Hi Mercy, Did you configure this via tftp or manually? I'm asking because you've got this: ccm-manager config server x.x.x.x
Can you do: *debug ccm-manager config-download all *then do * no ccm-manager config ccm-manager config* And see if you are being able to download the config. paste the output here. As well you can attach the relevant pages of CCM configuration. Cheers, * * On Mon, Jan 16, 2012 at 2:35 PM, mercy forall <mercy_for_...@hotmail.com>wrote: > Hi, > > thanks for your support and good link\ > > this is my GW configuration , also it is connected to other cisco GW as > PSTN GW through E1 cross cable > > sh run : > Current configuration : 15381 bytes > ! > > ! > version 15.0 > service timestamps debug datetime msec > service timestamps log datetime msec > no service password-encryption > ! > hostname xxxx > ! > boot-start-marker > boot-end-marker > ! > logging buffered 51200 warnings > > no aaa new-model > > network-clock-participate wic 2 > ! > dot11 syslog > ip source-route > ! > ip cef > ! > ! > no ipv6 cef > multilink bundle-name authenticated > ! > ! > ! > isdn switch-type primary-qsig > ! > voice-card 0 > ! > ! > voice rtp send-recv > ! > voice service voip > allow-connections h323 to h323 > allow-connections h323 to sip > allow-connections sip to h323 > allow-connections sip to sip > redirect ip2ip > h323 > sip > header-passing > no call service stop > ! > voice class codec 1 > codec preference 1 g711ulaw > ! > voice class custom-cptone > dualtone disconnect > frequency 425 > cadence 250 250 > ! > ! > ! > ! > http client cache memory pool 15000 > http client cache memory file 500 > http client connection timeout 60 > http client connection idle timeout 10 > http client response timeout 30 > > mrcp client timeout connect 10 > mrcp client timeout message 10 > mrcp client rtpsetup enable > vxml tree memory 500 > vxml audioerror > vxml version 2.0 > ! > crypto pki trustpoint TP-self-signed-3307538538 > enrollment selfsigned > subject-name cn=IOS-Self-Signed-Certificate-3307538538 > revocation-check none > rsakeypair TP-self-signed-3307538538 > > ! > controller E1 0/2/0 > pri-group timeslots 1-4,16 service mgcp > ! > > interface GigabitEthernet0/0 > no ip address > duplex auto > speed auto > media-type rj45 > ! > > > interface GigabitEthernet0/0.1 > encapsulation dot1Q > ip address X.X.X.X 255.255.255.0 > ! > > ! > interface Serial0/2/0:15 > no ip address > encapsulation hdlc > isdn switch-type primary-qsig > isdn incoming-voice voice > isdn bind-l3 ccm-manager > no cdp enable > ! > ip forward-protocol nd > ! > ! > ip http server > ip http access-class 23 > ip http authentication local > ip http secure-server > ip http timeout-policy idle 60 life 86400 requests 10000 > ip route 0.0.0.0 0.0.0.0 X.X.X.X > ! > > ! > ! > control-plane > ! > call threshold global cpu-5sec low 70 high 85 > ! > voice-port 0/2/0:15 > ! > voice-port 0/3/0 > ! > voice-port 0/3/1 > ! > ccm-manager switchback immediate > ccm-manager fallback-mgcp > ccm-manager redundant-host X.X.x.x > ccm-manager mgcp > ccm-manager config server x.x.x.x > ! > mgcp > mgcp call-agent x.x.x.x service-type mgcp version 1.0 > mgcp bind control source-interface GigabitEthernet0/0.1 > mgcp bind media source-interface GigabitEthernet0/0.1 > ! > mgcp profile default > ! > ! > gateway > timer receive-rtp 1200 > ! > sip-ua > retry invite 1 > retry bye 1 > retry cancel 1 > timers expires 60000 > reason-header override > ! > ! > telephony-service > max-conferences 12 gain -6 > transfer-system full-consult > ! > > > thanks > > ------------------------------ > From: gogli...@gmail.com > Date: Mon, 16 Jan 2012 13:29:49 +0100 > > Subject: Re: [OSL | CCIE_Voice] MGCP Registration > To: mercy_for_...@hotmail.com > CC: ccie_voice@onlinestudylist.com > > > Hi, > > The card is supported: > http://www.cisco.com/en/US/prod/collateral/routers/ps259/product_data_sheet0900aecd8057f2e0.pdf > > Paste your voice gateway configuration, there must be a problem somewhere. > > Cheers, > > On Sun, Jan 15, 2012 at 8:45 PM, mercy forall > <mercy_for_...@hotmail.com>wrote: > > > Hi, > > I think the issue from card , i need to sure the CUCM support > VWIC-1MFT-G703 card or not , because i did not fine it in cucm > mgcp configuration and i use VWIC-1MFT-E1 > > i made all configuration , and made same configuration on other and it is > work fine , from where i can check if is it support tor not ? > > > From: ccie_voice-requ...@onlinestudylist.com > > Subject: CCIE_Voice Digest, Vol 71, Issue 54 > > To: ccie_voice@onlinestudylist.com > > Date: Sun, 15 Jan 2012 06:01:19 -0500 > > > > Send CCIE_Voice mailing list submissions to > > ccie_voice@onlinestudylist.com > > > > To subscribe or unsubscribe via the World Wide Web, visit > > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > or, via email, send a message with subject or body 'help' to > > ccie_voice-requ...@onlinestudylist.com > > > > You can reach the person managing the list at > > ccie_voice-ow...@onlinestudylist.com > > > > When replying, please edit your Subject line so it is more specific > > than "Re: Contents of CCIE_Voice digest..." > > > > > > Today's Topics: > > > > 1. Re: AAR for UCCX (Mohammed Al Baqari) > > 2. BAT csv template for CUC 7 (donny f) > > 3. MGCP Registration (mercy forall) > > 4. Re: AAR for UCCX (datucha123 datucha123) > > 5. Re: MGCP Registration (datucha123 datucha123) > > > > > > ---------------------------------------------------------------------- > > > > Message: 1 > > Date: Sun, 15 Jan 2012 02:24:54 +0400 > > From: "Mohammed Al Baqari" <baqari.voic...@gmail.com> > > To: "'datucha123 datucha123'" <datucha...@gmail.com> > > Cc: ccie_voice@onlinestudylist.com > > Subject: Re: [OSL | CCIE_Voice] AAR for UCCX > > Message-ID: <078201ccd30b$597061a0$0c5124e0$@gmail.com> > > Content-Type: text/plain; charset="us-ascii" > > > > Hi, > > > > > > > > I haven't tested this. But my info is based on CUCM SRND. They haven't > given > > any exception on AAR and CTI inter-operability. Can you please highlight > > further. > > > > > > > > "AAR does not support CTI route points as the origin or the destination > of > > calls. Also, AAR is incompatible with the Extension Mobility feature when > > users roam across different sites." > > > > > > > > Regards, > > > > Mohammed Al Baqari > > > > > > > > From: datucha123 datucha123 [mailto:datucha...@gmail.com] > > Sent: Sunday, January 15, 2012 1:03 AM > > To: Mohd Baqari > > Cc: ccie_voice@onlinestudylist.com > > Subject: Re: [OSL | CCIE_Voice] AAR for UCCX > > > > > > > > AAR is supported with CTI, when it is registered. For instance the CTI > Route > > Point supports AAR, when it is registered. But as soon as it will > unregister > > (or some Dummy CTI Route Point, which never gets registered) does not > > support AAR. > > > > > > > > > > > > > > On Sat, Jan 14, 2012 at 10:29 PM, Mohd Baqari <baqari.voic...@gmail.com> > > wrote: > > > > Hi Datucha, > > > > In your scenario whats confusing me is how aar is triggered. As far as I > > know AAR isn't supported with CTI > > > > Regards, > > Mohammed Al Baqari > > > > Sent from my iPhone > > > > > > On Jan 8, 2012, at 9:11 PM, datucha123 datucha123 <datucha...@gmail.com> > > wrote: > > > > > Hello, > > > > > > I have been making a test and find out the following issue: > > > > > > So, I set the AAR Mask to CTI Route Points Line Settings, and the calls > > from Branch1 to UCCX when there was no WAN bandwidth available were > routed > > through PSTN successfully. > > > > > > I have not set any AAR Group and AAR CSS for CTI ports, but the HQ > gateway > > has them. > > > > > > So when I called the UCCX IVR (simpla AA script) through HQ Gateway and > > dialed the Branch 1 Phones extensions, the call has been routed through > PSTN > > based on CAC restrictions. Well that's ok with CAC. But I cannot > understand > > how the AAR got worked, when neither CTI ports nor the CTI Route Point > had > > any AAR configuration (AAR Mask has been also removed from the CTI RP > Line). > > > HQ Gateway had the AAR Group and CSS set. So based on that, UCCX took > the > > HQ gateway setttings of AAR and made a call? > > > > > > > > > > > > > > > > > > > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, > please > > visit www.ipexpert.com <http://www.ipexpert.com/> > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > </archives/ccie_voice/attachments/20120115/75ebf1e2/attachment-0001.html> > > > > ------------------------------ > > > > Message: 2 > > Date: Sat, 14 Jan 2012 23:13:22 -0700 > > From: donny f <f.faraday...@gmail.com> > > To: ccie_voice@onlinestudylist.com > > Subject: [OSL | CCIE_Voice] BAT csv template for CUC 7 > > Message-ID: > > <CA+jB2JX19oA3d8=5mgzoqu08tg1isgz_jeqtqpkhvsvsi3t...@mail.gmail.com> > > Content-Type: text/plain; charset=ISO-8859-1 > > > > hi all, > > > > anyone know where to find the BAT template for Unity connection 7 ? > > > > tks > > > > > > ------------------------------ > > > > Message: 3 > > Date: Sun, 15 Jan 2012 08:16:16 +0000 > > From: mercy forall <mercy_for_...@hotmail.com> > > To: <ccie_voice@onlinestudylist.com> > > Subject: [OSL | CCIE_Voice] MGCP Registration > > Message-ID: <snt125-w55fc3dce00b1c1886511b6b5...@phx.gbl> > > Content-Type: text/plain; charset="iso-8859-1" > > > > > > > Hi, > > > > i have 3845 with VWIC-1MFT-G703 > > i configured mgcp but it is bending in registering on sh ccm-manager > > i did not find VWIC-1MFT-G703 on CUCM 7 , i use VWIC-1MFT-E1 , > > Are this card supported in mgcp ? > > thanks > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > </archives/ccie_voice/attachments/20120115/836824ad/attachment-0001.html> > > > > ------------------------------ > > > > Message: 4 > > Date: Sun, 15 Jan 2012 14:59:23 +0400 > > From: datucha123 datucha123 <datucha...@gmail.com> > > To: Mohammed Al Baqari <baqari.voic...@gmail.com> > > Cc: ccie_voice@onlinestudylist.com > > Subject: Re: [OSL | CCIE_Voice] AAR for UCCX > > Message-ID: > > <capz0ugndjv3gpcerhn0djppch31jquynob3bjtwj5urpon3...@mail.gmail.com> > > Content-Type: text/plain; charset="windows-1252" > > > > I have not testeed AAR with EM, but for CTI RP I have made it and it > works. > > > > Maybe I made the wrong test with CTI RP, but the fact is that I could > call > > the UCCX IVR from Branch 1 IP phones when there was no enough bandwidth > on > > the WAN link, and the call to UCCX was routed through PSTN. > > > > On Sun, Jan 15, 2012 at 2:24 AM, Mohammed Al Baqari < > > baqari.voic...@gmail.com> wrote: > > > > > Hi,**** > > > > > > ** ** > > > > > > I haven?t tested this. But my info is based on CUCM SRND. They haven?t > > > given any exception on AAR and CTI inter-operability. Can you please > > > highlight further.**** > > > > > > ** ** > > > > > > ?AAR does not support CTI route points as the origin or the destination > > > of calls. Also, AAR is incompatible with the Extension Mobility feature > > > when users roam across different sites.?**** > > > > > > ** ** > > > > > > Regards,**** > > > > > > Mohammed Al Baqari**** > > > > > > ** ** > > > > > > *From:* datucha123 datucha123 [mailto:datucha...@gmail.com] > > > *Sent:* Sunday, January 15, 2012 1:03 AM > > > *To:* Mohd Baqari > > > *Cc:* ccie_voice@onlinestudylist.com > > > *Subject:* Re: [OSL | CCIE_Voice] AAR for UCCX**** > > > > > > ** ** > > > > > > AAR is supported with CTI, when it is registered. For instance the CTI > > > Route Point supports AAR, when it is registered. But as soon as it will > > > unregister (or some Dummy CTI Route Point, which never gets registered) > > > does not support AAR.**** > > > > > > **** > > > > > > > > > **** > > > > > > On Sat, Jan 14, 2012 at 10:29 PM, Mohd Baqari < > baqari.voic...@gmail.com> > > > wrote:**** > > > > > > Hi Datucha, > > > > > > In your scenario whats confusing me is how aar is triggered. As far as > I > > > know AAR isn't supported with CTI > > > > > > Regards, > > > Mohammed Al Baqari > > > > > > Sent from my iPhone**** > > > > > > > > > On Jan 8, 2012, at 9:11 PM, datucha123 datucha123 < > datucha...@gmail.com> > > > wrote: > > > > > > > Hello, > > > > > > > > I have been making a test and find out the following issue: > > > > > > > > So, I set the AAR Mask to CTI Route Points Line Settings, and the > calls > > > from Branch1 to UCCX when there was no WAN bandwidth available were > routed > > > through PSTN successfully. > > > > > > > > I have not set any AAR Group and AAR CSS for CTI ports, but the HQ > > > gateway has them. > > > > > > > > So when I called the UCCX IVR (simpla AA script) through HQ Gateway > and > > > dialed the Branch 1 Phones extensions, the call has been routed through > > > PSTN based on CAC restrictions. Well that's ok with CAC. But I cannot > > > understand how the AAR got worked, when neither CTI ports nor the CTI > Route > > > Point had any AAR configuration (AAR Mask has been also removed from > the > > > CTI RP Line). > > > > HQ Gateway had the AAR Group and CSS set. So based on that, UCCX took > > > the HQ gateway setttings of AAR and made a call? > > > > > > > > > > > > > > > > > > > >**** > > > > > > > > _______________________________________________ > > > > For more information regarding industry leading CCIE Lab training, > > > please visit www.ipexpert.com > > > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > www.PlatinumPlacement.com <http://www.platinumplacement.com/>**** > > > > > > ** ** > > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: > </archives/ccie_voice/attachments/20120115/7fc3db5a/attachment-0001.html> > > > > ------------------------------ > > > > Message: 5 > > Date: Sun, 15 Jan 2012 15:01:17 +0400 > > From: datucha123 datucha123 <datucha...@gmail.com> > > To: mercy forall <mercy_for_...@hotmail.com> > > Cc: ccie_voice@onlinestudylist.com > > Subject: Re: [OSL | CCIE_Voice] MGCP Registration > > Message-ID: > > <CAPZ0ugNYUsKbpK96FOc+uXtGUkCBUU0a0idazm5ZPCke9iR=b...@mail.gmail.com> > > Content-Type: text/plain; charset="iso-8859-1" > > > > > first of all make sure that the L2 is up for the PRI, otherwise the MGCP > > gateway in CUCM will show unregistere status. > > > > On Sun, Jan 15, 2012 at 12:16 PM, mercy forall < > mercy_for_...@hotmail.com>wrote: > > > > > Hi, > > > > > > > > > i have 3845 with VWIC-1MFT-G703 > > > > > > i configured mgcp but it is bending in registering on sh ccm-manager > > > > > > i did not find VWIC-1MFT-G703 on CUCM 7 , i use VWIC-1MFT-E1 , > > > > > > Are this card supported in mgcp ? > > > > > > thanks > > > > > > _______________________________________________ > > > For more information regarding industry leading CCIE Lab training, > please > > > visit www.ipexpert.com > > > > > > Are you a CCNP or CCIE and looking for a job? Check out > > > www.PlatinumPlacement.com <http://www.platinumplacement.com/> > > > > > -------------- next part -------------- > > An HTML attachment was scrubbed... > > URL: </archives/ccie_voice/attachments/20120115/d37d24c3/attachment.html> > > > > ------------------------------ > > > > _______________________________________________ > > CCIE_Voice mailing list > > CCIE_Voice@onlinestudylist.com > > http://onlinestudylist.com/mailman/listinfo/ccie_voice > > > > > > End of CCIE_Voice Digest, Vol 71, Issue 54 > > ****************************************** > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
