Hi guys, So instead of using a vlan interface to bind the CUE module on BR2, I tried to use a loopback and for some reason I cannot ping the module. config below. (it works fine with a vlan or ethernet interface)
interface Loopback1 ip address 10.10.222.1 255.255.255.252 ip ospf network point-to-point ! interface Service-Engine0/0 ip unnumbered Loopback1 service-module ip address 10.10.222.2 255.255.255.252 service-module ip default-gateway 10.10.222.1 ! ip route 10.10.222.2 255.255.255.255 Service-Engine0/0 ! BR2-RTR#ping 10.10.222.2 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 10.10.222.2, timeout is 2 seconds: ... Any thoughts? Thx
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and Looking for a Job check out www.PlatinumPlacement.co