Hi Kevin,
Yes, gateway command was there and the "show gatek en" showed the BR2-RTR as
registered.
How does the technology prefix works in this situation (two zones)?
________________________________
From: Kevin Spicer
To: A NN <prince_karim...@yahoo.com>
Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com>
Sent: Wednesday, 30 May 2012, 5:56
Subject: Re: [OSL | CCIE_Voice] Gatekeeper understanding
Hi, is ucme registered to the gk? (gateway command missing?)
On 30 May 2012 03:08, "A NN" wrote:
Hi list,
>I configured a GK with two zones:
>Zone UCM for CUCM
>Zone UCME for Br2 router
>
>
> When I make Calls from CUCM to CME (3xxx) call fails as per debugs below. I'm
>not using any CUBE. Can please someone explain what's wrong with my config.
>
> zone local UCM cisco.com 10.10.200.3
> zone local UCME cisco.com
> zone prefix UCM 1... gw-priority 10 gk-trunk_2
> zone prefix UCM 1... gw-priority 9 gk-trunk_1
> zone prefix UCM 1... gw-priority 0 BR2-RTR
> zone prefix UCME 3...
> zone prefix UCM 5... gw-priority 10 gk-trunk_2
> zone prefix UCM 5... gw-priority 9 gk-trunk_1
> zone prefix UCM 5... gw-priority 0 BR2-RTR
> no shutdown
>
>
>interface Loopback0
> ip address 10.10.110.3
255.255.255.255
> ip ospf network point-to-point
> h323-gateway voip interface
> h323-gateway voip id UCME ipaddr 10.10.200.3 1719
> h323-gateway voip h323-id BR2-RTR
> h323-gateway voip tech-prefix 3
> h323-gateway voip bind srcaddr 10.10.110.3
>
>
>
>May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo:
>(3002) Matched tech-prefix 3
>May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo:
>(3002) unresolved zone prefix, using source zone UCM
>May 26 18:37:05.630:
>//xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: returning
>default ingress network = 1
>May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone:
>about to check the source side, src_zonep=0x48C6E830
>May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone:
>matched zone is UCM, and z_invianamelen=0
>May 26
>HQ-RTR(config-18:37:05.630:
//80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone: about to check the
destination side, dst_zonep=0x48C6E830
>May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_arq_select_viazone:
>matched zone is UCM, and z_outvianamelen=0
>May 26 18:37:05.630:
>//xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_rassrv_get_ingress_network: returning
>default ingress network = 1
>May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/rassrv_get_addrinfo:
>(3002) tech-prefix gateway selection failed.
>May 26 18:37:05.630: //80849A2C1900/80849A2C1900/GK/gk_rassrv_sep_arq:
>rassrv_get_addrinfo() failed (return code = 0x107)gk)#
>HQ-RTR(config-gk)#e
>May 26 18:37:15.518: //xxxxxxxxxxxx/xxxxxxxxxxxx/GK/gk_process: got a TIMER
>event
>_______________________________________________
>For more information regarding industry leading CCIE Lab training, please
>visit www.ipexpert.com
>
>Are you a CCNP or CCIE and looking for a job? Check out
>www.PlatinumPlacement.com
>
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
