Thank you very much Khalid and somphol it was indeed the fr traffic-shaping that was missing
Thank you very much Sent from my iPhone On 18 Aug 2013, at 08:22, khaled Saholy <khaled_sah...@hotmail.com> wrote: > Yes for policy based shaping , you use the solution given by our friend. Mine > is for GTS. > > > > From: somp...@gmail.com > Date: Sun, 18 Aug 2013 18:44:20 +1000 > To: wilson.sam...@bt.com > CC: ccie_voice@onlinestudylist.com > Subject: Re: [OSL | CCIE_Voice] Frame-Relay Sh policy-map interface > > You need to put in extra layer of policy-map for this. > > class-map match-any RTP > > match protocol rtp > > class-map match-any SIG > > match protocol skinny > > match protocol sip > > match protocol h323 > > match protocol custom-01 > > ! > > > > policy-map LLQ > > class SIG > > bandwidth 192 > > class RTP > > priority 64 > > ! > > > policy-map FR-Branch1 > > class class-default > > shape average 364000 !-- not sure if this is mandatory > > service-policy LLQ > > > > map-class frame-relay FR-MC-BR1 > > service-policy output FR-Branch1 > > > > > > On Sun, Aug 18, 2013 at 5:09 PM, <wilson.sam...@bt.com> wrote: > Hi All, > > > > For some reason I am not able to configure the Frame Policy-map applied via > the map-class command: > > > > CorpHQ#sh policy > > CorpHQ#sh policy-map inter > > > > CorpHQ# > > > > I have checked everything and nothing seem to be wrong. > > > > Is there any special / hidden command that I shall need to invoke, in order > to apply the Policy-Map on FR Subinterface via the map-class. > > > > Any help would be greatly appreciated. > > > > Please find below my configuration: > > > > > > Regardss > > -------------------------------- > > > > > > > > > > class-map match-any RTP > > match protocol rtp > > class-map match-any SIG > > match protocol skinny > > match protocol sip > > match protocol h323 > > match protocol custom-01 > > ! > > policy-map FR-Branch1 > > class SIG > > bandwidth 192 > > class RTP > > priority 64 > > > > > > interface Serial0/0/1:0 > > description == Frame-Relay Circuit to WAN > > no ip address > > encapsulation frame-relay > > no keepalive > > cdp enable > > no frame-relay inverse-arp > > frame-relay lmi-type ansi > > ! > > interface Serial0/0/1:0.1 point-to-point > > description == FR To BR1 > > ip address 177.0.101.1 255.255.255.0 > > snmp trap link-status > > frame-relay interface-dlci 101 > > class FR-MC-BR1 > > > > ! > > map-class frame-relay FR-MC-BR1 > > service-policy output FR-Branch1 > > > > > > > > > > > > > > > > Kind Regards > > Wilson Samuel > > > > Wilson Samuel | East Region | BT Global Services |wilson.sam...@bt.com | > http://globalservices.bt.com/ > > > > This e-mail contains information from BT which may be privileged or > confidential. It's meant only for the individual(s) or entity named above. If > you're not the intended recipient, note that disclosing, copying, > distributing or using this information is prohibited. If you've received this > e-mail in error, please let me know immediately on the e-mail address above. > Thank you. We monitor our e-mail system, and may record your e-mails. > > > > BT Americas Inc., 150 Newport Avenue Ext., Quincy, MA 02171 USA > > BT Americas Inc. is a wholly owned subsidiary of British Telecommunications > plc. > > > > > > Think before you print! Consider the environment before printing this email! > > > > > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > > > _______________________________________________ For more information > regarding industry leading CCIE Lab training, please visit www.ipexpert.com > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com > _______________________________________________ > For more information regarding industry leading CCIE Lab training, please > visit www.ipexpert.com > > Are you a CCNP or CCIE and looking for a job? Check out > www.PlatinumPlacement.com
_______________________________________________ For more information regarding industry leading CCIE Lab training, please visit www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out www.PlatinumPlacement.com