i think, you should use the highest available auto configured threshold for
that queue.

-adil


On Wed, Jun 1, 2011 at 11:23 AM, Cristobal Priego <cristobalpri...@gmail.com
> wrote:

> hello all,
>
> I have a question for you guys
>
> hopefully you can help me understand, this is way too confusing for me
>
> when i issue auto qos on a 3750 switch this is how the config will look
> like
>
>
>
> mls qos srr-queue output cos-map queue 1 threshold 3  5
> mls qos srr-queue output cos-map queue 2 threshold 3  3 6 7
> mls qos srr-queue output cos-map queue 3 threshold 3  2 4
> mls qos srr-queue output cos-map queue 4 threshold 2  1
> mls qos srr-queue output cos-map queue 4 threshold 3  0
> mls qos srr-queue output dscp-map queue 1 threshold 3  40 41 42 43 44 45 46
> 47
> mls qos srr-queue output dscp-map queue 2 threshold 3  24 25 26 27 28 29 30
> 31
> mls qos srr-queue output dscp-map queue 2 threshold 3  48 49 50 51 52 53 54
> 55
> mls qos srr-queue output dscp-map queue 2 threshold 3  56 57 58 59 60 61 62
> 63
> mls qos srr-queue output dscp-map queue 3 threshold 3  16 17 18 19 20 21 22
> 23
> mls qos srr-queue output dscp-map queue 3 threshold 3  32 33 34 35 36 37 38
> 39
> mls qos srr-queue output dscp-map queue 4 threshold 1  8
> mls qos srr-queue output dscp-map queue 4 threshold 2  9 10 11 12 13 14 15
> mls qos srr-queue output dscp-map queue 4 threshold 3  0 1 2 3 4 5 6 7
> mls qos queue-set output 1 threshold 1 138 138 92 138
> mls qos queue-set output 1 threshold 2 138 138 92 400
> mls qos queue-set output 1 threshold 3 36 77 100 318
> mls qos queue-set output 1 threshold 4 20 50 67 400
> mls qos queue-set output 2 threshold 1 149 149 100 149
> mls qos queue-set output 2 threshold 2 118 118 100 235
> mls qos queue-set output 2 threshold 3 41 68 100 272
> mls qos queue-set output 2 threshold 4 42 72 100 242
> mls qos queue-set output 1 buffers 10 10 26 54
> mls qos queue-set output 2 buffers 16 6 17 61
> mls qos
>
>
> when i'm asked to change the COS or DSCP values from Q to Q
>
> how do I know which threshold to use ?
>
> for exambple
>
> if i'm asked to configure the COS valus 2,3 to Queue 4
>
> how do i know on which threshold withing Q4 ?
>
>
>
> does my question make sense ?  this part of the threshold is very confusing
> for me
>
> hopefully you can help me out
>
>
> thanks
>
>
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>



-- 
  .            . . .
_7___|___|_|_|    adil.sha...@gmail.com

        . .
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to