...@onlinestudylist.com > > When replying, please edit your Subject line so it is more specific > than "Re: Contents of CCIE_Voice digest..." > > > Today's Topics: > > 1. Re: CME SRST: calling name configuration (adam compton) > 2. Changing Network Settings on SIP Firmware 7961 (Mann Chaddha) > 3. Re: Gatekeeper + CUBE (WB2 Lab1 4.2) (Naoufal Kerboute) > 4. vRack Vouchers for Sale! (must ccie) > 5. time-zone in telephony-serv (Shrini) > 6. vRack Vouchers for Sale (Duncan Hamilton-Walker) > 7. UCCX Script (Redirect call based on the calling number) > (Naoufal Kerboute) > > > ---------------------------------------------------------------------- > > Message: 1 > Date: Sat, 9 Apr 2011 23:41:40 -0400 > From: adam compton <com...@gmail.com> > To: Miron Kobelski <findko...@gmail.com> > Cc: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] CME SRST: calling name configuration > Message-ID: <BANLkTi=on9m68hqixawb+3v2jgrgavb...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I've had the same problem. I never knew what to think of it. I assumed > that's just how it works. > > On Sat, Apr 9, 2011 at 2:57 PM, Miron Kobelski <findko...@gmail.com> > wrote: > > > Hello, > > > > I was playing with CME SRST today and I encountered the same issue > again. I > > configured CME SRST with srst mode auto-provision all. > > Phones reregistered to SRST correctly, ephone and ephone-dn > configuration > > appeared in the config. By default, each ephone-dn is configured with > CUCM > > external phone mask as a calling name. Is it possible to change > ephone's > > calling name to something other in CME SRST? > > > > When I changed the name under ephone-dn and restarted the phone. It > > reregistered, but DN didn't appear on the button (couldn't make any > calls). > > Is it normal/expected behaviour or I missed something? > > > > > > best regards > > kobel > > > > _______________________________________________ > > For more information regarding industry leading CCIE Lab training, > please > > visit www.ipexpert.com > > > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20110409/a4678fac/attachment-0001.html > > > > ------------------------------ > > Message: 2 > Date: Sun, 10 Apr 2011 10:43:46 +0530 > From: Mann Chaddha <mann.chad...@gmail.com> > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Changing Network Settings on SIP Firmware > 7961 > Message-ID: <BANLkTin+sWfthwoDrun2w0d8Uh=dywj...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > Hi All > > I am running Lab 9 & am facing this issue. My home phone 7961 has a SIP > firmware on it & is trying to register to the Br1-CME (Voice Register > Global). I need to edit the TFTP Server settings on the phone but itas > prompting for a username & password. > > What are the defaults for these? > > Thanks > Mann > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20110410/d926b5bd/attachment-0001.html > > > > ------------------------------ > > Message: 3 > Date: Sat, 9 Apr 2011 18:19:39 +0000 > From: Naoufal Kerboute <naou...@mhdinfotech.com> > To: Alex Goh <ncsalex....@gmail.com>, "ccie_voice@onlinestudylist.com" > <ccie_voice@onlinestudylist.com> > Subject: Re: [OSL | CCIE_Voice] Gatekeeper + CUBE (WB2 Lab1 4.2) > Message-ID: > > <a1e0b7fadebf714f9a15622f35b1234f53869...@mhditmbx.mhdinfotech.com> > Content-Type: text/plain; charset="us-ascii" > > Hi, > > You have to register the br2 with the UCME zone not the VIA zone. > > Remove h323-gateway voip id VIA ipaddr 172.1.254.1 1719 > > and replace it with > > h323-gateway voip id UCME ipaddr 172.1.254.1 1719 > > Thanks > Naoufal > > -----Original Message----- > From: ccie_voice-boun...@onlinestudylist.com > [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Alex Goh > Sent: Saturday, April 09, 2011 9:43 PM > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] Gatekeeper + CUBE (WB2 Lab1 4.2) > > Hi Guys, > > I'm trying to get the solutions for question 4.2 to work, but apparently > I'm missing something and hope someone can help. > I've search thru the list but doesn't really found a solution work for > my case. > > The issue I've encounter are when HQ phone 5001 calling BR2 phone 3003, > 3003 ring, but when i tried to answered, the call drop. > I know it might be related to codec issue, but I've my HQ-RTR configured > with Xcoder which it is up and active but the call still failing. I also > did have the trunk in cucm "Wait for Far End > H.245 Terminal Capability Set" unchecked. > > once things I notice is that, my call doesn't seems get re-originated on > the cube router to BR2 router, what I see during ringing state my "show > gatekeeper endpoint" show the call is directly from the CUCM to BR2 It > is only 2 call legs instead of 4 (see below). > > hm, what have I missed? > > Some Info: > HQ Router (R1) > > interface Loopback0 > ip address 172.1.254.1 255.255.255.255 > h323-gateway voip interface > h323-gateway voip id VIA ipaddr 172.1.254.1 1719 h323-gateway voip > h323-id R1 h323-gateway voip bind srcaddr 172.1.254.1 > > gatekeeper > zone local UCM 172.1.254.1 > zone local UCME outvia VIA > zone local VIA > zone prefix UCME 3... > gw-type-prefix 1#* default-technology > no shutdown > > dial-peer voice 30 voip > destination-pattern 3... > session target ras > codec g711ulaw > ! > dial-peer voice 31 voip > incoming called-number 3... > > Total number of active calls = 1. > GATEKEEPER CALL INFO > ==================== > LocalCallID Age(secs) BW > 511-32797 6 16(Kbps) > Endpt(s): Alias E.164Addr > src EP: gk_trunk_2 5001 > CallSignalAddr Port RASSignalAddr Port > 172.1.10.20 38233 172.1.10.20 32795 > Endpt(s): Alias E.164Addr > dst EP: R3 3003 > CallSignalAddr Port RASSignalAddr Port > 172.3.254.1 1720 172.3.254.1 49395 > > GATEKEEPER ENDPOINT REGISTRATION > ================================ > CallSignalAddr Port RASSignalAddr Port Zone Name Type > Flags > --------------- ----- --------------- ----- --------- ---- > ----- > 172.1.10.10 47142 172.1.10.10 32838 UCM VOIP-GW > H323-ID: gk_trunk_1 > Voice Capacity Max.= Avail.= Current.= 0 > 172.1.10.20 38233 172.1.10.20 32795 UCM VOIP-GW > H323-ID: gk_trunk_2 > Voice Capacity Max.= Avail.= Current.= 0 > 172.1.254.1 1720 172.1.254.2 56974 VIA H323-GW > H323-ID: R1 > Voice Capacity Max.= Avail.= Current.= 0 > 172.3.254.1 1720 172.3.254.1 49395 VIA H323-GW > H323-ID: R3 > Voice Capacity Max.= Avail.= Current.= 0 Total number of active > registrations = 4 > > R1(config-if)#do sh gatek gw > GATEWAY TYPE PREFIX TABLE > ========================= > Prefix: 1#* (Default gateway-technology) > Zone UCM master gateway list: > 172.1.10.20:38233 gk_trunk_2 > 172.1.10.10:47142 gk_trunk_1 > Zone VIA master gateway list: > 172.3.254.1:1720 R3 > 172.1.254.2:1720 R1 > > BR2 Router (R2) > > interface Loopback0 > ip address 172.3.254.1 255.255.255.255 > h323-gateway voip interface > h323-gateway voip id VIA ipaddr 172.1.254.1 1719 > h323-gateway voip h323-id R3 > h323-gateway voip tech-prefix 1# > h323-gateway voip bind srcaddr 172.3.254.1 > > dial-peer voice 10 voip > incoming called-number 3... > dtmf-relay rtp-nte > codec g711ulaw > ! > > CUCM Trunk > the trunk was assign a separate DP with a region that using G729 when > calling HQ and BR2. > > > > Regards, > Alex > _______________________________________________ > For more information regarding industry leading CCIE Lab training, > please visit www.ipexpert.com > > > ************************************************************************ > ************************************************************************ > ********************************************************************* > * This Communication is Private & Confidential. This message and any > attachments may contain information that is privileged and / or > confidential and is the property of MHD InfoTech LLC. > * > * It is intended solely for the person to whom it is addressed. If you > are not the intended recipient, you are hereby notified that you are not > authorized to read, print, retain copy, disseminate, distribute, or * > * use this message & any attachments or any part thereof. If you have > received this message in error, please notify the sender immediately and > delete the message and any attachments from your system. * > ************************************************************************ > ************************************************************************ > ********************************************************************* > > > > > > > ------------------------------ > > Message: 4 > Date: Sun, 10 Apr 2011 13:55:50 +0500 > From: must ccie <mustc...@gmail.com> > To: ccie_voice@onlinestudylist.com > Subject: [OSL | CCIE_Voice] vRack Vouchers for Sale! > Message-ID: <banlktimgmy0chi2nwkhwp+7c2bznk11...@mail.gmail.com> > Content-Type: text/plain; charset="iso-8859-1" > > I have few voice vrack vouchers left for sale. any1 interested , unicast > me. > > cheerz > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20110410/1f499ecd/attachment-0001.html > > > > ------------------------------ > > Message: 5 > Date: Sun, 10 Apr 2011 03:20:54 -0700 > From: Shrini <linuxbos...@gmail.com> > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] time-zone in telephony-serv > Message-ID: <4da18486.3070...@gmail.com> > Content-Type: text/plain; charset="iso-8859-1"; Format="flowed" > > I changed time-zone to 8 and then did "no create cnf" / create cnf and > restart all. > But still the time-zone is incorrect. Both are skinny phones. > > Please advice. > > T I A > Shrini > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20110410/fc994a73/attachment-0001.html > > > > ------------------------------ > > Message: 6 > Date: Sun, 10 Apr 2011 11:47:25 +0100 > From: "Duncan Hamilton-Walker" <dun...@rosethorn.plus.com> > To: <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] vRack Vouchers for Sale > Message-ID: <002701cbf76c$ae94b120$0bbe1360$@plus.com> > Content-Type: text/plain; charset="us-ascii" > > Dear all, > > > > I have 45 vrack vouchers to sale.. i'm not going to use them.. so email > me > if interested.. > > > > Thanks > > Duncan > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20110410/7dca2d3c/attachment-0001.html > > > > ------------------------------ > > Message: 7 > Date: Sun, 10 Apr 2011 11:21:12 +0000 > From: Naoufal Kerboute <naou...@mhdinfotech.com> > To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> > Subject: [OSL | CCIE_Voice] UCCX Script (Redirect call based on the > calling number) > Message-ID: > > <a1e0b7fadebf714f9a15622f35b1234f6e0db...@mhditmbx.mhdinfotech.com> > Content-Type: text/plain; charset="us-ascii" > > Dear gents, > > I'm working on UCCX section and I'm trying to reroute some calls coming > from Spain (+34) to a specific extension. I've setup the script and it's > working only if I set the calling number variable to full Spain PSTN > number, but let take the case for many number from Spain. > How can I reroute calls coming from spain to a specific extension (I > don't want to much the full muber, I want to much only calling number > start with +34) > > Any ideas? > > Thanks a lot > Naoufal > > > > ************************************************************************ > ************************************************************************ > ********************************************************************* > * This Communication is Private & Confidential. This message and any > attachments may contain information that is privileged and / or > confidential and is the property of MHD InfoTech LLC. > * > * It is intended solely for the person to whom it is addressed. If you > are not the intended recipient, you are hereby notified that you are not > authorized to read, print, retain copy, disseminate, distribute, or * > * use this message & any attachments or any part thereof. If you have > received this message in error, please notify the sender immediately and > delete the message and any attachments from your system. * > ************************************************************************ > ************************************************************************ > ********************************************************************* > > > -------------- next part -------------- > An HTML attachment was scrubbed... > URL: > </archives/ccie_voice/attachments/20110410/c283aea3/attachment.html> > > ------------------------------ > > _______________________________________________ > CCIE_Voice mailing list > CCIE_Voice@onlinestudylist.com > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > End of CCIE_Voice Digest, Vol 62, Issue 54 > ****************************************** > > This email and any files transmitted with it are confidential and are > intended for the sole use of the individual(s) to whom they are properly > addressed. Any use, dissemination or forwarding of this email and any > files transmitted with it by anyone other than the intended recipient(s) > is strictly prohibited. If you have received this email in error, please > notify the sender by replying to this email. Black Box Corporation and > its affiliates reserve the right to scan and monitor all e-mail traffic. > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com