Hi list, I configured a GK with two zones: Zone UCM for CUCM Zone UCME for Br2 router
When I make Calls from CUCM to CME (3xxx) call fails as per debugs below. I'm not using any CUBE. Can please someone explain what's wrong with my config. zone local UCM cisco.com 10.10.200.3 zone local UCME cisco.com zone prefix UCM 1... gw-priority 10 gk-trunk_2 zone prefix UCM 1... gw-priority 9 gk-trunk_1 zone prefix UCM 1... gw-priority 0 BR2-RTR zone prefix UCME 3... zone prefix UCM 5... gw-priority 10 gk-trunk_2 zone prefix UCM 5... gw-priority 9 gk-trunk_1 zone prefix UCM 5... gw-priority 0 BR2-RTR no shutdown interface Loopback0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip id UCME ipaddr 10.10.200.3 1719 h323-gateway voip h323-id BR2-RTR h323-gateway voip tech-prefix 3 h323-gateway voip bind srcaddr 10.10.110.3 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: (3002) Matched tech-prefix 3 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: (3002) unresolved zone prefix, using source zone UCM May 26 18:37:05.630: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the source side, src_zonep=0x48C6E830 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: matched zone is UCM, and z_invianamelen=0 May 26 HQ-RTR(config-18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the destination side, dst_zonep=0x48C6E830 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: matched zone is UCM, and z_outvianamelen=0 May 26 18:37:05.630: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: returning default ingress network = 1 May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: (3002) tech-prefix gateway selection failed. May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/gk_rassrv_sep_arq: rassrv_get_addrinfo() failed (return code = 0x107)gk)# HQ-RTR(config-gk)#e May 26 18:37:15.518: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: got a TIMER event
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
