Found at least one issue, open trace next to a via on the adapter. Ran out of time to keep checking.
-pete On Tue, Mar 21, 2017 at 4:10 AM, Rik Bos via cctalk <cctalk@classiccmp.org> wrote: > The HP 9000/382 only supports SE scsi and the drive needs to be terminated. > > -Rik > > Van: Pete Lancashire via cctalk > Verzonden: dinsdag 21 maart 2017 07:17 > Aan: General > Onderwerp: Suggestions why SCSI 80 drive w/ SCSI2 (50) adapter will not > spin up ? > > Host is a HP 9000/382 > > Copied the orig drive using a linux box, adaptec 2940N and good old dd > > Then swapped drives, a unused 9 GB 80 pin with a Chinese 80 to 50 > adapter. > > Did have to issue a spin up command and then copied the data to this drive > again with dd. > > Powered all off, added a motor start jumper to the adapter and put it on > the > 9000/382. Motor will not start, added a jumper right on the drive, no spin. > > so .. any ideas what I'm doing wrong, or just try a different drive ? > > -pete > > >