If they are asking to move Queues, then I don't think it matters. I would use the same threshold as the current queue. So for your example move 2 and 4 to queue 4 threshold 3. Don't forget to do the DSCP values to match.
Sam. On Wed, Jun 1, 2011 at 8:44 PM, Adil Shaikh <adil.sha...@gmail.com> wrote: > i think, you should use the highest available auto configured threshold for > that queue. > > -adil > > > On Wed, Jun 1, 2011 at 11:23 AM, Cristobal Priego < > cristobalpri...@gmail.com> wrote: > >> hello all, >> >> I have a question for you guys >> >> hopefully you can help me understand, this is way too confusing for me >> >> when i issue auto qos on a 3750 switch this is how the config will look >> like >> >> >> >> mls qos srr-queue output cos-map queue 1 threshold 3 5 >> mls qos srr-queue output cos-map queue 2 threshold 3 3 6 7 >> mls qos srr-queue output cos-map queue 3 threshold 3 2 4 >> mls qos srr-queue output cos-map queue 4 threshold 2 1 >> mls qos srr-queue output cos-map queue 4 threshold 3 0 >> mls qos srr-queue output dscp-map queue 1 threshold 3 40 41 42 43 44 45 >> 46 47 >> mls qos srr-queue output dscp-map queue 2 threshold 3 24 25 26 27 28 29 >> 30 31 >> mls qos srr-queue output dscp-map queue 2 threshold 3 48 49 50 51 52 53 >> 54 55 >> mls qos srr-queue output dscp-map queue 2 threshold 3 56 57 58 59 60 61 >> 62 63 >> mls qos srr-queue output dscp-map queue 3 threshold 3 16 17 18 19 20 21 >> 22 23 >> mls qos srr-queue output dscp-map queue 3 threshold 3 32 33 34 35 36 37 >> 38 39 >> mls qos srr-queue output dscp-map queue 4 threshold 1 8 >> mls qos srr-queue output dscp-map queue 4 threshold 2 9 10 11 12 13 14 15 >> mls qos srr-queue output dscp-map queue 4 threshold 3 0 1 2 3 4 5 6 7 >> mls qos queue-set output 1 threshold 1 138 138 92 138 >> mls qos queue-set output 1 threshold 2 138 138 92 400 >> mls qos queue-set output 1 threshold 3 36 77 100 318 >> mls qos queue-set output 1 threshold 4 20 50 67 400 >> mls qos queue-set output 2 threshold 1 149 149 100 149 >> mls qos queue-set output 2 threshold 2 118 118 100 235 >> mls qos queue-set output 2 threshold 3 41 68 100 272 >> mls qos queue-set output 2 threshold 4 42 72 100 242 >> mls qos queue-set output 1 buffers 10 10 26 54 >> mls qos queue-set output 2 buffers 16 6 17 61 >> mls qos >> >> >> when i'm asked to change the COS or DSCP values from Q to Q >> >> how do I know which threshold to use ? >> >> for exambple >> >> if i'm asked to configure the COS valus 2,3 to Queue 4 >> >> how do i know on which threshold withing Q4 ? >> >> >> >> does my question make sense ? this part of the threshold is very >> confusing for me >> >> hopefully you can help me out >> >> >> thanks >> >> >> _______________________________________________ >> For more information regarding industry leading CCIE Lab training, please >> visit www.ipexpert.com >> >> Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> > > > > -- > . . . . > _7___|___|_|_| adil.sha...@gmail.com > > . . > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
