I'm on proctorlabs rack now and decided to have a look and my config below works. I can ping the CUE IP
interface Service-Engine0/0 ip unnumbered Loopback1 ip ospf network point-to-point service-module ip address 10.10.222.2 255.255.255.252 service-module ip default-gateway 10.10.222.1 interface Loopback1 ip address 10.10.222.1 255.255.255.252 ip ospf network point-to-point ip route 10.10.222.2 255.255.255.255 Service-Engine0/0 router ospf 1 router-id 10.10.202.1 log-adjacency-changes network 10.10.0.0 0.0.255.255 area 0 > On 18 April 2011 18:43, romain mullier <romain.mull...@gmail.com> wrote: > >> I am not using a vlan interface in this case but a loopback. >> >> >> On Mon, Apr 18, 2011 at 11:37 AM, CCIE For ME <cciefo...@hotmail.com>wrote: >> >>> make sure the port that a phone is connected to has the vlan assigned >>> and is “no shut”. One device has to use the vlan for it to be active. >>> >>> *From:* romain mullier <romain.mull...@gmail.com> >>> *Sent:* Monday, April 18, 2011 11:11 AM >>> *To:* ccie_voice@onlinestudylist.com >>> *Subject:* [OSL | CCIE_Voice] CUE to use loopback IP >>> >>> >>> Hi guys, >>> So instead of using a vlan interface to bind the CUE module on BR2, I >>> tried to use a loopback and for some reason I cannot ping the module. config >>> below. (it works fine with a vlan or ethernet interface) >>> >>> interface Loopback1 >>> ip address 10.10.222.1 255.255.255.252 >>> ip ospf network point-to-point >>> ! >>> interface Service-Engine0/0 >>> ip unnumbered Loopback1 >>> service-module ip address 10.10.222.2 255.255.255.252 >>> service-module ip default-gateway 10.10.222.1 >>> ! >>> ip route 10.10.222.2 255.255.255.255 Service-Engine0/0 >>> ! >>> >>> BR2-RTR#ping 10.10.222.2 >>> Type escape sequence to abort. >>> Sending 5, 100-byte ICMP Echos to 10.10.222.2, timeout is 2 seconds: >>> ... >>> >>> Any thoughts? >>> >>> Thx >>> >>> ------------------------------ >>> _______________________________________________ >>> For more information regarding industry leading CCIE Lab training, please >>> visit www.ipexpert.com >>> >>> Are you a CCNP or CCIE and Looking for a Job check out >>> www.PlatinumPlacement.co <http://www.platinumplacement.co/> >>> >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and Looking for a Job – check out >> www.PlatinumPlacement.co <http://www.platinumplacement.co/> >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and Looking for a Job check out www.PlatinumPlacement.co