I would get it working on simH and then make an RL02 from the working image. PDP GUI is what I use for stuff like that.
On Fri, Jul 29, 2022 at 11:00 AM Bill Gunshannon via cctalk < cctalk@classiccmp.org> wrote: > On 7/29/22 10:53, Chris Zach via cctalk wrote: > > I know you can run 7m as I have a couple of RL01 packs with 7m on them. > > You needed two drives. > > > > RSX11/M 4.2 would probably be the best OS for a 34. > > > > On 7/26/2022 11:52 PM, devin davison via cctalk wrote: > >> Hello, > >> > >> Been a while since i last posted here. > >> > >> I have a few pdp 11/34 systems. The drives i am using are RL02 drives. > >> > >> Is it possible to install Ultrix on a 34? I have been testing out > >> Ultrix in > >> the simh emulator. I see during the install the 34 mentioned as a > >> recognized cpu type, but later in the install the system hangs. This > hang > >> does not occur if i emulate a later cpu system like the 11/83. > >> > >> Not sure if ultrix can be installed due to the memory limitation, if > not, > >> rsx will be my second choice. > >> > >> Hoping to have some real hardware running soon! > >> > >> Thanks, > >> > >> Devin D. > > > I didn't try installing but I grabbed a couple RL02 images I > already had and booted an 11/34 with them so it will run. I > may try an install and see what happens. > > bill > >