Well l would practice it just in case you get some crazy requirements that say 
to create a full PRI but busy out specific channels.

That is what this is best for,  busying out some channels to see if you problem 
is there


Sent from my iPad

On Jun 19, 2013, at 1:22 AM, Karen Johnson <karen.johnson...@yahoo.ca> wrote:

> tks Robert and Bill.
>  
> so in exam i will leave to default and not worry on this : "busy out" if 
> (Inhibit re-starts at PRI initialization is checked)
> 
> From: Robert Thomas <tho...@gmail.com>
> To: Karen Johnson <karen.johnson...@yahoo.ca> 
> Cc: "ccie_voice@onlinestudylist.com" <ccie_voice@onlinestudylist.com> 
> Sent: Sunday, June 16, 2013 9:42:51 PM
> Subject: Re: [OSL | CCIE_Voice] Change B-Channel Maintenance Status
> 
> Karen,
> 
> Those parameters are old story. The were used back in the 6608 days, have no 
> use on the current MGCP GW. If you configure your PRI as fractional with less 
> timeslots, CUCM would audit the port and the GW report back an error for that 
> endpoint, CUCM will then mark it out of service automatically. 
> 
> 
> 
> On Sun, Jun 16, 2013 at 2:25 PM, Karen Johnson <karen.johnson...@yahoo.ca> 
> wrote:
> when do MGCP, i come across service parameter "Change B-Channel Maintenance 
> Status" and they only have 5 box.
>  
> - does that mean in one cluster we can have 5 GW that use partial PRI with 
> MGCP ?
> - if i plan to use partial PRI in MGCP,   do i need to also "busy out " above 
> paramater or
>   "pri-group  timeslots 1-12,16 service mgcp"  command in GW is enough?
>  
> - based on UCM help page, we only need use "busy out" if (Inhibit re-starts 
> at PRI initialization is checked)
>   I just try to make sense of this statement
>  
> tks
> K.
>  
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit http://www.ipexpert.com/
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> http://www.platinumplacement.com/
> 
> 
> 
> -- 
> Robert Thomas Zamora
> tho...@gmail.com +50689389544
> http://cr.linkedin.com/pub/robert-thomas-zamora/29/913/8a8
> CCNP, CCNP Voice
> 
> 
> _______________________________________________
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
_______________________________________________
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Reply via email to