I took a closer look at the adapter, and not only is the an cracked trace next to a via but a soldering​ short. The place in CN is sending me another one. For now I have put back the original drive. Somewhere in the junk is the solution to the next issue, either an old hub Tha has coax/BNC or the box of MAUs that came with the pallet of Sun pizza s
-Pete to much junk On Mar 21, 2017 5:22 PM, "Glen Slick via cctalk" <cctalk@classiccmp.org> wrote: > On Tue, Mar 21, 2017 at 5:49 AM, Pete Lancashire via cctalk > <cctalk@classiccmp.org> wrote: > > Found at least one issue, open trace next to a via on the adapter. Ran > out > > of time to keep checking. > > > > -pete > > I just checked my HP 9000/382 and found I put the dead original > Quantum 50-pin SCSI hard drive back in it. I must have been using a > 68-pin 9GB SCSI hard drive the last time I was tinkering with it, with > a 50-pin male / 68-pin male adapter. I don't remember having any > issues with that configuration. > > I did a clean install of HP-UX 9.10 on my 9000/382 from a B2378-87054 > CD image I got from hpmuseum.net > > http://hpmuseum.net/display_item.php?sw=525 > >