I have ran into the same thing, see the note below from one of my
colleagues, I believe it is fixed with firmware 9.1.x, but I cannot
access the Cisco bug tool at the moment. I am not sure about your first
issue with Calling name in SRST mode. But the phones not coming back up
is what I am addressing.
FYI, If you have any phones that are running SCCP v8.4.x ( was
distributed with UCM 7.1.x ) they will most likely have issues
registering with SRST, they either do not register at all or will
register the ephone but not any DNs.
Larry Stern
Senior Systems Engineer
Black Box Network Services
Long Island Voice/Data
6000 New Horizons Blvd.
Amittyville, NY, 11701
Direct: +1631.841.5225
www.blackbox.com
-----Original Message-----
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of
ccie_voice-requ...@onlinestudylist.com
Sent: Sunday, April 10, 2011 7:28 AM
To: ccie_voice@onlinestudylist.com
Subject: CCIE_Voice Digest, Vol 62, Issue 54
Send CCIE_Voice mailing list submissions to
ccie_voice@onlinestudylist.com
To subscribe or unsubscribe via the World Wide Web, visit
http://onlinestudylist.com/mailman/listinfo/ccie_voice
or, via email, send a message with subject or body 'help' to
ccie_voice-requ...@onlinestudylist.com
You can reach the person managing the list at
ccie_voice-ow...@onlinestudylist.com
When replying, please edit your Subject line so it is more specific
than "Re: Contents of CCIE_Voice digest..."
Today's Topics:
1. Re: CME SRST: calling name configuration (adam compton)
2. Changing Network Settings on SIP Firmware 7961 (Mann Chaddha)
3. Re: Gatekeeper + CUBE (WB2 Lab1 4.2) (Naoufal Kerboute)
4. vRack Vouchers for Sale! (must ccie)
5. time-zone in telephony-serv (Shrini)
6. vRack Vouchers for Sale (Duncan Hamilton-Walker)
7. UCCX Script (Redirect call based on the calling number)
(Naoufal Kerboute)
----------------------------------------------------------------------
Message: 1
Date: Sat, 9 Apr 2011 23:41:40 -0400
From: adam compton <com...@gmail.com>
To: Miron Kobelski <findko...@gmail.com>
Cc: ccie_voice@onlinestudylist.com
Subject: Re: [OSL | CCIE_Voice] CME SRST: calling name configuration
Message-ID: <BANLkTi=on9m68hqixawb+3v2jgrgavb...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
I've had the same problem. I never knew what to think of it. I assumed
that's just how it works.
On Sat, Apr 9, 2011 at 2:57 PM, Miron Kobelski <findko...@gmail.com>
wrote:
> Hello,
>
> I was playing with CME SRST today and I encountered the same issue
again. I
> configured CME SRST with srst mode auto-provision all.
> Phones reregistered to SRST correctly, ephone and ephone-dn
configuration
> appeared in the config. By default, each ephone-dn is configured with
CUCM
> external phone mask as a calling name. Is it possible to change
ephone's
> calling name to something other in CME SRST?
>
> When I changed the name under ephone-dn and restarted the phone. It
> reregistered, but DN didn't appear on the button (couldn't make any
calls).
> Is it normal/expected behaviour or I missed something?
>
>
> best regards
> kobel
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training,
please
> visit www.ipexpert.com
>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
</archives/ccie_voice/attachments/20110409/a4678fac/attachment-0001.html
>
------------------------------
Message: 2
Date: Sun, 10 Apr 2011 10:43:46 +0530
From: Mann Chaddha <mann.chad...@gmail.com>
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Changing Network Settings on SIP Firmware
7961
Message-ID: <BANLkTin+sWfthwoDrun2w0d8Uh=dywj...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
Hi All
I am running Lab 9 & am facing this issue. My home phone 7961 has a SIP
firmware on it & is trying to register to the Br1-CME (Voice Register
Global). I need to edit the TFTP Server settings on the phone but itas
prompting for a username & password.
What are the defaults for these?
Thanks
Mann
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
</archives/ccie_voice/attachments/20110410/d926b5bd/attachment-0001.html
>
------------------------------
Message: 3
Date: Sat, 9 Apr 2011 18:19:39 +0000
From: Naoufal Kerboute <naou...@mhdinfotech.com>
To: Alex Goh <ncsalex....@gmail.com>, "ccie_voice@onlinestudylist.com"
<ccie_voice@onlinestudylist.com>
Subject: Re: [OSL | CCIE_Voice] Gatekeeper + CUBE (WB2 Lab1 4.2)
Message-ID:
<a1e0b7fadebf714f9a15622f35b1234f53869...@mhditmbx.mhdinfotech.com>
Content-Type: text/plain; charset="us-ascii"
Hi,
You have to register the br2 with the UCME zone not the VIA zone.
Remove h323-gateway voip id VIA ipaddr 172.1.254.1 1719
and replace it with
h323-gateway voip id UCME ipaddr 172.1.254.1 1719
Thanks
Naoufal
-----Original Message-----
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Alex Goh
Sent: Saturday, April 09, 2011 9:43 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Gatekeeper + CUBE (WB2 Lab1 4.2)
Hi Guys,
I'm trying to get the solutions for question 4.2 to work, but apparently
I'm missing something and hope someone can help.
I've search thru the list but doesn't really found a solution work for
my case.
The issue I've encounter are when HQ phone 5001 calling BR2 phone 3003,
3003 ring, but when i tried to answered, the call drop.
I know it might be related to codec issue, but I've my HQ-RTR configured
with Xcoder which it is up and active but the call still failing. I also
did have the trunk in cucm "Wait for Far End
H.245 Terminal Capability Set" unchecked.
once things I notice is that, my call doesn't seems get re-originated on
the cube router to BR2 router, what I see during ringing state my "show
gatekeeper endpoint" show the call is directly from the CUCM to BR2 It
is only 2 call legs instead of 4 (see below).
hm, what have I missed?
Some Info:
HQ Router (R1)
interface Loopback0
ip address 172.1.254.1 255.255.255.255
h323-gateway voip interface
h323-gateway voip id VIA ipaddr 172.1.254.1 1719 h323-gateway voip
h323-id R1 h323-gateway voip bind srcaddr 172.1.254.1
gatekeeper
zone local UCM 172.1.254.1
zone local UCME outvia VIA
zone local VIA
zone prefix UCME 3...
gw-type-prefix 1#* default-technology
no shutdown
dial-peer voice 30 voip
destination-pattern 3...
session target ras
codec g711ulaw
!
dial-peer voice 31 voip
incoming called-number 3...
Total number of active calls = 1.
GATEKEEPER CALL INFO
====================
LocalCallID Age(secs) BW
511-32797 6 16(Kbps)
Endpt(s): Alias E.164Addr
src EP: gk_trunk_2 5001
CallSignalAddr Port RASSignalAddr Port
172.1.10.20 38233 172.1.10.20 32795
Endpt(s): Alias E.164Addr
dst EP: R3 3003
CallSignalAddr Port RASSignalAddr Port
172.3.254.1 1720 172.3.254.1 49395
GATEKEEPER ENDPOINT REGISTRATION
================================
CallSignalAddr Port RASSignalAddr Port Zone Name Type
Flags
--------------- ----- --------------- ----- --------- ----
-----
172.1.10.10 47142 172.1.10.10 32838 UCM VOIP-GW
H323-ID: gk_trunk_1
Voice Capacity Max.= Avail.= Current.= 0
172.1.10.20 38233 172.1.10.20 32795 UCM VOIP-GW
H323-ID: gk_trunk_2
Voice Capacity Max.= Avail.= Current.= 0
172.1.254.1 1720 172.1.254.2 56974 VIA H323-GW
H323-ID: R1
Voice Capacity Max.= Avail.= Current.= 0
172.3.254.1 1720 172.3.254.1 49395 VIA H323-GW
H323-ID: R3
Voice Capacity Max.= Avail.= Current.= 0 Total number of active
registrations = 4
R1(config-if)#do sh gatek gw
GATEWAY TYPE PREFIX TABLE
=========================
Prefix: 1#* (Default gateway-technology)
Zone UCM master gateway list:
172.1.10.20:38233 gk_trunk_2
172.1.10.10:47142 gk_trunk_1
Zone VIA master gateway list:
172.3.254.1:1720 R3
172.1.254.2:1720 R1
BR2 Router (R2)
interface Loopback0
ip address 172.3.254.1 255.255.255.255
h323-gateway voip interface
h323-gateway voip id VIA ipaddr 172.1.254.1 1719
h323-gateway voip h323-id R3
h323-gateway voip tech-prefix 1#
h323-gateway voip bind srcaddr 172.3.254.1
dial-peer voice 10 voip
incoming called-number 3...
dtmf-relay rtp-nte
codec g711ulaw
!
CUCM Trunk
the trunk was assign a separate DP with a region that using G729 when
calling HQ and BR2.
Regards,
Alex
_______________________________________________
For more information regarding industry leading CCIE Lab training,
please visit www.ipexpert.com
************************************************************************
************************************************************************
*********************************************************************
* This Communication is Private & Confidential. This message and any
attachments may contain information that is privileged and / or
confidential and is the property of MHD InfoTech LLC.
*
* It is intended solely for the person to whom it is addressed. If you
are not the intended recipient, you are hereby notified that you are not
authorized to read, print, retain copy, disseminate, distribute, or *
* use this message & any attachments or any part thereof. If you have
received this message in error, please notify the sender immediately and
delete the message and any attachments from your system. *
************************************************************************
************************************************************************
*********************************************************************
------------------------------
Message: 4
Date: Sun, 10 Apr 2011 13:55:50 +0500
From: must ccie <mustc...@gmail.com>
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] vRack Vouchers for Sale!
Message-ID: <banlktimgmy0chi2nwkhwp+7c2bznk11...@mail.gmail.com>
Content-Type: text/plain; charset="iso-8859-1"
I have few voice vrack vouchers left for sale. any1 interested , unicast
me.
cheerz
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
</archives/ccie_voice/attachments/20110410/1f499ecd/attachment-0001.html
>
------------------------------
Message: 5
Date: Sun, 10 Apr 2011 03:20:54 -0700
From: Shrini <linuxbos...@gmail.com>
To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: [OSL | CCIE_Voice] time-zone in telephony-serv
Message-ID: <4da18486.3070...@gmail.com>
Content-Type: text/plain; charset="iso-8859-1"; Format="flowed"
I changed time-zone to 8 and then did "no create cnf" / create cnf and
restart all.
But still the time-zone is incorrect. Both are skinny phones.
Please advice.
T I A
Shrini
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
</archives/ccie_voice/attachments/20110410/fc994a73/attachment-0001.html
>
------------------------------
Message: 6
Date: Sun, 10 Apr 2011 11:47:25 +0100
From: "Duncan Hamilton-Walker" <dun...@rosethorn.plus.com>
To: <ccie_voice@onlinestudylist.com>
Subject: [OSL | CCIE_Voice] vRack Vouchers for Sale
Message-ID: <002701cbf76c$ae94b120$0bbe1360$@plus.com>
Content-Type: text/plain; charset="us-ascii"
Dear all,
I have 45 vrack vouchers to sale.. i'm not going to use them.. so email
me
if interested..
Thanks
Duncan
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
</archives/ccie_voice/attachments/20110410/7dca2d3c/attachment-0001.html
>
------------------------------
Message: 7
Date: Sun, 10 Apr 2011 11:21:12 +0000
From: Naoufal Kerboute <naou...@mhdinfotech.com>
To: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Subject: [OSL | CCIE_Voice] UCCX Script (Redirect call based on the
calling number)
Message-ID:
<a1e0b7fadebf714f9a15622f35b1234f6e0db...@mhditmbx.mhdinfotech.com>
Content-Type: text/plain; charset="us-ascii"
Dear gents,
I'm working on UCCX section and I'm trying to reroute some calls coming
from Spain (+34) to a specific extension. I've setup the script and it's
working only if I set the calling number variable to full Spain PSTN
number, but let take the case for many number from Spain.
How can I reroute calls coming from spain to a specific extension (I
don't want to much the full muber, I want to much only calling number
start with +34)
Any ideas?
Thanks a lot
Naoufal
************************************************************************
************************************************************************
*********************************************************************
* This Communication is Private & Confidential. This message and any
attachments may contain information that is privileged and / or
confidential and is the property of MHD InfoTech LLC.
*
* It is intended solely for the person to whom it is addressed. If you
are not the intended recipient, you are hereby notified that you are not
authorized to read, print, retain copy, disseminate, distribute, or *
* use this message & any attachments or any part thereof. If you have
received this message in error, please notify the sender immediately and
delete the message and any attachments from your system. *
************************************************************************
************************************************************************
*********************************************************************
-------------- next part --------------
An HTML attachment was scrubbed...
URL:
</archives/ccie_voice/attachments/20110410/c283aea3/attachment.html>
------------------------------
_______________________________________________
CCIE_Voice mailing list
CCIE_Voice@onlinestudylist.com
http://onlinestudylist.com/mailman/listinfo/ccie_voice
End of CCIE_Voice Digest, Vol 62, Issue 54
******************************************
This email and any files transmitted with it are confidential and are
intended for the sole use of the individual(s) to whom they are properly
addressed. Any use, dissemination or forwarding of this email and any
files transmitted with it by anyone other than the intended recipient(s)
is strictly prohibited. If you have received this email in error, please
notify the sender by replying to this email. Black Box Corporation and
its affiliates reserve the right to scan and monitor all e-mail traffic.
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
