Hi,
since I upgraded my system, both hardware and software (Suse 7), I cannot
burn anymore.
Adaptec 29160,
intern: LVD-hard disk,
extern: Chassis with 3 devices (CDROM, CDRW, ZIP) at Adaptec's near port,
cable length: 2m
symptoms:
burning audio tracks sometimes leads to error messages (no underrun), fixing
the cd always fails
I also tried a 90 cm cable, but nothing changed.
Apart from that all devices work fine.
Any hints?
Markus
----------
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 0 = CD-DA
scsidev: '0,2,0'
scsibus: 0 target: 2 lun: 0
Linux sg driver version: 2.1.38
Using libscg version 'schily-0.1'
atapi: 0
Device type : Removable CD-ROM
Version : 2
Response Format: 2
Capabilities :
Vendor_info : 'YAMAHA '
Identifikation : 'CDR400t '
Revision : '1.0n'
Device seems to be: Yamaha CDR-400.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1176000 = 1148 KB
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 4
Is not unrestricted
Is not erasable
Disk sub type: Medium Type B, low Beta category (B-) (4)
ATIP start of lead in: -11624 (97:27/01)
ATIP start of lead out: 337349 (74:59/74)
Disk type: Long strategy type (Cyanine, AZO or similar)
Manuf. index: 34
Manufacturer: DIGITAL STORAGE TECHNOLOGY CO.,LTD
Blocks total: 337349 Blocks current: 337349 Blocks remaining: 337499
Starting to write CD/DVD at speed 1 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Performing OPC...
Writing time: 16.003s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable
errorCDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 2C 04 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x2C Qual 0x04 (current program area is empty) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.003s timeout 480s
Fixating time: 0.010s
--
To UNSUBSCRIBE, email to [EMAIL PROTECTED]
with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
