Why not try getting it to work first without the tech-prefix Try this:
gk shut zone local UCM cisco.com <http://cisco.com/> zone local UCME cisco.com <http://cisco.com/> zone prefix UCM 1... gw-priority 10 gk-trunk_2 zone prefix UCM 1... gw-priority 9 gk-trunk_1 zone prefix UCME 3... zone prefix UCM 5... gw-priority 10 gk-trunk_2 zone prefix UCM 5... gw-priority 9 gk-trunk_1 gw-type-prefix 1# default-technology no shutdown BR2 no gateway interface lo0 ip address 10.10.110.3 255.255.255.255 ip ospf network point-to-point h323-gateway voip interface h323-gateway voip id UCME ipaddr 10.10.110.1 (changed to lo0 of GK) h323-gateway voip h323-id BR2-RTR h323-gateway voip bind srcaddr 10.10.110.3 Gateway Get it working then play with technology prefixing From: A NN <prince_karim...@yahoo.com> Reply-To: A NN <prince_karim...@yahoo.com> Date: Wednesday, May 30, 2012 3:52 AM To: Kevin Spicer <ke...@kevinspicer.co.uk> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Subject: Re: [OSL | CCIE_Voice] Gatekeeper understanding Hi Kevin, Yes, gateway command was there and the "show gatek en" showed the BR2-RTR as registered. How does the technology prefix works in this situation (two zones)? From: Kevin Spicer To: A NN <prince_karim...@yahoo.com> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> Sent: Wednesday, 30 May 2012, 5:56 Subject: Re: [OSL | CCIE_Voice] Gatekeeper understanding Hi, is ucme registered to the gk? (gateway command missing?) On 30 May 2012 03:08, "A NN" wrote: > Hi list, > I configured a GK with two zones: > Zone UCM for CUCM > Zone UCME for Br2 router > > When I make Calls from CUCM to CME (3xxx) call fails as per debugs below. I'm > not using any CUBE. Can please someone explain what's wrong with my config. > > zone local UCM cisco.com <http://cisco.com> 10.10.200.3 > zone local UCME cisco.com <http://cisco.com> > zone prefix UCM 1... gw-priority 10 gk-trunk_2 > zone prefix UCM 1... gw-priority 9 gk-trunk_1 > zone prefix UCM 1... gw-priority 0 BR2-RTR > zone prefix UCME 3... > zone prefix UCM 5... gw-priority 10 gk-trunk_2 > zone prefix UCM 5... gw-priority 9 gk-trunk_1 > zone prefix UCM 5... gw-priority 0 BR2-RTR > no shutdown > > > interface Loopback0 > ip address 10.10.110.3 255.255.255.255 > ip ospf network point-to-point > h323-gateway voip interface > h323-gateway voip id UCME ipaddr 10.10.200.3 1719 > h323-gateway voip h323-id BR2-RTR > h323-gateway voip tech-prefix 3 > h323-gateway voip bind srcaddr 10.10.110.3 > > > > May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: > (3002) Matched tech-prefix 3 > May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: > (3002) unresolved zone prefix, using source zone UCM > May 26 18:37:05.630: > //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: returning > default ingress network = 1 > May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: > about to check the source side, src_zonep=0x48C6E830 > May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: > matched zone is UCM, and z_invianamelen=0 > May 26 > HQ-RTR(config-18:37:05.630: > //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the > destination side, dst_zonep=0x48C6E830 > May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: > matched zone is UCM, and z_outvianamelen=0 > May 26 18:37:05.630: > //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: returning > default ingress network = 1 > May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo: > (3002) tech-prefix gateway selection failed. > May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/gk_rassrv_sep_arq: > rassrv_get_addrinfo() failed (return code = 0x107)gk)# > HQ-RTR(config-gk)#e > May 26 18:37:15.518: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: got a TIMER > event > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com <http://www.ipexpert.com> > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com <http://www.PlatinumPlacement.com> _______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com
