Just to add, from a CCIE scope, the IPX way is enough - we simply need to manually add the pri-group timeslots command with the correct number of channels that need to be used. Not required to modify any service parameter on CUCM.
>From the exams perspective, I would suggest: 1. Downloading the configuration from CUCM by adding the ccm-manager config and ccm-manager config server commands after configuring everything on CUCM. 2. This should add the pri-group timeslots command with 24 channels. 3. Shut down the voice-port/serial interface/controller and remove L3 binding from the Serial interface 4. Remove the ccm-manager config/ccm-manager config server commands. 5. Remove the pri-g timeslots command and re-add it with the correct number of channels. No shut the controller and the serial interface (if applicable). 6. Manually add L3 binding on the Serial interface. Issue a no mgcp/mgcp Should be good to go. On Mon, Oct 3, 2011 at 11:17 AM, Kshitij Singhi <martinian.ksin...@gmail.com > wrote: > Fractional MGCP controlled PRIs are not supported by TAC. It's not possible > to configure a fractional PRI by downloading the config from CUCM via the > following commands: > > ccm-manager config > ccm-manager config server <IP> > > However, a fractional MGCP controlled PRI works fine when the GW is > manually configured. To do this, we need to add the following commands on > the GW: > > ccm-m mgc > ccm-m call-agent <IP> > ccm-m redun <IP> (If applicable) > controller t1 x/y/z > pri-g time 1-5 ser mgc (assuming 5 channels are being used - the Telco will > need to be configured accordingly as well) > int ser x/y/z:23 > isdn bind-l3 ccm-manager > mgcp > > The statement "CUCM does not support a fractional MGCP controlled PRI" > might not be entirely accurate since CUCM definitely works great with a > fractional MGCP controlled PRI. I guess saying that "CUCM cannot auto > configure a fractional MGCP controlled PRI" would be more accurate. > > In the case of a fractional PRI, CUCM sends AUEP messages to the GW for the > "unconfigured" channels on the PRI, but the GW responds with an "endpoint > unknown" message - hence, CUCM does not consider those channels during call > routing. > > On Sun, Oct 2, 2011 at 11:42 AM, > <ccie_voice-requ...@onlinestudylist.com>wrote: > >> Send CCIE_Voice mailing list submissions to >> ccie_voice@onlinestudylist.com >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://onlinestudylist.com/mailman/listinfo/ccie_voice >> or, via email, send a message with subject or body 'help' to >> ccie_voice-requ...@onlinestudylist.com >> >> You can reach the person managing the list at >> ccie_voice-ow...@onlinestudylist.com >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of CCIE_Voice digest..." >> >> >> Today's Topics: >> >> 1. Re: I need hardware Vpn assistance on a session now >> (Marko Milivojevic) >> 2. Re: I need hardware Vpn assistance on a session now >> (pithog...@yahoo.com) >> 3. Re: Fractional MGCP (Robert Thomas) >> 4. Re: I need hardware Vpn assistance on a session now (Rrcrumm) >> 5. PREDOT DDI vs NANP:PREDOT DDI (Ken Wyan) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sat, 1 Oct 2011 13:51:57 -0700 >> From: Marko Milivojevic <mar...@ipexpert.com> >> To: edgar feliz <ejfeli...@yahoo.com> >> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>, >> "pithog...@yahoo.com" <pithog...@yahoo.com> >> Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session now >> Message-ID: >> <CAGDYm0wMnWMYZBDGDhh= >> fpiyf_n99kqqfjkd+hnkntkirjt...@mail.gmail.com> >> Content-Type: text/plain; charset=UTF-8 >> >> We've had somewhat a perfect storm of multiple things go wrong. We >> should be operational right now and we have several support cases open >> with our ISPs and equipment vendors. >> >> Please, get in touch with our support at supp...@ipexpert.com and >> supp...@proctorlabs.com with any issues that you may still be having. >> We have our entire support and technical team, including all the >> instructors working on maintaing our services up and running at the >> level you are all used to. >> >> We sincerely apologize for the inconveniences. >> >> -- >> Marko Milivojevic - CCIE #18427 >> Senior Technical Instructor - IPexpert >> >> FREE CCIE training: http://bit.ly/vLecture >> >> Mailto: mar...@ipexpert.com >> Telephone: +1.810.326.1444 >> Web: http://www.ipexpert.com/ >> >> On Sat, Oct 1, 2011 at 11:34, edgar feliz <ejfeli...@yahoo.com> wrote: >> > To many people are having issue for it to be "operator error" >> > it's?definitely something on their end ISP etc. >> > EJF >> > ________________________________ >> > From: Chris Martin <clm.c...@gmail.com> >> > To: pithog...@yahoo.com >> > Cc: ccie_voice@onlinestudylist.com >> > Sent: Saturday, October 1, 2011 10:31 AM >> > Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session >> > now >> > >> > You can open a case with support, that would be the quickest way to get >> > their help. ?Did you use IPE's configuration for hardware vpn? ?What >> type of >> > router are you using? ?Did you enter the commands to initiate the xauth? >> > Chris >> > >> > On Sat, Oct 1, 2011 at 5:58 AM, <pithog...@yahoo.com> wrote: >> > >> > I am on a current session now and I can't access proctorlabs via >> hardware >> > vpn, my router can ping internet but my laptop connected to the router >> can't >> > access the internet so as to initiate hardware VPN . >> > >> > Please help, you can even connect to my laptop via team viewer . >> > >> > Experts kindly assist >> > >> > Pithohoil >> > Sent from my BlackBerry? Smartphone, from Etisalat. Enjoy high speed >> > internet service with Etisalat easy net, available at all our experience >> > centres >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> >> >> ------------------------------ >> >> Message: 2 >> Date: Sat, 1 Oct 2011 21:00:34 +0000 >> From: pithog...@yahoo.com >> To: "Marko Milivojevic" <mar...@ipexpert.com>, "edgar feliz" >> <ejfeli...@yahoo.com> >> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>, >> supp...@ipexpert.com, supp...@proctorlabs.com >> Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session now >> Message-ID: >> >> >> <912523830-1317503026-cardhu_decombobulator_blackberry.rim.net-571320870-@b11.c3.bise7.blackberry >> > >> >> Content-Type: text/plain; charset="utf-8" >> >> The support people at ipexpert have not been helpful in recent times all >> they tell me is that there are not ccie level support engineers, I just >> changed my hardware vpn to a 881 router last week so its been difficult to >> ascertain where the issue is coming from although I have done all I should >> do on my end and I had issues through out this morning, as I speak I have >> just started a new session, I will appreciate some support now. >> >> Thanks marko >> Sent from my BlackBerry? Smartphone, from Etisalat. Enjoy high speed >> internet service with Etisalat easy net, available at all our experience >> centres >> >> -----Original Message----- >> From: Marko Milivojevic <mar...@ipexpert.com> >> Date: Sat, 1 Oct 2011 13:51:57 >> To: edgar feliz<ejfeli...@yahoo.com> >> Cc: Chris Martin<clm.c...@gmail.com>; pithog...@yahoo.com< >> pithog...@yahoo.com>; ccie_voice@onlinestudylist.com< >> ccie_voice@onlinestudylist.com> >> Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session now >> >> We've had somewhat a perfect storm of multiple things go wrong. We >> should be operational right now and we have several support cases open >> with our ISPs and equipment vendors. >> >> Please, get in touch with our support at supp...@ipexpert.com and >> supp...@proctorlabs.com with any issues that you may still be having. >> We have our entire support and technical team, including all the >> instructors working on maintaing our services up and running at the >> level you are all used to. >> >> We sincerely apologize for the inconveniences. >> >> -- >> Marko Milivojevic - CCIE #18427 >> Senior Technical Instructor - IPexpert >> >> FREE CCIE training: http://bit.ly/vLecture >> >> Mailto: mar...@ipexpert.com >> Telephone: +1.810.326.1444 >> Web: http://www.ipexpert.com/ >> >> On Sat, Oct 1, 2011 at 11:34, edgar feliz <ejfeli...@yahoo.com> wrote: >> > To many people are having issue for it to be "operator error" >> > it's?definitely something on their end ISP etc. >> > EJF >> > ________________________________ >> > From: Chris Martin <clm.c...@gmail.com> >> > To: pithog...@yahoo.com >> > Cc: ccie_voice@onlinestudylist.com >> > Sent: Saturday, October 1, 2011 10:31 AM >> > Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session >> > now >> > >> > You can open a case with support, that would be the quickest way to get >> > their help. ?Did you use IPE's configuration for hardware vpn? ?What >> type of >> > router are you using? ?Did you enter the commands to initiate the xauth? >> > Chris >> > >> > On Sat, Oct 1, 2011 at 5:58 AM, <pithog...@yahoo.com> wrote: >> > >> > I am on a current session now and I can't access proctorlabs via >> hardware >> > vpn, my router can ping internet but my laptop connected to the router >> can't >> > access the internet so as to initiate hardware VPN . >> > >> > Please help, you can even connect to my laptop via team viewer . >> > >> > Experts kindly assist >> > >> > Pithohoil >> > Sent from my BlackBerry? Smartphone, from Etisalat. Enjoy high speed >> > internet service with Etisalat easy net, available at all our experience >> > centres >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> >> ------------------------------ >> >> Message: 3 >> Date: Sat, 1 Oct 2011 15:38:14 -0600 >> From: Robert Thomas <tho...@gmail.com> >> To: Ken Wyan <kew...@gmail.com> >> Cc: ccie_voice@onlinestudylist.com >> Subject: Re: [OSL | CCIE_Voice] Fractional MGCP >> Message-ID: >> <CAJ2RBBCFy_ncn+jb_rcw6fhaop_d30neBq8TJ9V8K6oWAP= >> d...@mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> It's definetly not supported, since the MGCP protocol asume all channels >> are >> in service. You can use the service parameter to take them out of service >> from CUCM perspective. >> >> They do this to avoid allocating more DSP to bring all 24 channels, when >> you >> will only place a few calls, so they can save some bucks on rack >> equipment. >> >> On Sat, Oct 1, 2011 at 7:31 AM, Ken Wyan <kew...@gmail.com> wrote: >> >> > In IPX workbooks ; they limit number of channels just by pri-group >> > timeslots 1-5,24 service mgcp command only. ( I didn't go through all >> the >> > solutions yet , but I have seen this few times so far) >> > >> > But I think fractional pri for MGCP is not supported by CUCM as per >> Cisco >> > documentation. >> > >> > Somehow there's a way as below ( B chan maintenance & status poll ). >> > https://supportforums.cisco.com/thread/97578 ( not an official cisco >> > document) >> > >> > For CCIE scope , does IPX way is enough? But it will not do the required >> > job. >> > >> > Wyan >> > >> > >> > >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please >> > visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> > www.PlatinumPlacement.com >> > >> >> >> >> -- >> Robert >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: >> </archives/ccie_voice/attachments/20111001/1a4bd8ce/attachment-0001.html> >> >> ------------------------------ >> >> Message: 4 >> Date: Sat, 1 Oct 2011 21:47:39 -0700 >> From: Rrcrumm <rrcr...@yahoo.com> >> To: "pithog...@yahoo.com" <pithog...@yahoo.com> >> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>, >> "supp...@proctorlabs.com" <supp...@proctorlabs.com>, >> "supp...@ipexpert.com" <supp...@ipexpert.com> >> Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session now >> Message-ID: <8ae23c19-0158-4a7d-881d-48613d664...@yahoo.com> >> Content-Type: text/plain; charset=utf-8 >> >> Are you consoled onto the router? You need to do a command from the CLI to >> VPN in. O can't remember it offhand but it us something like, IPSec VPN >> client ezvpn connect, then the Cauthen command. Below you said you computer >> can't reach the Internet. You should use the router CLI. >> >> Hth >> Randall >> >> Sent from my iPhone >> >> On Oct 1, 2011, at 2:00 PM, pithog...@yahoo.com wrote: >> >> > The support people at ipexpert have not been helpful in recent times all >> they tell me is that there are not ccie level support engineers, I just >> changed my hardware vpn to a 881 router last week so its been difficult to >> ascertain where the issue is coming from although I have done all I should >> do on my end and I had issues through out this morning, as I speak I have >> just started a new session, I will appreciate some support now. >> > >> > Thanks marko >> > Sent from my BlackBerry? Smartphone, from Etisalat. Enjoy high speed >> internet service with Etisalat easy net, available at all our experience >> centres >> > >> > -----Original Message----- >> > From: Marko Milivojevic <mar...@ipexpert.com> >> > Date: Sat, 1 Oct 2011 13:51:57 >> > To: edgar feliz<ejfeli...@yahoo.com> >> > Cc: Chris Martin<clm.c...@gmail.com>; pithog...@yahoo.com< >> pithog...@yahoo.com>; ccie_voice@onlinestudylist.com< >> ccie_voice@onlinestudylist.com> >> > Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session now >> > >> > We've had somewhat a perfect storm of multiple things go wrong. We >> > should be operational right now and we have several support cases open >> > with our ISPs and equipment vendors. >> > >> > Please, get in touch with our support at supp...@ipexpert.com and >> > supp...@proctorlabs.com with any issues that you may still be having. >> > We have our entire support and technical team, including all the >> > instructors working on maintaing our services up and running at the >> > level you are all used to. >> > >> > We sincerely apologize for the inconveniences. >> > >> > -- >> > Marko Milivojevic - CCIE #18427 >> > Senior Technical Instructor - IPexpert >> > >> > FREE CCIE training: http://bit.ly/vLecture >> > >> > Mailto: mar...@ipexpert.com >> > Telephone: +1.810.326.1444 >> > Web: http://www.ipexpert.com/ >> > >> > On Sat, Oct 1, 2011 at 11:34, edgar feliz <ejfeli...@yahoo.com> wrote: >> >> To many people are having issue for it to be "operator error" >> >> it's definitely something on their end ISP etc. >> >> EJF >> >> ________________________________ >> >> From: Chris Martin <clm.c...@gmail.com> >> >> To: pithog...@yahoo.com >> >> Cc: ccie_voice@onlinestudylist.com >> >> Sent: Saturday, October 1, 2011 10:31 AM >> >> Subject: Re: [OSL | CCIE_Voice] I need hardware Vpn assistance on a >> session >> >> now >> >> >> >> You can open a case with support, that would be the quickest way to get >> >> their help. Did you use IPE's configuration for hardware vpn? What >> type of >> >> router are you using? Did you enter the commands to initiate the >> xauth? >> >> Chris >> >> >> >> On Sat, Oct 1, 2011 at 5:58 AM, <pithog...@yahoo.com> wrote: >> >> >> >> I am on a current session now and I can't access proctorlabs via >> hardware >> >> vpn, my router can ping internet but my laptop connected to the router >> can't >> >> access the internet so as to initiate hardware VPN . >> >> >> >> Please help, you can even connect to my laptop via team viewer . >> >> >> >> Experts kindly assist >> >> >> >> Pithohoil >> >> Sent from my BlackBerry? Smartphone, from Etisalat. Enjoy high speed >> >> internet service with Etisalat easy net, available at all our >> experience >> >> centres >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> >> Are you a CCNP or CCIE and looking for a job? Check out >> >> www.PlatinumPlacement.com >> >> >> >> >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> >> Are you a CCNP or CCIE and looking for a job? Check out >> >> www.PlatinumPlacement.com >> >> >> >> >> >> _______________________________________________ >> >> For more information regarding industry leading CCIE Lab training, >> please >> >> visit www.ipexpert.com >> >> >> >> Are you a CCNP or CCIE and looking for a job? Check out >> >> www.PlatinumPlacement.com >> >> >> > _______________________________________________ >> > For more information regarding industry leading CCIE Lab training, >> please visit www.ipexpert.com >> > >> > Are you a CCNP or CCIE and looking for a job? Check out >> www.PlatinumPlacement.com >> >> >> ------------------------------ >> >> Message: 5 >> Date: Sun, 2 Oct 2011 11:41:59 +0530 >> From: Ken Wyan <kew...@gmail.com> >> To: ccie_voice@onlinestudylist.com >> Subject: [OSL | CCIE_Voice] PREDOT DDI vs NANP:PREDOT DDI >> Message-ID: >> <CAPBg9B+pcTZrpNhLHpHSH73= >> 3czvmlokhpjypz91cycn+u9...@mail.gmail.com> >> Content-Type: text/plain; charset="iso-8859-1" >> >> Hi Experts, >> >> I want to strip digits of called number from CUCM (outgoing from CUCM). >> >> PREDOT DDI option is not available in Route-List / Route-Group level >> (unlike >> in route pattern). >> >> If we don't have NANP & want to strip predot-digits at route-group level >> what is the option? IPX Solutions just use NANP:PREDOT DDI ; but I have a >> doubt. >> >> Ken >> -------------- next part -------------- >> An HTML attachment was scrubbed... >> URL: </archives/ccie_voice/attachments/20111002/d99a724b/attachment.html> >> >> ------------------------------ >> >> _______________________________________________ >> CCIE_Voice mailing list >> CCIE_Voice@onlinestudylist.com >> http://onlinestudylist.com/mailman/listinfo/ccie_voice >> >> >> End of CCIE_Voice Digest, Vol 68, Issue 9 >> ***************************************** >> > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
