You need to put in extra layer of policy-map for this. class-map match-any RTP****
match protocol rtp**** class-map match-any SIG**** match protocol skinny**** match protocol sip**** match protocol h323**** match protocol custom-01**** !**** policy-map LLQ class SIG**** bandwidth 192**** class RTP**** priority 64**** ** ! policy-map FR-Branch1**** class class-default shape average 364000 !-- not sure if this is mandatory service-policy LLQ map-class frame-relay FR-MC-BR1**** service-policy output FR-Branch1 On Sun, Aug 18, 2013 at 5:09 PM, <wilson.sam...@bt.com> wrote: > Hi All,**** > > ** ** > > For some reason I am not able to configure the Frame Policy-map applied > via the map-class command:**** > > ** ** > > CorpHQ#sh policy**** > > CorpHQ#sh policy-map inter **** > > ** ** > > CorpHQ#**** > > ** ** > > I have checked everything and nothing seem to be wrong.**** > > ** ** > > Is there any special / hidden command that I shall need to invoke, in > order to apply the Policy-Map on FR Subinterface via the map-class.**** > > ** ** > > Any help would be greatly appreciated.**** > > ** ** > > Please find below my configuration:**** > > ** ** > > ** ** > > Regardss**** > > --------------------------------**** > > ** ** > > ** ** > > ** ** > > ** ** > > class-map match-any RTP**** > > match protocol rtp**** > > class-map match-any SIG**** > > match protocol skinny**** > > match protocol sip**** > > match protocol h323**** > > match protocol custom-01**** > > !**** > > policy-map FR-Branch1**** > > class SIG**** > > bandwidth 192**** > > class RTP**** > > priority 64**** > > ** ** > > ** ** > > interface Serial0/0/1:0**** > > description == Frame-Relay Circuit to WAN**** > > no ip address**** > > encapsulation frame-relay**** > > no keepalive**** > > cdp enable**** > > no frame-relay inverse-arp**** > > frame-relay lmi-type ansi**** > > !**** > > interface Serial0/0/1:0.1 point-to-point**** > > description == FR To BR1**** > > ip address 177.0.101.1 255.255.255.0**** > > snmp trap link-status**** > > frame-relay interface-dlci 101 **** > > class FR-MC-BR1**** > > ** ** > > !**** > > map-class frame-relay FR-MC-BR1**** > > service-policy output FR-Branch1**** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > ** ** > > Kind Regards**** > > Wilson Samuel**** > > ** ** > > Wilson Samuel | East Region | BT Global Services |wilson.sam...@bt.com| > http://globalservices.bt.com/**** > > **** > > This e-mail contains information from BT which may be privileged or > confidential. It's meant only for the individual(s) or entity named above. > If you're not the intended recipient, note that disclosing, copying, > distributing or using this information is prohibited. If you've received > this e-mail in error, please let me know immediately on the e-mail address > above. Thank you. We monitor our e-mail system, and may record your e-mails. > **** > > ** ** > > BT Americas Inc., 150 Newport Avenue Ext., Quincy, MA 02171 > USA > BT Americas Inc. is a wholly owned subsidiary of British > Telecommunications plc. **** > > ** ** > > ** ** > > Think before you print! Consider the environment before printing this > email!**** > > ** ** > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com >
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com