Hi Karen, Could you please post the config and sh version (I presume you are using your own rack)
In MGCP the D-Channel is backhauled to CM, and the moment connection to CCM is lost, it should remove "isdn bind-l3" command for the proper SRST operation, however upon detection of the WAN connection back to CCM, this command should automatically be added back, interestingly its not happening. A bug, may be? Regards Wilson Samuel From: Karen Johnson [mailto:karen.johnson...@yahoo.ca] Sent: Thursday, June 20, 2013 1:23 AM To: Samuel,W,Wilson,JKH3 R; ccie_voice@onlinestudylist.com Subject: Re: [OSL | CCIE_Voice] SRST back to normal mode -- PRI always down hi wilson, i use "ccm switchback immediate" and go to SRST by " ip route x.x.x.x null0 K From: "wilson.sam...@bt.com<mailto:wilson.sam...@bt.com>" <wilson.sam...@bt.com<mailto:wilson.sam...@bt.com>> To: karen.johnson...@yahoo.ca<mailto:karen.johnson...@yahoo.ca>; ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com> Sent: Wednesday, June 19, 2013 2:44:36 PM Subject: RE: [OSL | CCIE_Voice] SRST back to normal mode -- PRI always down Hi Karen, How are you switching between the SRST and UCM mode? More over, I think we shall need to verify if the configuration has the ccm-manager switchback. Could you please post your config ? Regards Wilson Samuel From: ccie_voice-boun...@onlinestudylist.com<mailto:ccie_voice-boun...@onlinestudylist.com> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Karen Johnson Sent: Wednesday, June 19, 2013 2:02 PM To: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com> Cc: ccie_voice@onlinestudylist.com<mailto:ccie_voice@onlinestudylist.com> Subject: [OSL | CCIE_Voice] SRST back to normal mode -- PRI always down all, when i switch to SRST and back to UCM mode, most of time my PRI is always down. And i need to do "no isdn bind-l3" and "isdn bind-l3" is this expected ? and how abot when proctor test our lab? K
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com